BW-BroadworksXtendedServicesPlatform

All MIBs › BW-BroadworksXtendedServicesPlatform

Organization: Broadsoft, Inc

Last Updated: 2008-10-28

Category: Telephony and VoIP, Vendor: BroadSoft

Description: Monitors BroadSoft BroadWorks extended services platform application status and service metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BW-BroadworksXtendedServicesPlatform?

BW-BroadworksXtendedServicesPlatform is a BroadSoft BroadWorks VoIP/UC MIB intended to capture performance measurements for the Xtended Services Platform (XSP) application tier, per its module description. The sample objects available are limited to conformance/grouping definitions (bwXspMibGroups, bwXspMibCompliancy) rather than runtime leaf data objects. Its stated purpose is software/service performance monitoring of the XSP component -- such platforms typically track service-level metrics like request volume, session counts, or application health, though the specific leaf objects aren't present in the data provided here. It is part of the broader BroadSoft BroadWorks MIB family and would be used alongside other BW-* MIBs, such as the Application Server fault MIB, for full platform observability. It is deployed on BroadSoft BroadWorks XSP servers within a hosted VoIP/UC service provider's application server farm. Network engineers evaluating or troubleshooting this functionality can download the BW-BroadworksXtendedServicesPlatform file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BW-BroadworksXtendedServicesPlatform. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BroadSoft BroadWorks Xtended Services Platform (XSP) server

Monitoring Examples

The sample objects available (bwXspMibGroups, bwXspMibCompliancy) are conformance/grouping definitions rather than runtime leaf objects, so a concrete polling scenario cannot be fully grounded in this data. The module's stated purpose is capturing XSP performance measurements, which in practice would involve polling per-service performance metrics, though the exact leaf object names are not present in the provided sample.

What Can Be Monitored

XSP application performance measurements
MIB conformance/compliance status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using bwXspAuthenticationAttempts OID:

Select a BroadSoft BroadWorks VoIP/UC application server as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type bwXspAuthenticationAttempts into the Find box to locate it in the OID tree, then select it and click OK. This counter is incremented when the XSP sends an authentication message to the Authentication Server, e.g. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
broadsoft	1.3.6.1.4.1.6431			The BW-BroadworksXtendedServicesPlatform.mib is introduces to capture the performance measurements for the BroadWorks Xtended Services Platform.
broadworks	1.3.6.1.4.1.6431.1
bwXtendedServicesPlatform	1.3.6.1.4.1.6431.1.12
protocols	1.3.6.1.4.1.6431.1.12.1
bcct	1.3.6.1.4.1.6431.1.12.1.1
bwXspCommonCommStatsTable	1.3.6.1.4.1.6431.1.12.1.1.1		not-accessible	This table contains counters for BCCT for the XSP process.
bwXspCommonCommStatsEntry	1.3.6.1.4.1.6431.1.12.1.1.1.1		not-accessible	Definition of the entries for bwOCSCommonCommStatsTable.
U32 bwXspCommonCommStatsIndex	1.3.6.1.4.1.6431.1.12.1.1.1.1.1	Unsigned32	read-only	This integer represents an index in table bwXspCommonCommStatsTable. The index represents a connection for a specific Host-Interfacece-Protocol combination.
STR bwXspCommonCommHost	1.3.6.1.4.1.6431.1.12.1.1.1.1.2	DisplayString	read-only	The address of a host connected to the BroadWorks Common Communication Protocol.
STR bwXspCommonCommInterface	1.3.6.1.4.1.6431.1.12.1.1.1.1.3	DisplayString	read-only	The IP address of a local interface that a protocol is bound to.
STR bwXspCommonCommProtocol	1.3.6.1.4.1.6431.1.12.1.1.1.1.4	DisplayString	read-only	The name of a BroadWorks Common Communication Protocol client protocol, e.g. OCI.
C32 bwXspCommonCommAcceptedOutboundConnections	1.3.6.1.4.1.6431.1.12.1.1.1.1.5	Counter32	read-write	This counter is incremented whenever a client in this process connects to the framework to a remote host, using the interface and protocol.
C32 bwXspCommonCommAcceptedInboundConnections	1.3.6.1.4.1.6431.1.12.1.1.1.1.6	Counter32	read-write	This counter is incremented whenever a client in this process connects to the framework from a remote host, using the interface and protocol.
C32 bwXspCommonCommRejectedOutboundConnections	1.3.6.1.4.1.6431.1.12.1.1.1.1.7	Counter32	read-write	This counter is incremented whenever a client connection request going from this process to a remote host and going through this interface has been rejected for a particular protocol.
C32 bwXspCommonCommRejectedInboundConnections	1.3.6.1.4.1.6431.1.12.1.1.1.1.8	Counter32	read-write	This counter is incremented whenever a client connection request coming to this host and going through this interface has been rejected by the framework for a particular protocol.
C32 bwXspCommonCommOutputMessagesProcessed	1.3.6.1.4.1.6431.1.12.1.1.1.1.9	Counter32	read-write	This counter is incremented whenever a message has been sent and processed for this host, interface and protocol.
C32 bwXspCommonCommInputMessagesProcessed	1.3.6.1.4.1.6431.1.12.1.1.1.1.10	Counter32	read-write	This counter is incremented whenever a message has been received and processed for this host, interface and protocol.
C32 bwXspCommonCommOutputCommunicationErrors	1.3.6.1.4.1.6431.1.12.1.1.1.1.11	Counter32	read-write	This counter is incremented whenever a message could not be read because the TCP stack returned an error.
C32 bwXspCommonCommInputCommunicationErrors	1.3.6.1.4.1.6431.1.12.1.1.1.1.12	Counter32	read-write	This counter is incremented whenever a message has been sent and processed for this host, interface and protocol.
auth	1.3.6.1.4.1.6431.1.12.1.2
C32 bwXspAuthenticationAttemptsEx	1.3.6.1.4.1.6431.1.12.1.2.1	Counter32	read-write	This counter is incremented when the XSP sends an authentication message to the Authentication Server, e.g. BroadWorks PS.
C32 bwXspAuthenticationFailed	1.3.6.1.4.1.6431.1.12.1.2.2	Counter32	read-write	This counter is incremented when the XSP receives an authentication failure response from the Authentication Server, e.g. BroadWorks PS.
oci	1.3.6.1.4.1.6431.1.12.1.3
C32 bwXspOCIRequests	1.3.6.1.4.1.6431.1.12.1.3.1	Counter32	read-write	The number of OCI request messages sent to the BroadWorks PS.
C32 bwXspOCIResponses	1.3.6.1.4.1.6431.1.12.1.3.2	Counter32	read-write	The number of request response to OCI messages received from the BroadWorks PS.
C32 bwXspOCIUnauthorizedMessage	1.3.6.1.4.1.6431.1.12.1.3.3	Counter32	read-write	The number of error response due to unauthorized session received from the BroadWorks PS.
C32 bwXspOCICRequests	1.3.6.1.4.1.6431.1.12.1.3.4	Counter32	read-write	The number of OCI-C request messages sent to the BroadWorks XS.
C32 bwXspOCICResponses	1.3.6.1.4.1.6431.1.12.1.3.5	Counter32	read-write	The number of request response to OCI-C messages received from the BroadWorks XS.
C32 bwXspOCICMessagesReceived	1.3.6.1.4.1.6431.1.12.1.3.6	Counter32	read-write	This counter is incremented when a message from an XS is received.
C32 bwXspOCICMessagesRejected	1.3.6.1.4.1.6431.1.12.1.3.7	Counter32	read-write	This counter is incremented when a message from an XS is rejected before it reaches the web application.
C32 bwXspOCICMessagesDelivered	1.3.6.1.4.1.6431.1.12.1.3.8	Counter32	read-write	This counter is incremented when a message from an XS is delivered to the web application.
C32 bwXspOCICMessagesReplied	1.3.6.1.4.1.6431.1.12.1.3.9	Counter32	read-write	This counter is incremented when a reply from an web application is delivered to the XS.
nsLocationAPI	1.3.6.1.4.1.6431.1.12.1.4
C32 bwXspNsLocAPIAttempts	1.3.6.1.4.1.6431.1.12.1.4.1	Counter32	read-write	This counter is incremented when the XSP sends a location API request to a Network Server.
C32 bwXspNsLocAPIResponseFailed	1.3.6.1.4.1.6431.1.12.1.4.2	Counter32	read-write	This counter is incremented when the XSP receives a failed location API response from the Network Server.
nsPortalAPI	1.3.6.1.4.1.6431.1.12.1.5
C32 bwXspNsASDiscoveryAttempts	1.3.6.1.4.1.6431.1.12.1.5.1	Counter32	read-write	This counter is incremented when the Xsp sends a PortalAPI request to a Network Server.
C32 bwXspNsASDiscoveryAttemptsFailed	1.3.6.1.4.1.6431.1.12.1.5.2	Counter32	read-write	This counter is incremented when the Xsp is unable to receive a successful PortalAPI request from the Network Server.
bwXspMibConformance	1.3.6.1.4.1.6431.1.12.1000
bwXspMibGroups	1.3.6.1.4.1.6431.1.12.1000.1
bwXspBcctGroup	1.3.6.1.4.1.6431.1.12.1000.1.1			This group defines the Xsp statistics for the BCCT protocol to the BroadWorks Application.
bwXspAuthGroup	1.3.6.1.4.1.6431.1.12.1000.1.2			This group defines the XSP statistics for the auth component.
bwXspOciGroup	1.3.6.1.4.1.6431.1.12.1000.1.3			This group defines the Xsp statistics for the OCI protocol to the BroadWorks Application.
bwXspNsLocAPIGroup	1.3.6.1.4.1.6431.1.12.1000.1.4			This group defines the Xsp statistics for the NS Location API protocol to the BroadWorks Network Server.
bwXspNsPortalAPIGroup	1.3.6.1.4.1.6431.1.12.1000.1.5			This group defines the Xsp statistics for the NS Portal API protocol to the BroadWorks Network Server.
bwXspMibCompliancy	1.3.6.1.4.1.6431.1.12.1000.2
bwXspBasicCompliance	1.3.6.1.4.1.6431.1.12.1000.2.1			BroadWorks Xtended Services Platform MIB compliance

RFC description

Cisco BroadWorks SNMP MIB capturing performance measurements for the Xtended Services Platform (XSP). Monitors BCCT (BroadWorks Cluster Control Transport) communication statistics and message processing metrics.

Start monitoring BroadSoft BroadWorks VoIP/UC application servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BW-BroadworksXtendedServicesPlatform