All MIBs › CADANT-CMTS-LAYER2CMTS-MIB › cadIfMacDomainEarlyAuthEncrCtrl
cadIfMacDomainEarlyAuthEncrCtrl
Module: CADANT-CMTS-LAYER2CMTS-MIB
OID (symbolic): CADANT-CMTS-LAYER2CMTS-MIB::cadIfMacDomainEarlyAuthEncrCtrl
OID (numeric): 1.3.6.1.4.1.4998.1.1.20.1.4.2.1.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute enables or disables early authentication and encryption (EAE) signaling for the MAC Domain. It also defines the type of EAE enforcement in the case that EAE is enabled. If set to 'disableEAE', EAE is disabled for the MAC Domain. If set to 'enableEaeRangingBasedEnforcement', 'enableEaeCapabilityBasedEnforcement' or 'enableEaeTotalEnforcement', EAE is enabled for the MAC Domain.
The following EAE enforcement methods are defined in the case where EAE signaling is enabled: The option 'enableEaeRangingBasedEnforcement' indicates EAE is enforced on CMs that perform ranging with a B-INIT-RNG-REQ message. The option 'enableEaeCapabilityBasedEnforcement' indicates EAE is enforced on CMs that perform ranging with a B-INIT-RNG-REQ message in which the EAE capability flag is set. The option 'enableEaeTotalEnforcement' indicates EAE is enforced on all CMs regardless of their EAE capabilities.
What is cadIfMacDomainEarlyAuthEncrCtrl?
Controls whether Early Authentication and Encryption (EAE) is enabled for this MAC domain and defines the enforcement mode when active. EAE requires cable modems to authenticate and begin encrypting traffic earlier in the registration process, improving security.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.1.4.2.1.23 snmpwalk -v2c -c public <target> CADANT-CMTS-LAYER2CMTS-MIB::cadIfMacDomainEarlyAuthEncrCtrl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.1.4.2.1.23.1 snmpget -v2c -c public <target> CADANT-CMTS-LAYER2CMTS-MIB::cadIfMacDomainEarlyAuthEncrCtrl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.20.1.4.2.1.23.1 i <value>
Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-LAYER2CMTS-MIB::cadIfMacDomainEarlyAuthEncrCtrl OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4998 | cadant | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1 | cadObjects | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1 | cadCable | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20 | cadLayer2 | CADANT-PRODUCTS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4998.1.1.20.1 | cadLayer2Mib | CADANT-CMTS-LAYER2CMTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20.1.4 | cadMacPortMIBObjects | CADANT-CMTS-LAYER2CMTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20.1.4.2 | cadIfMacDomainTable | CADANT-CMTS-LAYER2CMTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20.1.4.2.1 | cadIfMacDomainEntry | CADANT-CMTS-LAYER2CMTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20.1.4.2.1.23 | cadIfMacDomainEarlyAuthEncrCtrl | CADANT-CMTS-LAYER2CMTS-MIB |