All MIBs › CABH-PS-DEV-MIB › cabhPsDev802dot11SecOperMode
cabhPsDev802dot11SecOperMode
Module: CABH-PS-DEV-MIB
OID (symbolic): CABH-PS-DEV-MIB::cabhPsDev802dot11SecOperMode
OID (numeric): 1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.2
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Indicates the Authentication and encryption mechanism to be enabled for the users and advertised in Beacon messages. Bits set to this object and not supported by the PS in cabhPsDev802dot11SecCapabilities are set to '0' without failing the SNMP set. Setting two bit that the PS does not support in combination returns an error 'wrongValue'. In particular: Setting to '1' both wep64(0)and wep128(1) bits returns an error'wrongValue'. Setting a combination of WEP bits (wep64(0) or wep128(1)) and wpaPSK bit returns is not a mandatory requirement, therefore an error 'wrongValue' may be reported.
Setting any bit to '1' must not affect the value of object dot11PrivacyInvoked.
If dot11PrivacyInvoked is set to 'false', the 80211 WEP security mechanism is disabled (see dot11PrivacyInvoked description) and the value of this object is not used.
Setting the wpaPSK(2) bit to '1' indicates the usage of WPA-PSK TKIP.
Note that to enable the PSK security mechanism, the value of cabhPsDev802dot11SecWPAPreSharedKey must be a non-zero length string.
What is cabhPsDev802dot11SecOperMode?
This object configures the active authentication and encryption mode advertised by the wireless interface in beacon messages. Any security bits specified that are not actually supported by the hardware are silently ignored.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.2 snmpwalk -v2c -c public <target> CABH-PS-DEV-MIB::cabhPsDev802dot11SecOperMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.2.1 snmpget -v2c -c public <target> CABH-PS-DEV-MIB::cabhPsDev802dot11SecOperMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.2.1 s <value>
Start monitoring CableHome-compliant residential gateways/cable modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CABH-PS-DEV-MIB::cabhPsDev802dot11SecOperMode OID value, configure state conditions and alerts, and monitor any CableHome-compliant residential gateways/cable modems from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.4 | clabProjCableHome | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.4.1 | cabhPsDevMib | CABH-PS-DEV-MIB |
| 1.3.6.1.4.1.4491.2.4.1.1 | cabhPsDevMibObjects | CABH-PS-DEV-MIB |
| 1.3.6.1.4.1.4491.2.4.1.1.6 | cabhPsDevMisc | CABH-PS-DEV-MIB |
| 1.3.6.1.4.1.4491.2.4.1.1.6.2 | cabhPsDev802dot11 | CABH-PS-DEV-MIB |
| 1.3.6.1.4.1.4491.2.4.1.1.6.2.2 | cabhPsDev802dot11SecTable | CABH-PS-DEV-MIB |
| 1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1 | cabhPsDev802dot11SecEntry | CABH-PS-DEV-MIB |
| 1.3.6.1.4.1.4491.2.4.1.1.6.2.2.1.2 | cabhPsDev802dot11SecOperMode | CABH-PS-DEV-MIB |