BroadworksMaintenance

All MIBs › BroadworksMaintenance

Organization: Broadsoft, Inc

Last Updated: 2006--0-6-

Category: Telephony and VoIP, Vendor: BroadSoft

Description: Manages maintenance mode and scheduled downtime notifications for BroadSoft BroadWorks VoIP platform.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BroadworksMaintenance?

This is a BroadSoft (BroadWorks platform) vendor MIB dedicated to maintenance-mode signaling for the BroadWorks VoIP application server platform, used to notify management systems of scheduled downtime and maintenance-window state changes. It exposes conformance/compliance group definitions tied to maintenance-mode notifications rather than a large set of runtime data tables. It is used for monitoring the software-level operational state of the platform in a narrow but important way — signaling when the system is entering or has entered a planned maintenance window, which lets monitoring systems suppress false alerts during expected downtime rather than reflecting general hardware health. It is part of the broader Broadsoft enterprise MIB suite and depends on that vendor's system management information structure for its object identifier tree. It is typically deployed in VoIP service-provider environments running BroadWorks application servers, where BroadworksMaintenance SNMP monitoring communicates planned maintenance windows to upstream NMS/OSS systems.

IPNetwork Monitor allows you to monitor SNMP objects defined in BroadworksMaintenance. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BroadSoft BroadWorks VoIP application server

Monitoring Examples

The available sample objects (bwMtcMibGroups, bwMtcMibCompliancy) are conformance/compliance definitions rather than runtime data objects, so a concrete polling scenario cannot be described from real monitorable objects in the provided data; in practice, an NMS would subscribe to this MIB's maintenance-mode traps/notifications to suppress alerting during a scheduled BroadWorks maintenance window.

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
broadsoft	1.3.6.1.4.1.6431			This is the System Management Information structure for the Broadsoft enterprise.
broadworks	1.3.6.1.4.1.6431.1
STR bwActiveSoftwareVersion	1.3.6.1.4.1.6431.1.1.2.1.3	DisplayString	read-only	Gives the version of the active software version. An operator can change the active software version by setting this field.
INT bwAdminState	1.3.6.1.4.1.6431.1.1.2.1.4	INTEGER	read-write	Server admin state. 0- Lock, 1- Locking, 2- Unlock, 3- ShuttingDown, 4- Stopped, 5- Forced Lock
INT bwAlarmThresholdControl	1.3.6.1.4.1.6431.1.1.3.3.1.1.11	INTEGER	read-write	This scalar controls the life cycle of the threshold. Setting this threshold to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this threshold to delete(2) removes the entry.
bwAlarmThresholdEntry	1.3.6.1.4.1.6431.1.1.3.3.1.1		not-accessible	This row contains information on a particular alarm threshold
U32 bwAlarmThresholdIndex	1.3.6.1.4.1.6431.1.1.3.3.1.1.1	Unsigned32	read-only	This integer represents the index of an alarm threshold in the system
I32 bwAlarmThresholdMaxNumTrapsPerTimePeriod	1.3.6.1.4.1.6431.1.1.3.3.1.1.3	Integer32	read-write	The maximum number of traps that the system outputs per sliding time period. If set to 0 (zero), the alarm is suppressed and the system does not output any trap for this alarm filter.
INT bwAlarmThresholdMinimumSeverity	1.3.6.1.4.1.6431.1.1.3.3.1.1.10	INTEGER	read-write	This is the minimum alarm severity under which alarms start to be discarded.
STR bwAlarmThresholdName	1.3.6.1.4.1.6431.1.1.3.3.1.1.2	DisplayString	read-write	The name of an alarm or DEFAULT if the threshold applies to all alarms in the system
I32 bwAlarmThresholdProblemTextVarNum1	1.3.6.1.4.1.6431.1.1.3.3.1.1.5	Integer32	read-write	To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero).
I32 bwAlarmThresholdProblemTextVarNum2	1.3.6.1.4.1.6431.1.1.3.3.1.1.6	Integer32	read-write	To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero).
I32 bwAlarmThresholdProblemTextVarNum3	1.3.6.1.4.1.6431.1.1.3.3.1.1.7	Integer32	read-write	To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero).
I32 bwAlarmThresholdProblemTextVarNum4	1.3.6.1.4.1.6431.1.1.3.3.1.1.8	Integer32	read-write	To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero).
I32 bwAlarmThresholdProblemTextVarNum5	1.3.6.1.4.1.6431.1.1.3.3.1.1.9	Integer32	read-write	To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero).
bwAlarmThresholdTable	1.3.6.1.4.1.6431.1.1.3.3.1		not-accessible	Table of all the thresholds set against alarms in the system
I32 bwAlarmThresholdTimePeriodInSeconds	1.3.6.1.4.1.6431.1.1.3.3.1.1.4	Integer32	read-write	The time period used for threshold calculation, in seconds.
INT bwCounterThresholdControl	1.3.6.1.4.1.6431.1.1.3.1.1.1.8	INTEGER	read-write	This scalar controls the life cycle of the threshold. Setting this counter to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this counter to delete(2) removes the entry.
G32 bwCounterThresholdCurrentValue	1.3.6.1.4.1.6431.1.1.3.1.1.1.6	Gauge32	read-only	The threshold value at which the next alarm will be generated
STR bwCounterThresholdDescription	1.3.6.1.4.1.6431.1.1.3.1.1.1.2	DisplayString	read-write	A description for this threshold.
bwCounterThresholdEntry	1.3.6.1.4.1.6431.1.1.3.1.1.1		not-accessible	This row contains information on a particular counter threshold
U32 bwCounterThresholdIndex	1.3.6.1.4.1.6431.1.1.3.1.1.1.1	Unsigned32	read-only	This integer represents the index of a counter threshold in the system
I32 bwCounterThresholdInitialValue	1.3.6.1.4.1.6431.1.1.3.1.1.1.4	Integer32	read-write	The initial counter threshold value
STR bwCounterThresholdName	1.3.6.1.4.1.6431.1.1.3.1.1.1.3	DisplayString	read-write	The name of a counter.
I32 bwCounterThresholdOffsetValue	1.3.6.1.4.1.6431.1.1.3.1.1.1.5	Integer32	read-write	The offset to be added to the current threshold value once an alarm has been sent
INT bwCounterThresholdSeverity	1.3.6.1.4.1.6431.1.1.3.1.1.1.7	INTEGER	read-write	The severity of the alarm to be sent
bwCounterThresholdTable	1.3.6.1.4.1.6431.1.1.3.1.1		not-accessible	Table of all the thresholds set against counters in the system
INT bwGaugeThresholdControl	1.3.6.1.4.1.6431.1.1.3.2.1.1.7	INTEGER	read-write	This scalar controls the life cycle of the threshold. Setting this gauge to delete(2) removes the entry.
STR bwGaugeThresholdDescription	1.3.6.1.4.1.6431.1.1.3.2.1.1.2	DisplayString	read-write	A description for this threshold.
bwGaugeThresholdEntry	1.3.6.1.4.1.6431.1.1.3.2.1.1		not-accessible	This row contains information on a particular gauge threshold
U32 bwGaugeThresholdIndex	1.3.6.1.4.1.6431.1.1.3.2.1.1.1	Unsigned32	read-only	This integer represents the index of a gauge threshold in the system
STR bwGaugeThresholdName	1.3.6.1.4.1.6431.1.1.3.2.1.1.3	DisplayString	read-write	The name of a gauge.
I32 bwGaugeThresholdNotifyHigh	1.3.6.1.4.1.6431.1.1.3.2.1.1.5	Integer32	read-write	The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyLow level in a falling direction. Subsequent similar crossings of the NotifyLow level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyHigh level.
I32 bwGaugeThresholdNotifyLow	1.3.6.1.4.1.6431.1.1.3.2.1.1.4	Integer32	read-write	The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyHigh level in a rising direction. Subsequent similar crossings of the NotifyHigh level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyLow level.
INT bwGaugeThresholdSeverity	1.3.6.1.4.1.6431.1.1.3.2.1.1.6	INTEGER	read-write	The severity of the alarm to be sent
bwGaugeThresholdTable	1.3.6.1.4.1.6431.1.1.3.2.1		not-accessible	Table of all the thresholds set against gauges in the system
INT bwManagedObjectsAdminState	1.3.6.1.4.1.6431.1.1.2.3.1.1.5	INTEGER	read-write	The administrative state of a managed object controlled by BroadWorks. 0- Lock, 1- locking, 2- Unlock
bwManagedObjectsEntry	1.3.6.1.4.1.6431.1.1.2.3.1.1		not-accessible	This row contains information on a particular sub-managed object
U32 bwManagedObjectsIndex	1.3.6.1.4.1.6431.1.1.2.3.1.1.1	Unsigned32	read-only	This integer represents the a managed object index in the system
STR bwManagedObjectsName	1.3.6.1.4.1.6431.1.1.2.3.1.1.2	DisplayString	read-only	The name of a managed object controlled by BroadWorks
INT bwManagedObjectsOperationalState	1.3.6.1.4.1.6431.1.1.2.3.1.1.6	INTEGER	read-only	The operational state of a managed object controlled by BroadWorks. 0- Enabled, 1- Disabled
STR bwManagedObjectsProtocol	1.3.6.1.4.1.6431.1.1.2.3.1.1.3	DisplayString	read-only	The protocol supported by a managed object controlled by BroadWorks
bwManagedObjectsTable	1.3.6.1.4.1.6431.1.1.2.3.1		not-accessible	Table of all sub-managed objects under BroadWorks control
STR bwManagedObjectsType	1.3.6.1.4.1.6431.1.1.2.3.1.1.4	DisplayString	read-only	The type of a managed object controlled by BroadWorks
bwMoBasicCompliance	1.3.6.1.4.1.6431.1.1.20.2.1			BroadWorks Common managed object MIB compliance
bwMoDeviceGroup	1.3.6.1.4.1.6431.1.1.20.1.3			This group defines the counters used to manage the access or network devices monitored by this managed object.
bwMoReserveGroup	1.3.6.1.4.1.6431.1.1.20.1.10			MIB reserved section.
bwMoServerGroup	1.3.6.1.4.1.6431.1.1.20.1.1			This group defines managed object server attributes.
bwMoSoftwareVersionsGroup	1.3.6.1.4.1.6431.1.1.20.1.2			This group defines the software version attributes for the managed object.
bwMoThresholdsGroup	1.3.6.1.4.1.6431.1.1.20.1.4			This group defines the threshold control for this managed object.
bwMtcMibCompliancy	1.3.6.1.4.1.6431.1.1.20.2
bwMtcMibConformance	1.3.6.1.4.1.6431.1.1.20
bwMtcMibGroups	1.3.6.1.4.1.6431.1.1.20.1
INT bwOperationalState	1.3.6.1.4.1.6431.1.1.2.1.5	INTEGER	read-only	Server operational state. 0- Enabled, 1- Disabled
INT bwRedundancyType	1.3.6.1.4.1.6431.1.1.2.1.2	INTEGER	read-only	Gives the broadworks server redundancy type: { Primary \| Secondary \| NotRedundant }
INT bwReservedScalar	1.3.6.1.4.1.6431.1.1.10.1	INTEGER	read-only	This is a reserved counter
INT bwResetServer	1.3.6.1.4.1.6431.1.1.2.1.6	INTEGER	read-write	Remotely reset the BroadWorks server. The reset action kicks in when the counter is set to 1.
STR bwRevertBackupLocation	1.3.6.1.4.1.6431.1.1.2.1.9	DisplayString	read-write	Gives the location of the backup file to use if using the revert option of the reset command.
STR bwServerType	1.3.6.1.4.1.6431.1.1.2.1.1	DisplayString	read-only	Gives the broadworks server type: { Application Server \| Network Server \| Media Server \| Relay Server }
STR bwSoftwarePatchBundle	1.3.6.1.4.1.6431.1.1.2.2.3.1.8	DisplayString	read-only	Patch Bundle name of the patch.
bwSoftwarePatchEntry	1.3.6.1.4.1.6431.1.1.2.2.3.1		not-accessible	This row contains information on a particular braodworks patch installed on the server
INT bwSoftwarePatchHistNewState	1.3.6.1.4.1.6431.1.1.2.2.5.1.4	INTEGER	read-only	The new state of the patch.
bwSoftwarePatchHistoryEntry	1.3.6.1.4.1.6431.1.1.2.2.5.1		not-accessible	Entry of the patch history table containing history of operations applied to patches.
U32 bwSoftwarePatchHistoryIndex	1.3.6.1.4.1.6431.1.1.2.2.5.1.1	Unsigned32	read-only	This integer an index of a patch operation history.
bwSoftwarePatchHistoryTable	1.3.6.1.4.1.6431.1.1.2.2.5		not-accessible	This table contains information about all operation performed on patches.
STR bwSoftwarePatchHistPatchName	1.3.6.1.4.1.6431.1.1.2.2.5.1.2	DisplayString	read-only	The name of the patch against which the operation was applied.
STR bwSoftwarePatchHistTimeStamp	1.3.6.1.4.1.6431.1.1.2.2.5.1.3	DisplayString	read-only	The time stamp of the patch operation.
bwSoftwarePatchImpactedFileEntry	1.3.6.1.4.1.6431.1.1.2.2.6.1		not-accessible	Entry of the patch impacted file table containing information about files modified by patches.
STR bwSoftwarePatchImpactedFileFileName	1.3.6.1.4.1.6431.1.1.2.2.6.1.3	DisplayString	read-only	The name of an impacted file.
U32 bwSoftwarePatchImpactedFileIndex	1.3.6.1.4.1.6431.1.1.2.2.6.1.1	Unsigned32	read-only	This integer an index of an impacted file/patch name.
STR bwSoftwarePatchImpactedFilePatchName	1.3.6.1.4.1.6431.1.1.2.2.6.1.2	DisplayString	read-only	The name of the patch.
bwSoftwarePatchImpactedFileTable	1.3.6.1.4.1.6431.1.1.2.2.6		not-accessible	This table contains information about files modified by the patches applied on the system.
U32 bwSoftwarePatchIndex	1.3.6.1.4.1.6431.1.1.2.2.3.1.1	Unsigned32	read-only	This integer an index of a patch installed in the system
STR bwSoftwarePatchInstallDate	1.3.6.1.4.1.6431.1.1.2.2.3.1.5	DisplayString	read-only	This field was obsoleted in BroadWorks release 14.0.
STR bwSoftwarePatchName	1.3.6.1.4.1.6431.1.1.2.2.3.1.3	DisplayString	read-only	Patch name.
INT bwSoftwarePatchOperation	1.3.6.1.4.1.6431.1.1.2.2.3.1.7	INTEGER	read-write	This field was obsoleted in BroadWorks release 14.0.
INT bwSoftwarePatchState	1.3.6.1.4.1.6431.1.1.2.2.3.1.6	INTEGER	read-only	The state of the patch.
bwSoftwarePatchTable	1.3.6.1.4.1.6431.1.1.2.2.3		not-accessible	This table has an entry per service packs installed for each sofware versions
STR bwSoftwarePatchType	1.3.6.1.4.1.6431.1.1.2.2.3.1.4	DisplayString	read-only	Patch type. This field was obsoleted in BroadWorks release 14.0.
STR bwSoftwarePatchVersionName	1.3.6.1.4.1.6431.1.1.2.2.3.1.2	DisplayString	read-only	The name of a software load for which this patch applies. This field was obsoleted in BroadWorks release 14.0.
bwSoftwareThirdPartyEntry	1.3.6.1.4.1.6431.1.1.2.2.4.1		not-accessible	This row contains information on an installed 3rd party software version
U32 bwSoftwareThirdPartyIndex	1.3.6.1.4.1.6431.1.1.2.2.4.1.1	Unsigned32	read-only	This integer represents the a group index in the system
STR bwSoftwareThirdPartyName	1.3.6.1.4.1.6431.1.1.2.2.4.1.2	DisplayString	read-only	The name of a software load for which this service pack applies
INT bwSoftwareThirdPartyStatus	1.3.6.1.4.1.6431.1.1.2.2.4.1.4	INTEGER	read-only	The status of a 3rd party software version.
bwSoftwareThirdPartyTable	1.3.6.1.4.1.6431.1.1.2.2.4		not-accessible	This table has an entry for third party software version used by the BroadWorks server
STR bwSoftwareThirdPartyVersion	1.3.6.1.4.1.6431.1.1.2.2.4.1.3	DisplayString	read-only	A 3rd party software version id
bwSoftwareVersionEntry	1.3.6.1.4.1.6431.1.1.2.2.2.1		not-accessible	This row contains information on a particular braodworks software version installed on the server
U32 bwSoftwareVersionIndex	1.3.6.1.4.1.6431.1.1.2.2.2.1.1	Unsigned32	read-only	This integer represents the a group index in the system
STR bwSoftwareVersionInstallDate	1.3.6.1.4.1.6431.1.1.2.2.2.1.3	DisplayString	read-only	Installation date for this software version.
STR bwSoftwareVersionName	1.3.6.1.4.1.6431.1.1.2.2.2.1.2	DisplayString	read-only	The name of a software load installed on the server.
INT bwSoftwareVersionStatus	1.3.6.1.4.1.6431.1.1.2.2.2.1.4	INTEGER	read-only	The status of a software version.
bwSoftwareVersionTable	1.3.6.1.4.1.6431.1.1.2.2.2		not-accessible	This table has an entry per software version installed on the server
bwSubComponentEntry	1.3.6.1.4.1.6431.1.1.2.1.7.1		not-accessible	This row contains information about a software component in the system
U32 bwSubComponentIndex	1.3.6.1.4.1.6431.1.1.2.1.7.1.1	Unsigned32	read-only	This integer represents the a software component index in the system
STR bwSubComponentInfo	1.3.6.1.4.1.6431.1.1.2.1.7.1.3	DisplayString	read-only	Displays status information about the component
STR bwSubComponentName	1.3.6.1.4.1.6431.1.1.2.1.7.1.2	DisplayString	read-only	The name of an exposed subcomponent
bwSubComponentTable	1.3.6.1.4.1.6431.1.1.2.1.7		not-accessible	This table exposes some key BroadWorks server sub components. It may or may not be empty depending on the server
STR bwTargetSoftwareVersion	1.3.6.1.4.1.6431.1.1.2.1.8	DisplayString	read-write	Gives the target software version. If the server is reset, the active server software version will be updated.
INT bwUpdateSoftwareVersionTable	1.3.6.1.4.1.6431.1.1.2.2.1	INTEGER	read-write	This counter is used to reload the installed software table. To do so, just set this register to 1 (reload)
common	1.3.6.1.4.1.6431.1.1
managedObjects	1.3.6.1.4.1.6431.1.1.2
moDeviceModule	1.3.6.1.4.1.6431.1.1.2.3
moServerModule	1.3.6.1.4.1.6431.1.1.2.1
moSoftwareVersionModule	1.3.6.1.4.1.6431.1.1.2.2
reservedModule	1.3.6.1.4.1.6431.1.1.10
thAlarmModule	1.3.6.1.4.1.6431.1.1.3.3
thCounterModule	1.3.6.1.4.1.6431.1.1.3.1
thGaugeModule	1.3.6.1.4.1.6431.1.1.3.2
thresholds	1.3.6.1.4.1.6431.1.1.3

RFC description

System Management Information structure for Broadsoft enterprise communication platforms and servers.

Start monitoring BroadSoft BroadWorks VoIP application server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BroadworksMaintenance

What Is BroadworksMaintenance?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description