CADANT-CMTS-LAYER2CMTS-MIB :: cadAgingNDCacheNotPresentMaxNumber

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCADANT-CMTS-LAYER2CMTS-MIBcadAgingNDCacheNotPresentMaxNumber

cadAgingNDCacheNotPresentMaxNumber

Module: CADANT-CMTS-LAYER2CMTS-MIB

OID (symbolic): CADANT-CMTS-LAYER2CMTS-MIB::cadAgingNDCacheNotPresentMaxNumber

OID (numeric): 1.3.6.1.4.1.4998.1.1.20.1.2.18

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The maximum number of ICMP unreachables transmitted while an ND cache entry is in the notPresent state. When the number of ICMPs indicated by this variable have been transmitted, the next packet that arrives for an ND cache entry in the notPresent state will cause that entry to transition to the searching state, unless cadAgingNDCacheNotPresentMinTime has not been reached yet.

What is cadAgingNDCacheNotPresentMaxNumber?

This configuration parameter sets the maximum number of ICMP unreachable responses the system will send for a neighbor discovery cache entry in the notPresent state before transitioning it to searching state. It controls how aggressively the system probes for unreachable destinations to optimize network resource usage. Operators would adjust this value to balance between responsiveness to network changes and network load from probe traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.1.2.18
snmpwalk -v2c -c public <target> CADANT-CMTS-LAYER2CMTS-MIB::cadAgingNDCacheNotPresentMaxNumber

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.1.2.18.1
snmpget -v2c -c public <target> CADANT-CMTS-LAYER2CMTS-MIB::cadAgingNDCacheNotPresentMaxNumber.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.20.1.2.18.1 i <value>

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-LAYER2CMTS-MIB::cadAgingNDCacheNotPresentMaxNumber OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4998cadantCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1cadObjectsCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1cadCableCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1.20cadLayer2CADANT-PRODUCTS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4998.1.1.20.1cadLayer2MibCADANT-CMTS-LAYER2CMTS-MIB
1.3.6.1.4.1.4998.1.1.20.1.2cadAgingCADANT-CMTS-LAYER2CMTS-MIB
1.3.6.1.4.1.4998.1.1.20.1.2.18cadAgingNDCacheNotPresentMaxNumberCADANT-CMTS-LAYER2CMTS-MIB