BLUESOCKET-MIB

All MIBs › BLUESOCKET-MIB

Category: Wireless and WLAN

Description: Manages BlueSocket wireless LAN controller configuration, AP associations, and user sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BLUESOCKET-MIB?

BLUESOCKET-MIB is a vendor-specific MIB for BlueSocket wireless LAN controllers, used to manage enterprise Wi-Fi deployments including access point associations and captive-portal user sessions. Based on its stated purpose it exposes configuration and status data for the controller itself, its associated access points, and authenticated wireless client/user sessions. It would be used to monitor the software/service status of the wireless infrastructure, such as AP association/connectivity state and active user session counts, revealing controller or AP capacity and health. No usable sample object names were extracted for this module (only placeholder entries), so specifics beyond the high-level description can't be grounded to real identifiers. It's typically deployed in enterprise and campus wireless networks using BlueSocket wireless LAN controllers for centralized Wi-Fi access and guest/user authentication. Engineers can download the BLUESOCKET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BLUESOCKET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BlueSocket wireless LAN controller
wireless access point managed by a BlueSocket controller

Monitoring Examples

No usable sample object or table names were extracted for this MIB (only placeholder entries were present), so a concrete polling example can't be grounded in real identifiers. In general, a wireless controller MIB of this kind would be polled for AP association state and active user session counts, which an operator would use to detect an access point going offline or a spike or drop in connected wireless clients.

What Can Be Monitored

access point association/connectivity state
active wireless user session count

Imported Objects

From BLUESOCKET-ROOT

blueSocket

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT adminUserAccess	1.3.6.1.4.1.9967.1.1.2.1.1.4	INTEGER	read-create	Admin user access level full - have all complete access intermediate - the adUsrAccessTable decides the access level of this admin user. readonly - Readonly access
STR adminUserEmailId	1.3.6.1.4.1.9967.1.1.2.1.1.5	DisplayString	read-create	The email address of the admin user
adminUserEntry	1.3.6.1.4.1.9967.1.1.2.1.1		not-accessible	An adminUser entry containing information about a particular adminUser.
I32 adminUserId	1.3.6.1.4.1.9967.1.1.2.1.1.1	Integer32	not-accessible	A unique value for each adminUser.
STR adminUserName	1.3.6.1.4.1.9967.1.1.2.1.1.3	DisplayString	read-create	A unique name for each admin user
STR adminUserNotes	1.3.6.1.4.1.9967.1.1.2.1.1.7	DisplayString	read-create	Admin user notes
STR adminUserPassword	1.3.6.1.4.1.9967.1.1.2.1.1.6	DisplayString	read-create	The adminUser password. Get and getnext request on this object returns encrypted password value
ROW adminUserRowStatus	1.3.6.1.4.1.9967.1.1.2.1.1.9	RowStatus	read-create	The Row status attribute for row handling
adminUsers	1.3.6.1.4.1.9967.1.1.2
INT adminUserStatus	1.3.6.1.4.1.9967.1.1.2.1.1.2	INTEGER	read-create	To Enable/disable an adminUser.
adminUserTable	1.3.6.1.4.1.9967.1.1.2.1		not-accessible	A list of adminUser entries.
INT adUsrAccessAccounting	1.3.6.1.4.1.9967.1.1.3.1.4	INTEGER	read-create	To grant/deny access to manage accounting server
INT adUsrAccessAdminUser	1.3.6.1.4.1.9967.1.1.3.1.1	INTEGER	read-create	To grant/deny access to manage administrator users.
INT adUsrAccessConfiguration	1.3.6.1.4.1.9967.1.1.3.1.9	INTEGER	read-create	To grant/deny access to manage Configuration.
INT adUsrAccessDestination	1.3.6.1.4.1.9967.1.1.3.1.6	INTEGER	read-create	To grant/deny access to manage Destinations.
adUsrAccessEntry	1.3.6.1.4.1.9967.1.1.3.1		not-accessible	Extended table from adminUserTable. The values from adminUserAccess column take higher precedence and this table entry will be considered only when the adminUserAccess column from adminUserTable has a value of 'intermediate'. This table is to configure the various level of administrator privilages. This is mainly for admin who try to manage WGs using Web interfaces. Every column in this table correspond to a tab name in web interface. So choosing enable/disable will grant/deny access to the administrator user for the corresponding tabs. Note: The administrator with the username as 'admin have all access and considered as the the super user for WGs
INT adUsrAccessExServer	1.3.6.1.4.1.9967.1.1.3.1.3	INTEGER	read-create	To grant/deny access to manage external servers.
INT adUsrAccessMacDev	1.3.6.1.4.1.9967.1.1.3.1.16	INTEGER	read-create	To grant/deny access to manage mac device external authentication servers
INT adUsrAccessMaintance	1.3.6.1.4.1.9967.1.1.3.1.12	INTEGER	read-create	To grant/deny access to manage administrator users
INT adUsrAccessNativeUser	1.3.6.1.4.1.9967.1.1.3.1.2	INTEGER	read-create	To grant/deny access to manage native/local users.
INT adUsrAccessNetwork	1.3.6.1.4.1.9967.1.1.3.1.10	INTEGER	read-create	To grant/deny access to manage Network.
INT adUsrAccessReplication	1.3.6.1.4.1.9967.1.1.3.1.11	INTEGER	read-create	To grant/deny access to manage replication.
INT adUsrAccessRoles	1.3.6.1.4.1.9967.1.1.3.1.5	INTEGER	read-create	To grant/deny access to manage roles.
INT adUsrAccessSchedules	1.3.6.1.4.1.9967.1.1.3.1.15	INTEGER	read-create	The Row status attribute for row handling
INT adUsrAccessServices	1.3.6.1.4.1.9967.1.1.3.1.7	INTEGER	read-create	To grant/deny access to manage Services.
INT adUsrAccessStatus	1.3.6.1.4.1.9967.1.1.3.1.13	INTEGER	read-create	To grant/deny access to manage status information
adUsrAccessTable	1.3.6.1.4.1.9967.1.1.3		not-accessible	A list of adUsrAccess entries.
INT adUsrAccessVlans	1.3.6.1.4.1.9967.1.1.3.1.14	INTEGER	read-create	To grant/deny access to manage vlans
INT adUsrAccessVpn	1.3.6.1.4.1.9967.1.1.3.1.8	INTEGER	read-create	To grant/deny access to manage Vpn.
I32 apCheckTime	1.3.6.1.4.1.9967.1.7.2.3	Integer32	read-write	Time in seconds between checking access point status
appLogLevEntry	1.3.6.1.4.1.9967.1.7.7.3.1		not-accessible	An application log level entry containing information about a particular active appLogLevel.
I32 appLogLevId	1.3.6.1.4.1.9967.1.7.7.3.1.1	Integer32	not-accessible	Index for this table
INT appLogLevLevel	1.3.6.1.4.1.9967.1.7.7.3.1.3	INTEGER	read-write
STR appLogLevName	1.3.6.1.4.1.9967.1.7.7.3.1.2	DisplayString	read-only	Name
appLogLevTable	1.3.6.1.4.1.9967.1.7.7.3		not-accessible	List of active appLogLevs
STR apSnmpCommunity	1.3.6.1.4.1.9967.1.7.2.5	DisplayString	read-write	Read only snmp community string for all Access point
authentication	1.3.6.1.4.1.9967.1.7.10
INT authenticationMethod	1.3.6.1.4.1.9967.1.6.1.2	INTEGER	read-write	IKE Settings Authentication Method.
INT authMethodCertificates	1.3.6.1.4.1.9967.1.6.1.12	INTEGER	read-write	authentication method - certificates
INT authMethodPreSharedKeys	1.3.6.1.4.1.9967.1.6.1.13	INTEGER	read-write	authentication method - pre-shared keys
autoBackup	1.3.6.1.4.1.9967.1.7.3
STR autoBkupFtpDestDir	1.3.6.1.4.1.9967.1.7.3.3	DisplayString	read-write	FTP Server hostname
STR autoBkupFtpServName	1.3.6.1.4.1.9967.1.7.3.2	DisplayString	read-write	FTP Server hostname
STR autoBkupFtpServPasswd	1.3.6.1.4.1.9967.1.7.3.5	DisplayString	read-write	FTP Server password
STR autoBkupFtpServUser	1.3.6.1.4.1.9967.1.7.3.4	DisplayString	read-write	FTP Server user name
OCT autoBkupRate	1.3.6.1.4.1.9967.1.7.3.1	OCTET STRING	read-write	Auto backup mode
blueEventEntry	1.3.6.1.4.1.9967.1.7.8.1.2.1		not-accessible	To enable/disable traps
blueEventTable	1.3.6.1.4.1.9967.1.7.8.1.2		not-accessible
blueServer	1.3.6.1.4.1.9967.1
INT btEventOptStatus	1.3.6.1.4.1.9967.1.7.8.1.2.1.3	INTEGER	read-write
I32 btId	1.3.6.1.4.1.9967.1.7.8.1.2.1.1	Integer32	not-accessible	Index
STR btName	1.3.6.1.4.1.9967.1.7.8.1.2.1.2	DisplayString	read-only	Trap name
OCT certContent	1.3.6.1.4.1.9967.1.6.4.1.1.9	OCTET STRING	read-create
STR certEndDate	1.3.6.1.4.1.9967.1.6.4.1.1.5	DisplayString	read-create
certEntry	1.3.6.1.4.1.9967.1.6.4.1.1		not-accessible	A certEntry containing information about certificates.
I32 certId	1.3.6.1.4.1.9967.1.6.4.1.1.1	Integer32	not-accessible	A unique id for each cert.
certificate	1.3.6.1.4.1.9967.1.6.4
STR certIssuer	1.3.6.1.4.1.9967.1.6.4.1.1.6	DisplayString	read-create
STR certName	1.3.6.1.4.1.9967.1.6.4.1.1.7	DisplayString	read-create
STR certOrg	1.3.6.1.4.1.9967.1.6.4.1.1.8	DisplayString	read-create
STR certPkey	1.3.6.1.4.1.9967.1.6.4.1.1.10	DisplayString	read-create
STR certPkeyAlgo	1.3.6.1.4.1.9967.1.6.4.1.1.11	DisplayString	read-create
I32 certPkeySize	1.3.6.1.4.1.9967.1.6.4.1.1.12	Integer32	read-create
ROW certRowStatus	1.3.6.1.4.1.9967.1.6.4.1.1.16	RowStatus	read-create
STR certSerial	1.3.6.1.4.1.9967.1.6.4.1.1.13	DisplayString	read-create
STR certSignAlgo	1.3.6.1.4.1.9967.1.6.4.1.1.14	DisplayString	read-create
STR certStartDate	1.3.6.1.4.1.9967.1.6.4.1.1.4	DisplayString	read-create
STR certSubject	1.3.6.1.4.1.9967.1.6.4.1.1.3	DisplayString	read-create
certTable	1.3.6.1.4.1.9967.1.6.4.1		not-accessible	A list of cert entries.
STR certType	1.3.6.1.4.1.9967.1.6.4.1.1.2	DisplayString	read-create	Certificate type
I32 certVersion	1.3.6.1.4.1.9967.1.6.4.1.1.15	Integer32	read-create
configuration	1.3.6.1.4.1.9967.1.7
confLog	1.3.6.1.4.1.9967.1.7.7
confLogGroup	1.3.6.1.4.1.9967.1.7.7.1
connection	1.3.6.1.4.1.9967.1.10
OCT connectionAP	1.3.6.1.4.1.9967.1.10.1.1.15	OCTET STRING	read-write
I32 connectionBytes	1.3.6.1.4.1.9967.1.10.1.1.9	Integer32	read-write
TIK connectionChecked	1.3.6.1.4.1.9967.1.10.1.1.8	TimeTicks	read-write
I32 connectionCheckTime	1.3.6.1.4.1.9967.1.7.2.2	Integer32	read-write	Time in seconds between checking connection status
I32 connectionCurRate	1.3.6.1.4.1.9967.1.10.1.1.10	Integer32	read-write
OCT connectionDev	1.3.6.1.4.1.9967.1.10.1.1.12	OCTET STRING	read-write
connectionEntry	1.3.6.1.4.1.9967.1.10.1.1		not-accessible	Entry containing information about a particular active connection.
I32 connectionExpiry	1.3.6.1.4.1.9967.1.10.1.1.11	Integer32	read-write
STR connectionHost	1.3.6.1.4.1.9967.1.10.1.1.13	DisplayString	read-write
I32 connectionId	1.3.6.1.4.1.9967.1.10.1.1.1	Integer32	not-accessible	Index for this table
ADR connectionIp	1.3.6.1.4.1.9967.1.10.1.1.3	BlueIpAddress	read-write	Ip address of the machine from where the connection is established
I32 connectionLoginAttempt	1.3.6.1.4.1.9967.1.10.1.1.16	Integer32	read-write
I32 connectionLoginAttemptCnt	1.3.6.1.4.1.9967.1.10.1.1.17	Integer32	read-write
DAT connectionLoginTime	1.3.6.1.4.1.9967.1.10.1.1.7	DateAndTime	read-write	User login time
OCT connectionMac	1.3.6.1.4.1.9967.1.10.1.1.4	OCTET STRING	read-write	The Mac address of the machine from where the connection is established
STR connectionName	1.3.6.1.4.1.9967.1.10.1.1.2	DisplayString	read-only	Connection name
OCT connectionRoamMac	1.3.6.1.4.1.9967.1.10.1.1.18	OCTET STRING	read-write	The Mac address of the roaming machine
I32 connectionRoleId	1.3.6.1.4.1.9967.1.10.1.1.5	Integer32	read-write	The role id associated with this connection
connectionTable	1.3.6.1.4.1.9967.1.10.1		not-accessible	List of active connections
I32 connectionUnReg	1.3.6.1.4.1.9967.1.10.1.1.14	Integer32	read-write
I32 connectionUserId	1.3.6.1.4.1.9967.1.10.1.1.6	Integer32	read-write	User id associated with this connection
destination	1.3.6.1.4.1.9967.1.3
STR ex802AuthServAddr	1.3.6.1.4.1.9967.1.7.10.1.7.1.4	DisplayString	read-create	802_1x server Ip address or DNS name
I32 ex802AuthServDefaultRole	1.3.6.1.4.1.9967.1.7.10.1.7.1.6	Integer32	read-create	Default role Id
ex802AuthServEntry	1.3.6.1.4.1.9967.1.7.10.1.7.1		not-accessible
I32 ex802AuthServId	1.3.6.1.4.1.9967.1.7.10.1.7.1.1	Integer32	not-accessible	Unique Id for each entry in this table
STR ex802AuthServName	1.3.6.1.4.1.9967.1.7.10.1.7.1.3	DisplayString	read-create	A unique external server name
STR ex802AuthServNotes	1.3.6.1.4.1.9967.1.7.10.1.7.1.7	DisplayString	read-create	Notes
I32 ex802AuthServPort	1.3.6.1.4.1.9967.1.7.10.1.7.1.5	Integer32	read-create	802_1x server port number
ROW ex802AuthServRowStatus	1.3.6.1.4.1.9967.1.7.10.1.7.1.8	RowStatus	read-create	The Row status attribute for row handling
INT ex802AuthServState	1.3.6.1.4.1.9967.1.7.10.1.7.1.2	INTEGER	read-create	To Enable/Disable an external server
ex802AuthServTable	1.3.6.1.4.1.9967.1.7.10.1.7		not-accessible	A table to hold information about external 802_1x auth server.
exAuthServer	1.3.6.1.4.1.9967.1.7.10.1
INT exchangeMode	1.3.6.1.4.1.9967.1.6.1.1	INTEGER	read-write	IKE Settings Exchange mode.
STR exLdapServAccount	1.3.6.1.4.1.9967.1.7.10.1.3.1.11	DisplayString	read-create
STR exLdapServAddr	1.3.6.1.4.1.9967.1.7.10.1.3.1.7	DisplayString	read-create	LDAP server Ip address or DNS name
STR exLdapServBase	1.3.6.1.4.1.9967.1.7.10.1.3.1.9	DisplayString	read-create	LDAP server Base entry. An example base entry is dc=example, dc=com
I32 exLdapServDefRoleId	1.3.6.1.4.1.9967.1.7.10.1.3.1.4	Integer32	read-create	Default role for external server users
exLdapServEntry	1.3.6.1.4.1.9967.1.7.10.1.3.1		not-accessible
STR exLdapServFilters	1.3.6.1.4.1.9967.1.7.10.1.3.1.12	DisplayString	read-create	Additional LDAP filters used when looking up Unique ID attribute. An example is objectClass=Person
I32 exLdapServId	1.3.6.1.4.1.9967.1.7.10.1.3.1.1	Integer32	not-accessible	Unique Id for each entry in this table
STR exLdapServName	1.3.6.1.4.1.9967.1.7.10.1.3.1.3	DisplayString	read-create	A unique external server name
STR exLdapServNotes	1.3.6.1.4.1.9967.1.7.10.1.3.1.15	DisplayString	read-create	Notes
I32 exLdapServPort	1.3.6.1.4.1.9967.1.7.10.1.3.1.8	Integer32	read-create	LDAP server port number
I32 exLdapServPrecedence	1.3.6.1.4.1.9967.1.7.10.1.3.1.14	Integer32	read-create	The precedence this server has for verifying username/passwords
I32 exLdapServRdAccId	1.3.6.1.4.1.9967.1.7.10.1.3.1.6	Integer32	read-create	For accounting logging with authentication
INT exLdapServRdAccState	1.3.6.1.4.1.9967.1.7.10.1.3.1.5	INTEGER	read-create
ROW exLdapServRowStatus	1.3.6.1.4.1.9967.1.7.10.1.3.1.20	RowStatus	read-create	The Row status attribute for row handling
STR exLdapServSecret	1.3.6.1.4.1.9967.1.7.10.1.3.1.13	DisplayString	read-create	LDAP external server secret base entry
OCT exLdapServSsl	1.3.6.1.4.1.9967.1.7.10.1.3.1.17	OCTET STRING	read-create
I32 exLdapServSslClient	1.3.6.1.4.1.9967.1.7.10.1.3.1.19	Integer32	read-create
I32 exLdapServSslServer	1.3.6.1.4.1.9967.1.7.10.1.3.1.18	Integer32	read-create
INT exLdapServState	1.3.6.1.4.1.9967.1.7.10.1.3.1.2	INTEGER	read-create	To Enable/Disable an external Ldap authentication server
exLdapServTable	1.3.6.1.4.1.9967.1.7.10.1.3		not-accessible	list of LDAP external servers.
STR exLdapServUniqueId	1.3.6.1.4.1.9967.1.7.10.1.3.1.10	DisplayString	read-create	LDAP server Unique Id. An example Unique ID attribute is uid.
INT exModeAggressive	1.3.6.1.4.1.9967.1.6.1.10	INTEGER	read-write	IKE Settings : Exchange mode - main
INT exModeMain	1.3.6.1.4.1.9967.1.6.1.11	INTEGER	read-write	IKE Settings : Exchange mode - Aggressive
I32 exNtlmServDefRoleId	1.3.6.1.4.1.9967.1.7.10.1.4.1.6	Integer32	read-create	Default role Id for external server users. Should be an existing exRdAccServId from exRdAccServTable
STR exNtlmServDomainName	1.3.6.1.4.1.9967.1.7.10.1.4.1.7	DisplayString	read-create	Optional NT Domain Name to match
exNtlmServEntry	1.3.6.1.4.1.9967.1.7.10.1.4.1		not-accessible
I32 exNtlmServId	1.3.6.1.4.1.9967.1.7.10.1.4.1.1	Integer32	not-accessible	Unique Id for each entry in this table
I32 exNtlmServMsad	1.3.6.1.4.1.9967.1.7.10.1.4.1.10	Integer32	read-create
STR exNtlmServMsdc	1.3.6.1.4.1.9967.1.7.10.1.4.1.8	DisplayString	read-create	List of IP addresses of domain controllers
STR exNtlmServMsrpc	1.3.6.1.4.1.9967.1.7.10.1.4.1.9	DisplayString	read-create	List of port range for MSRPC separated by comma
STR exNtlmServName	1.3.6.1.4.1.9967.1.7.10.1.4.1.3	DisplayString	read-create	A unique external server name
STR exNtlmServNotes	1.3.6.1.4.1.9967.1.7.10.1.4.1.11	DisplayString	read-create	Notes
I32 exNtlmServRdAccId	1.3.6.1.4.1.9967.1.7.10.1.4.1.5	Integer32	read-create	For accounting logging with authentication
INT exNtlmServRdAccState	1.3.6.1.4.1.9967.1.7.10.1.4.1.4	INTEGER	read-create
ROW exNtlmServRowStatus	1.3.6.1.4.1.9967.1.7.10.1.4.1.12	RowStatus	read-create	The Row status attribute for row handling
INT exNtlmServState	1.3.6.1.4.1.9967.1.7.10.1.4.1.2	INTEGER	read-create	To Enable/Disable an external NTLM server
exNtlmServTable	1.3.6.1.4.1.9967.1.7.10.1.4		not-accessible	A list of NTLM external authentication server entries.
STR exRdAccServAddr	1.3.6.1.4.1.9967.1.7.10.1.6.1.4	DisplayString	read-create	RADIUS accounting server Ip address or DNS name
exRdAccServEntry	1.3.6.1.4.1.9967.1.7.10.1.6.1		not-accessible
I32 exRdAccServId	1.3.6.1.4.1.9967.1.7.10.1.6.1.1	Integer32	not-accessible	Unique Id for each entry in this table
STR exRdAccServName	1.3.6.1.4.1.9967.1.7.10.1.6.1.3	DisplayString	read-create	A unique external radius accounting server name
STR exRdAccServNotes	1.3.6.1.4.1.9967.1.7.10.1.6.1.7	DisplayString	read-create	Notes
I32 exRdAccServPort	1.3.6.1.4.1.9967.1.7.10.1.6.1.5	Integer32	read-create	RADIUS server port number
ROW exRdAccServRowStatus	1.3.6.1.4.1.9967.1.7.10.1.6.1.8	RowStatus	read-create	The Row status attribute for row handling
STR exRdAccServSecret	1.3.6.1.4.1.9967.1.7.10.1.6.1.6	DisplayString	read-create	Shared secret
INT exRdAccServState	1.3.6.1.4.1.9967.1.7.10.1.6.1.2	INTEGER	read-create	To Enable/Disable this external radius accounting server
exRdAccServTable	1.3.6.1.4.1.9967.1.7.10.1.6		not-accessible	A table to hold information about external Raduis Accounting server.
STR exRdAuthServAddr	1.3.6.1.4.1.9967.1.7.10.1.2.1.7	DisplayString	read-create	Radius server Ip address or DNS name
I32 exRdAuthServDefRoleId	1.3.6.1.4.1.9967.1.7.10.1.2.1.4	Integer32	read-create	Default role Id for external server users. Should be an existing roleId from roleTable
exRdAuthServEntry	1.3.6.1.4.1.9967.1.7.10.1.2.1		not-accessible
I32 exRdAuthServId	1.3.6.1.4.1.9967.1.7.10.1.2.1.1	Integer32	not-accessible	Unique Id for each entry in this table
STR exRdAuthServName	1.3.6.1.4.1.9967.1.7.10.1.2.1.3	DisplayString	read-create	A unique external radius server name.
STR exRdAuthServNotes	1.3.6.1.4.1.9967.1.7.10.1.2.1.11	DisplayString	read-create	Notes
I32 exRdAuthServPort	1.3.6.1.4.1.9967.1.7.10.1.2.1.8	Integer32	read-create	Radius server port number
I32 exRdAuthServPrecedence	1.3.6.1.4.1.9967.1.7.10.1.2.1.10	Integer32	read-create	The server's precedence for verifying username/passwords
I32 exRdAuthServRdAccId	1.3.6.1.4.1.9967.1.7.10.1.2.1.6	Integer32	read-create	For accounting logging with authentication. Should be an existing exRdAccServId from exRdAccServTable
ROW exRdAuthServRowStatus	1.3.6.1.4.1.9967.1.7.10.1.2.1.12	RowStatus	read-create	The Row status attribute for row handling
STR exRdAuthServSecret	1.3.6.1.4.1.9967.1.7.10.1.2.1.9	DisplayString	read-create	Shared secret
INT exRdAuthServState	1.3.6.1.4.1.9967.1.7.10.1.2.1.2	INTEGER	read-create	To Enable/Disable an external radius server
exRdAuthServTable	1.3.6.1.4.1.9967.1.7.10.1.2		not-accessible	A table to hold information about external Raduis server.
I32 exServId	1.3.6.1.4.1.9967.1.7.10.1.5.1.1	Integer32	not-accessible	First index of this table. This index value should match any of external authentication servers table index. Eg: Radius or ldap or ntlm or 802_1x authentication servers
OCT exUserRuleAttribute	1.3.6.1.4.1.9967.1.7.10.1.5.1.3	OCTET STRING	read-create	The name of attributes that are be used for authentication
exUserRuleEntry	1.3.6.1.4.1.9967.1.7.10.1.5.1		not-accessible
I32 exUserRuleId	1.3.6.1.4.1.9967.1.7.10.1.5.1.2	Integer32	not-accessible	index
OCT exUserRuleOperator	1.3.6.1.4.1.9967.1.7.10.1.5.1.4	OCTET STRING	read-create	The logical operator that works along with the exUserRuleAttribute columnar attribute
I32 exUserRuleRoleId	1.3.6.1.4.1.9967.1.7.10.1.5.1.6	Integer32	read-create	The role id to be assigned for the given user if the rule matches
ROW exUserRuleRowStatus	1.3.6.1.4.1.9967.1.7.10.1.5.1.8	RowStatus	read-create	The Row status attribute for row handling
I32 exUserRuleSeqId	1.3.6.1.4.1.9967.1.7.10.1.5.1.7	Integer32	read-create	The sequence to be followed when the rules are checked for user authentication
exUserRuleTable	1.3.6.1.4.1.9967.1.7.10.1.5		not-accessible	When a user successfully authenticates against the external server the following rules are checked in numerical order. If a rule matches then the user is assigned the role, and no further rule is checked. If no rules match, the user is assigned the default role
OCT exUserRuleValue	1.3.6.1.4.1.9967.1.7.10.1.5.1.5	OCTET STRING	read-create	The attribute value
failover	1.3.6.1.4.1.9967.1.8.3
ADR fixedIpAddrAddress	1.3.6.1.4.1.9967.1.8.4.2.1.3	BlueIpAddress	read-create
fixedIpAddrEntry	1.3.6.1.4.1.9967.1.8.4.2.1		not-accessible	An fixed ip address entry mapping between the hardware address and the ip address and their default role id
ADR fixedIpAddrHost	1.3.6.1.4.1.9967.1.8.4.2.1.4	BlueIpAddress	read-create
I32 fixedIpAddrId	1.3.6.1.4.1.9967.1.8.4.2.1.1	Integer32	not-accessible
OCT fixedIpAddrMac	1.3.6.1.4.1.9967.1.8.4.2.1.2	OCTET STRING	read-create
I32 fixedIpAddrRoleId	1.3.6.1.4.1.9967.1.8.4.2.1.5	Integer32	read-create
ROW fixedIpAddrRowStatus	1.3.6.1.4.1.9967.1.8.4.2.1.6	RowStatus	read-create	The Row status attribute for row handling
fixedIpAddrTable	1.3.6.1.4.1.9967.1.8.4.2		not-accessible
INT genSnapshot	1.3.6.1.4.1.9967.1.9.2	INTEGER	read-write
I32 heartBeatInterval	1.3.6.1.4.1.9967.1.8.3.1	Integer32	read-write	the time in seconds between heartbeats
ADR hostAddress	1.3.6.1.4.1.9967.1.3.1.1.3	BlueIpAddress	read-create	IP or FQDN (Fully Qualified Domain Name)
hostEntry	1.3.6.1.4.1.9967.1.3.1.1		not-accessible
hostGrpEntry	1.3.6.1.4.1.9967.1.3.2.1		not-accessible
I32 hostGrpId	1.3.6.1.4.1.9967.1.3.2.1.1	Integer32	not-accessible	Table index.
hostGrpMemEntry	1.3.6.1.4.1.9967.1.3.3.1		not-accessible
I32 hostGrpMemId	1.3.6.1.4.1.9967.1.3.3.1.1	Integer32	not-accessible	Second index of the Table
ROW hostGrpMemRowStatus	1.3.6.1.4.1.9967.1.3.3.1.2	RowStatus	read-create	The Row status attribute for row handling
hostGrpMemTable	1.3.6.1.4.1.9967.1.3.3		not-accessible	To define the destinations group members.
OCT hostGrpName	1.3.6.1.4.1.9967.1.3.2.1.2	OCTET STRING	read-create	Unique name for every host Grp
ROW hostGrpRowStatus	1.3.6.1.4.1.9967.1.3.2.1.3	RowStatus	read-create	The Row status attribute for row handling
hostGrpTable	1.3.6.1.4.1.9967.1.3.2		not-accessible	To define the destination Group.
I32 hostId	1.3.6.1.4.1.9967.1.3.1.1.1	Integer32	not-accessible	Table index
OCT hostInvertDest	1.3.6.1.4.1.9967.1.3.1.1.5	OCTET STRING	read-create	'N' Invert option is not selected (No) 'Y' Invert option is selected (Yes)
OCT hostName	1.3.6.1.4.1.9967.1.3.1.1.2	OCTET STRING	read-create	Unique name for every host or network
ADR hostNetmask	1.3.6.1.4.1.9967.1.3.1.1.4	BlueIpAddress	read-create	Netmask for network entries. To be set to 255.255.255.255 if hostType is set to 'H'
STR hostNotes	1.3.6.1.4.1.9967.1.3.1.1.7	DisplayString	read-create	Notes
ROW hostRowStatus	1.3.6.1.4.1.9967.1.3.1.1.8	RowStatus	read-create	The Row status attribute for row handling
hostTable	1.3.6.1.4.1.9967.1.3.1		not-accessible	To define the destinations that wireless users can potentially access. Adestination can be a single device within a netwokr and/or all the devices reachable within address space
OCT hostType	1.3.6.1.4.1.9967.1.3.1.1.6	OCTET STRING	read-create	The entry can be either a end host or a sub network. In case of host, the hostNetmask column is set to a default value of 255.255.255.255 'H' - Host 'N' - Network
http	1.3.6.1.4.1.9967.1.7.1
STR httpAdminACL	1.3.6.1.4.1.9967.1.7.1.14	DisplayString	read-write	Admin access control list. Comma seperated list of IP addresses to allow adminstrative access
I32 httpAttemptWait	1.3.6.1.4.1.9967.1.7.1.12	Integer32	read-write	Number of minutes to wait after the maximum number of login attempts is made.
I32 httpAutoPause	1.3.6.1.4.1.9967.1.7.1.4	Integer32	read-write	Pause in seconds before redirecting user login
INT httpAutoRedirectStatus	1.3.6.1.4.1.9967.1.7.1.3	INTEGER	read-write	If enabled, users will be redirected to the default URL, not their original destination.
INT httpChainCertChangeChoice	1.3.6.1.4.1.9967.1.7.1.17	INTEGER	read-write	Adjust if your custom SSL is a chain certificate Hint: disable if you do not require a chain certificate
OCT httpDefaultUrl	1.3.6.1.4.1.9967.1.7.1.5	OCTET STRING	read-write	Default Url
INT httpExServerChoice	1.3.6.1.4.1.9967.1.7.1.8	INTEGER	read-write	External server choice
INT httpLangChangeChoice	1.3.6.1.4.1.9967.1.7.1.10	INTEGER	read-write	Language change choice enabled/disable. Language change choice are only available for local users.
I32 httpLoginAttempts	1.3.6.1.4.1.9967.1.7.1.16	Integer32	read-write	Number of login attempts
INT httpLoginHelpButton	1.3.6.1.4.1.9967.1.7.1.11	INTEGER	read-write	Custom HTML popups can be created in the customized login section.
INT httpLogoutPopup	1.3.6.1.4.1.9967.1.7.1.6	INTEGER	read-write	Logout popup enable/disable
I32 httpMaxNumOfActiveSess	1.3.6.1.4.1.9967.1.7.1.13	Integer32	read-write	Number of active sessions per username/authentication type. '0' is unlimited.
INT httpPasswdChangeChoice	1.3.6.1.4.1.9967.1.7.1.9	INTEGER	read-write	Password change choice enable/disable. Password change choice are only available for local users.
STR httpPort	1.3.6.1.4.1.9967.1.7.1.1	DisplayString	read-write	Comma seperated list of Http/Proxy Ports to Monitor. Web requests on these ports will be redirected to the login
I32 httpRedirect	1.3.6.1.4.1.9967.1.7.1.2	Integer32	read-write	Port of http redirection for user login Adjust if 8080 is in use on your network.
INT httpRedirectToHostName	1.3.6.1.4.1.9967.1.7.1.15	INTEGER	read-write	Redirect to hostname. Will cause unregistered users to be redirected to hostname, not the Ip address
STR httpRootCaUrl	1.3.6.1.4.1.9967.1.7.1.7	DisplayString	read-write	Adjust if you custom SSL is a chain certificate.
I32 idleTimeout	1.3.6.1.4.1.9967.1.6.1.3	Integer32	read-write	IKE Settings idle timeout in seconds
interface	1.3.6.1.4.1.9967.1.8
ipsec	1.3.6.1.4.1.9967.1.6.1
INT ipsecConfCompressionDeflate	1.3.6.1.4.1.9967.1.6.1.14.1.19	INTEGER	read-create	compression: Delfate
INT ipsecConfCompressionLZS	1.3.6.1.4.1.9967.1.6.1.14.1.20	INTEGER	read-create	Compression: LZS
INT ipsecConfDiffieHellmanGrp1	1.3.6.1.4.1.9967.1.6.1.14.1.15	INTEGER	read-create	IKE Encryption: Diffie-Hellman Group 1
INT ipsecConfDiffieHellmanGrp2	1.3.6.1.4.1.9967.1.6.1.14.1.16	INTEGER	read-create	IKE Encryption: Diffie-Hellman Group 2
INT ipsecConfDiffieHellmanGrp5	1.3.6.1.4.1.9967.1.6.1.14.1.17	INTEGER	read-create	IKE Encryption: Diffie-Hellman Group 5
INT ipsecConfEnableConfiguration	1.3.6.1.4.1.9967.1.6.1.14.1.2	INTEGER	read-create	Local authentication: User Name and password/Pre-shared Key
ipsecConfEntry	1.3.6.1.4.1.9967.1.6.1.14.1		not-accessible	ipsec configuration
INT ipsecConfEsp128BitAESWithMD5	1.3.6.1.4.1.9967.1.6.1.14.1.9	INTEGER	read-create	Encryption: ESP - 128-bit AES with MD5 Integrity
INT ipsecConfEsp128BitAESWithSHA1	1.3.6.1.4.1.9967.1.6.1.14.1.10	INTEGER	read-create	Encryption: ESP - 128-bit AES with SHA1 Integrity
INT ipsecConfEsp192BitAESWithMD5	1.3.6.1.4.1.9967.1.6.1.14.1.11	INTEGER	read-create	Encryption: ESP - 192-bit AES with MD5 Integrity
INT ipsecConfEsp192BitAESWithSHA1	1.3.6.1.4.1.9967.1.6.1.14.1.12	INTEGER	read-create	Encryption: ESP - 192-bit AES with SHA1 Integrity
INT ipsecConfEsp256BitAESWithMD5	1.3.6.1.4.1.9967.1.6.1.14.1.13	INTEGER	read-create	Encryption: ESP - 256-bit AES with MD5 Integrity
INT ipsecConfEsp256BitAESWithSHA1	1.3.6.1.4.1.9967.1.6.1.14.1.14	INTEGER	read-create	Encryption: ESP - 256-bit AES with MD5 Integrity
INT ipsecConfEsp56BitDESWithMD5	1.3.6.1.4.1.9967.1.6.1.14.1.7	INTEGER	read-create	Encryption: ESP - 56 Bit DES with MD5 Integrity
INT ipsecConfEsp56BitDESWithSHA1	1.3.6.1.4.1.9967.1.6.1.14.1.8	INTEGER	read-create	Encryption: ESP - 56-bit DES with SHA1 Integrity
INT ipsecConfEspTripleDESWithMD5	1.3.6.1.4.1.9967.1.6.1.14.1.6	INTEGER	read-create	Encryption: ESP - Triple DES with MD5 Integrity
INT ipsecConfEspTripleDESWithSHA1	1.3.6.1.4.1.9967.1.6.1.14.1.5	INTEGER	read-create	Encryption: ESP - Triple DES with SHA1 Integrity
I32 ipsecConfId	1.3.6.1.4.1.9967.1.6.1.14.1.1	Integer32	not-accessible
INT ipsecConfLocalAuth	1.3.6.1.4.1.9967.1.6.1.14.1.4	INTEGER	read-create	Local authentication: User Name and password/Pre-shared Key
STR ipsecConfName	1.3.6.1.4.1.9967.1.6.1.14.1.3	DisplayString	read-create
INT ipsecConfPsfMode	1.3.6.1.4.1.9967.1.6.1.14.1.18	INTEGER	read-create	Perfect Forward Secrecy Mode
ROW ipsecConfRowStatus	1.3.6.1.4.1.9967.1.6.1.14.1.21	RowStatus	read-create	The Row status attribute for row handling
ipsecConfTable	1.3.6.1.4.1.9967.1.6.1.14		not-accessible	A list of ipsec configuration entries.
l2tp	1.3.6.1.4.1.9967.1.6.5
INT l2tpEnable	1.3.6.1.4.1.9967.1.6.5.1	INTEGER	read-write
I32 l2tpIdleTimeout	1.3.6.1.4.1.9967.1.6.5.5	Integer32	read-write	idle timeout
STR l2tpLdapPwdAttrName	1.3.6.1.4.1.9967.1.6.5.6	DisplayString	read-write	For LDAP Authentication, the attribute name for the encrypted ntPassword.
ADR l2tpLocalIpAddr	1.3.6.1.4.1.9967.1.6.5.4	BlueIpAddress	read-write
ADR l2tpRemoteIpEndAddr	1.3.6.1.4.1.9967.1.6.5.3	BlueIpAddress	read-write	Last remote ip address of the tunnel
ADR l2tpRemoteIpStartAddr	1.3.6.1.4.1.9967.1.6.5.2	BlueIpAddress	read-write	First remote ip address of the tunnel
I32 l2tpRoleId	1.3.6.1.4.1.9967.1.6.5.7	Integer32	read-write	For automatic role assignment of l2tp clients. The role Id represent row id from Role table
I32 logMaxLogEntries	1.3.6.1.4.1.9967.1.7.7.1.1	Integer32	read-write	Maximum number of log entries to keep
INT logMaxRemSysLogLevel	1.3.6.1.4.1.9967.1.7.7.1.6	INTEGER	read-write	Maximum log level to send to remote syslog server
I32 logNoOfDelLogEntries	1.3.6.1.4.1.9967.1.7.7.1.2	Integer32	read-write	Number of log entries to delete when reaching maximum
INT logStorage	1.3.6.1.4.1.9967.1.7.7.1.3	INTEGER	read-write	Log storage
I32 macDevAuthDefaultRole	1.3.6.1.4.1.9967.1.7.10.2.1.5	Integer32	read-create	Default role Id
macDevAuthEntry	1.3.6.1.4.1.9967.1.7.10.2.1		not-accessible
I32 macDevAuthId	1.3.6.1.4.1.9967.1.7.10.2.1.1	Integer32	not-accessible	Unique Id for each entry in this table
STR macDevAuthMac	1.3.6.1.4.1.9967.1.7.10.2.1.4	DisplayString	read-create	Mac address of the host machine to be authenticated
STR macDevAuthName	1.3.6.1.4.1.9967.1.7.10.2.1.3	DisplayString	read-create	A unique name
STR macDevAuthNotes	1.3.6.1.4.1.9967.1.7.10.2.1.6	DisplayString	read-create	Notes
ROW macDevAuthRowStatus	1.3.6.1.4.1.9967.1.7.10.2.1.7	RowStatus	read-create	The Row status attribute for row handling
INT macDevAuthState	1.3.6.1.4.1.9967.1.7.10.2.1.2	INTEGER	read-create	To Enable/Disable an external mac device auth server
macDevAuthTable	1.3.6.1.4.1.9967.1.7.10.2		not-accessible	A table to hold information about external mac device auth server.
INT machineRole	1.3.6.1.4.1.9967.1.9.1	INTEGER	read-write
managed	1.3.6.1.4.1.9967.1.8.4
I32 maxLifeTimeInKbs	1.3.6.1.4.1.9967.1.6.1.5	Integer32	read-write	IKE Settings maximun time out in Kilogytes
I32 maxLifeTimeInSecs	1.3.6.1.4.1.9967.1.6.1.4	Integer32	read-write	IKE Settings maximun time out in seconds
I32 minLifeTimeInKbs	1.3.6.1.4.1.9967.1.6.1.9	Integer32	read-write	IKE Settings maximun time out in seconds
I32 minLifeTimeInSecs	1.3.6.1.4.1.9967.1.6.1.8	Integer32	read-write	IKE Settings maximun time out in seconds
I32 mIntDefaultLease	1.3.6.1.4.1.9967.1.8.4.1.1.13	Integer32	read-create	Default lease time in seconds
ADR mIntDhcpEndIpAddr	1.3.6.1.4.1.9967.1.8.4.1.1.10	BlueIpAddress	read-create	DHCP end IP address
INT mIntDhcpServerOpt	1.3.6.1.4.1.9967.1.8.4.1.1.6	INTEGER	read-create	Start/stop DHCP server
ADR mIntDhcpStartIpAddr	1.3.6.1.4.1.9967.1.8.4.1.1.9	BlueIpAddress	read-write	DHCP start ip address
OCT mIntDnsDomainName	1.3.6.1.4.1.9967.1.8.4.1.1.12	OCTET STRING	read-create	DNS domain name
INT mIntDynamicDNS	1.3.6.1.4.1.9967.1.8.4.1.1.15	INTEGER	read-create	Dynamic DNS update scheme
INT mIntEnableDhcpRelay	1.3.6.1.4.1.9967.1.8.4.1.1.3	INTEGER	read-create	enable or disable dhcp relay. Setting it to true enables it and setting it to value 0 disables it
mIntEntry	1.3.6.1.4.1.9967.1.8.4.1.1		not-accessible	A entry containing information about a particular managed interface
I32 mIntId	1.3.6.1.4.1.9967.1.8.4.1.1.1	Integer32	not-accessible	A unique id for each managed interface
ADR mIntIpAddress	1.3.6.1.4.1.9967.1.8.4.1.1.4	BlueIpAddress	read-create	Ipaddress of the managed interface
I32 mIntMaximumLease	1.3.6.1.4.1.9967.1.8.4.1.1.14	Integer32	read-create	Maximum lease time in seconds
INT mIntMulticastOpt	1.3.6.1.4.1.9967.1.8.4.1.1.8	INTEGER	read-create	Enable/disable multicast
STR mIntName	1.3.6.1.4.1.9967.1.8.4.1.1.2	DisplayString	read-create	Managed interface name
INT mIntNatAddresses	1.3.6.1.4.1.9967.1.8.4.1.1.7	INTEGER	read-create	NAT the addresses in the protected interface address
ADR mIntNetbiosNameServ	1.3.6.1.4.1.9967.1.8.4.1.1.11	BlueIpAddress	read-create	Netbios name server
ADR mIntNetmask	1.3.6.1.4.1.9967.1.8.4.1.1.5	BlueIpAddress	read-create	Netmask
INT mIntProxyArpStatus	1.3.6.1.4.1.9967.1.8.4.1.1.18	INTEGER	read-create
ROW mIntRowStatus	1.3.6.1.4.1.9967.1.8.4.1.1.19	RowStatus	read-create	The Row status attribute for row handling
mIntTable	1.3.6.1.4.1.9967.1.8.4.1		not-accessible	A list of mInt entries.
I32 mIntVlanId	1.3.6.1.4.1.9967.1.8.4.1.1.16	Integer32	read-write
I32 mIntVlanInterface	1.3.6.1.4.1.9967.1.8.4.1.1.17	Integer32	read-create	VLAN id
misc	1.3.6.1.4.1.9967.1.7.2
mobility	1.3.6.1.4.1.9967.1.7.5
STR mobilityMeshKey	1.3.6.1.4.1.9967.1.7.5.2	DisplayString	read-write	Community mesh key
INT mobilityMode	1.3.6.1.4.1.9967.1.7.5.1	INTEGER	read-write	enable/disable mobility between blue servers
natEntry	1.3.6.1.4.1.9967.1.8.4.3.1		not-accessible
I32 natId	1.3.6.1.4.1.9967.1.8.4.3.1.1	Integer32	not-accessible
INT nativeUserAccess	1.3.6.1.4.1.9967.1.1.1.1.1.2	INTEGER	read-create	To Enable/disable an nativeUser.
STR nativeUserEmailId	1.3.6.1.4.1.9967.1.1.1.1.1.5	DisplayString	read-create	The Email address of the nativeUser
nativeUserEntry	1.3.6.1.4.1.9967.1.1.1.1.1		not-accessible	A nativeUser entry containing information about a particular nativeUser.
ADR nativeUserFixedIpAddr	1.3.6.1.4.1.9967.1.1.1.1.1.6	BlueIpAddress	read-create	Required for users connecting using the Windows 2000 IPSec client
I32 nativeUserId	1.3.6.1.4.1.9967.1.1.1.1.1.1	Integer32	not-accessible	A unique id for each nativeUser.
STR nativeUserName	1.3.6.1.4.1.9967.1.1.1.1.1.3	DisplayString	read-create	A unique Name for each nativeUser
STR nativeUserNotes	1.3.6.1.4.1.9967.1.1.1.1.1.8	DisplayString	read-create	Notes
STR nativeUserPassword	1.3.6.1.4.1.9967.1.1.1.1.1.7	DisplayString	read-create	The nativeUser password
I32 nativeUserRadAcctServId	1.3.6.1.4.1.9967.1.1.1.1.1.10	Integer32	read-create	The row id from exRadAcctServTable for the selected radius accounting server.
I32 nativeUserRoleId	1.3.6.1.4.1.9967.1.1.1.1.1.4	Integer32	read-create	The role Id associated with this nativeUser
ROW nativeUserRowStatus	1.3.6.1.4.1.9967.1.1.1.1.1.9	RowStatus	read-create	The Row status attribute for row handling
nativeUsers	1.3.6.1.4.1.9967.1.1.1
nativeUserTable	1.3.6.1.4.1.9967.1.1.1.1		not-accessible	A list of nativeUser entries.
ADR natManagedIp	1.3.6.1.4.1.9967.1.8.4.3.1.3	BlueIpAddress	read-create	Managed side IP address
ADR natProtectedIp	1.3.6.1.4.1.9967.1.8.4.3.1.2	BlueIpAddress	read-create	Protected side IP address
ROW natRowStatus	1.3.6.1.4.1.9967.1.8.4.3.1.4	RowStatus	read-create	The Row status attribute for row handling
natTable	1.3.6.1.4.1.9967.1.8.4.3		not-accessible
I32 noOfFailedBeats	1.3.6.1.4.1.9967.1.8.3.2	Integer32	read-write	Number of failed beats before fail-over
INT paFixedIpClientAccess	1.3.6.1.4.1.9967.1.7.6.1	INTEGER	read-write	Allow any client fixed ip settings
STR paSMTPServerIp	1.3.6.1.4.1.9967.1.7.6.2	DisplayString	read-write	Ip or name of mail server for SMTP port redirection.
OCT pIntDefaultDomain	1.3.6.1.4.1.9967.1.8.5.1.1.10	OCTET STRING	read-create	Default Domain
I32 pIntDhcpTimeout	1.3.6.1.4.1.9967.1.8.5.1.1.4	Integer32	read-create	Timeout in seconds for DHCP request
INT pIntEnableMulticast	1.3.6.1.4.1.9967.1.8.5.1.1.12	INTEGER	read-create	enable mulitcast for this interface
pIntEntry	1.3.6.1.4.1.9967.1.8.5.1.1		not-accessible	A pInt entry containing information about a particular protected interface
ADR pIntGateway	1.3.6.1.4.1.9967.1.8.5.1.1.7	BlueIpAddress	read-create	gateway ip address
INT pIntGetIpFromDhcp	1.3.6.1.4.1.9967.1.8.5.1.1.3	INTEGER	read-create	Obtain IP settings from a DHCP server for the interface
STR pIntHostName	1.3.6.1.4.1.9967.1.8.5.1.1.11	DisplayString	read-create	Hostname
I32 pIntId	1.3.6.1.4.1.9967.1.8.5.1.1.1	Integer32	not-accessible	A unique id for each protected interface
ADR pIntIpAddress	1.3.6.1.4.1.9967.1.8.5.1.1.5	BlueIpAddress	read-create	Ipaddress
STR pIntName	1.3.6.1.4.1.9967.1.8.5.1.1.2	DisplayString	read-create	Interface name
ADR pIntNetmask	1.3.6.1.4.1.9967.1.8.5.1.1.6	BlueIpAddress	read-create	netmask
ADR pIntPrimaryDNS	1.3.6.1.4.1.9967.1.8.5.1.1.8	BlueIpAddress	read-create	Primary DNS
INT pIntProxyArpStatus	1.3.6.1.4.1.9967.1.8.5.1.1.15	INTEGER	read-create
ROW pIntRowStatus	1.3.6.1.4.1.9967.1.8.5.1.1.16	RowStatus	read-create
ADR pIntSecondaryDNS	1.3.6.1.4.1.9967.1.8.5.1.1.9	BlueIpAddress	read-create	secondary DNS
pIntTable	1.3.6.1.4.1.9967.1.8.5.1		not-accessible	A list of pInt entries.
I32 pIntVlanId	1.3.6.1.4.1.9967.1.8.5.1.1.13	Integer32	read-create	VLAN Id associated with this protected interface
I32 pIntVlanInterface	1.3.6.1.4.1.9967.1.8.5.1.1.14	Integer32	read-create	VLAN type
policy	1.3.6.1.4.1.9967.1.5
OCT policyAction	1.3.6.1.4.1.9967.1.5.1.1.4	OCTET STRING	read-create	To allow or to deny the traffic. 'P' - allow 'D' - deny.
OCT policyDirection	1.3.6.1.4.1.9967.1.5.1.1.5	OCTET STRING	read-create	To decide the direction of the traffic. 'I' - incoming 'O' - Out going 'B' - Both ways
policyEntry	1.3.6.1.4.1.9967.1.5.1.1		not-accessible
I32 policyHostId	1.3.6.1.4.1.9967.1.5.1.1.3	Integer32	read-create	Host table Index associated with this policy. Row creation or set on this object fails on invalid host id
I32 policyId	1.3.6.1.4.1.9967.1.5.1.1.1	Integer32	not-accessible	Index of this table
ROW policyRowStatus	1.3.6.1.4.1.9967.1.5.1.1.10	RowStatus	read-create	The Row status attribute for row handling
I32 policyScheduleId	1.3.6.1.4.1.9967.1.5.1.1.9	Integer32	read-create	schedule id
I32 policySeqId	1.3.6.1.4.1.9967.1.5.1.1.6	Integer32	read-create	squence id
I32 policyServiceId	1.3.6.1.4.1.9967.1.5.1.1.2	Integer32	read-create	ServiceTable Index associated with this policy. Row creation or set on this object fails on invalid service id
policyTable	1.3.6.1.4.1.9967.1.5.1		not-accessible	Network traffic is checked against the following policies. If the service, direction, and destination match, the action is taken and checking ends. If no policy matches the policies in any inherited role(s) are checked, finally the traffic is denied if nothing matches
I32 policyVlanId	1.3.6.1.4.1.9967.1.5.1.1.8	Integer32	read-create	vlan id
pptp	1.3.6.1.4.1.9967.1.6.2
INT pptpEnable	1.3.6.1.4.1.9967.1.6.2.1	INTEGER	read-write
INT pptpEncryption128Bit	1.3.6.1.4.1.9967.1.6.2.6	INTEGER	read-write	Enable 128-bit encryption
INT pptpEncryption40Bit	1.3.6.1.4.1.9967.1.6.2.5	INTEGER	read-write	Enable 40-bit encryption
I32 pptpIdleTimeout	1.3.6.1.4.1.9967.1.6.2.7	Integer32	read-write	idle timeout
STR pptpLdapPwdAttrName	1.3.6.1.4.1.9967.1.6.2.8	DisplayString	read-write	The LDAP attribute name for the encrypted ntPassword.
ADR pptpLocalIpAddr	1.3.6.1.4.1.9967.1.6.2.4	BlueIpAddress	read-write
ADR pptpRemoteIpEndAddr	1.3.6.1.4.1.9967.1.6.2.3	BlueIpAddress	read-write
ADR pptpRemoteIpStartAddr	1.3.6.1.4.1.9967.1.6.2.2	BlueIpAddress	read-write
I32 pptpRoleId	1.3.6.1.4.1.9967.1.6.2.9	Integer32	read-write	For automatic role assignment of PPTP clients. The role Id represent row id from Role table
protected	1.3.6.1.4.1.9967.1.8.5
publicAccess	1.3.6.1.4.1.9967.1.7.6
I32 refreshThresholdInKbs	1.3.6.1.4.1.9967.1.6.1.7	Integer32	read-write	IKE Settings refresh threshold in kilobytes
I32 refreshThresholdInSecs	1.3.6.1.4.1.9967.1.6.1.6	Integer32	read-write	IKE Settings refresh threshold in seconds
STR remoteLog	1.3.6.1.4.1.9967.1.7.7.1.4	DisplayString	read-write	ip or the name of the remote server log
replication	1.3.6.1.4.1.9967.1.9
roleEntry	1.3.6.1.4.1.9967.1.11.1.1		not-accessible	A role entry containing information about a particular role.
I32 roleId	1.3.6.1.4.1.9967.1.11.1.1.1	Integer32	not-accessible	Index for this table
I32 roleInherit	1.3.6.1.4.1.9967.1.11.1.1.7	Integer32	read-create	Role id of the role to be inherited from
OCT roleName	1.3.6.1.4.1.9967.1.11.1.1.2	OCTET STRING	read-create	A unique name associated with this role
STR roleNotes	1.3.6.1.4.1.9967.1.11.1.1.10	DisplayString	read-create	User Notes
I32 roleQosDscpIn	1.3.6.1.4.1.9967.1.11.1.1.18	Integer32	read-create
OCT roleQosDscpInOverride	1.3.6.1.4.1.9967.1.11.1.1.20	OCTET STRING	read-create
I32 roleQosDscpOut	1.3.6.1.4.1.9967.1.11.1.1.19	Integer32	read-create
OCT roleQosDscpOutOverride	1.3.6.1.4.1.9967.1.11.1.1.21	OCTET STRING	read-create
OCT roleQosPriInOverride	1.3.6.1.4.1.9967.1.11.1.1.16	OCTET STRING	read-create
I32 roleQosPriorityIn	1.3.6.1.4.1.9967.1.11.1.1.14	Integer32	read-create
I32 roleQosPriorityOut	1.3.6.1.4.1.9967.1.11.1.1.15	Integer32	read-create
OCT roleQosPriOutOverride	1.3.6.1.4.1.9967.1.11.1.1.17	OCTET STRING	read-create
I32 roleQosQnt	1.3.6.1.4.1.9967.1.11.1.1.5	Integer32	read-create	The total bandwidth allocated to all users with this role
OCT roleQosRate	1.3.6.1.4.1.9967.1.11.1.1.4	OCTET STRING	read-create	The units of bandwidth allocated
I32 roleQosRateOut	1.3.6.1.4.1.9967.1.11.1.1.22	Integer32	read-create
OCT roleQosRateQntOut	1.3.6.1.4.1.9967.1.11.1.1.23	OCTET STRING	read-create
I32 roleQosUserIn	1.3.6.1.4.1.9967.1.11.1.1.12	Integer32	read-create
I32 roleQosUserOut	1.3.6.1.4.1.9967.1.11.1.1.13	Integer32	read-create
OCT roleRedirect	1.3.6.1.4.1.9967.1.11.1.1.25	OCTET STRING	read-create
ROW roleRowStatus	1.3.6.1.4.1.9967.1.11.1.1.26	RowStatus	read-create	The Row status attribute for row handling
roles	1.3.6.1.4.1.9967.1.11
roleTable	1.3.6.1.4.1.9967.1.11.1		not-accessible	A list of role entries.
OCT roleType	1.3.6.1.4.1.9967.1.11.1.1.3	OCTET STRING	read-create
I32 roleUnGuestLogin	1.3.6.1.4.1.9967.1.11.1.1.8	Integer32	read-create
I32 roleUnUserLogin	1.3.6.1.4.1.9967.1.11.1.1.9	Integer32	read-create
I32 roleVlanId	1.3.6.1.4.1.9967.1.11.1.1.24	Integer32	read-create
INT roleVpn	1.3.6.1.4.1.9967.1.11.1.1.6	INTEGER	read-create	Requires the user to connect to the WG-1000 with a vpn of this type already enabled
INT schedAllDay	1.3.6.1.4.1.9967.1.15.1.1.3	INTEGER	read-create
I32 schedDayOfMonth	1.3.6.1.4.1.9967.1.15.1.1.9	Integer32	read-create
LOC schedEndDateAndTime	1.3.6.1.4.1.9967.1.15.1.1.6	LocalDateAndTime	read-create
schedEntry	1.3.6.1.4.1.9967.1.15.1.1		not-accessible	List of scheds
INT schedEveryDay	1.3.6.1.4.1.9967.1.15.1.1.4	INTEGER	read-create
schedGrpEntry	1.3.6.1.4.1.9967.1.15.2.1		not-accessible
I32 schedGrpId	1.3.6.1.4.1.9967.1.15.2.1.1	Integer32	not-accessible	Table index
schedGrpMemEntry	1.3.6.1.4.1.9967.1.15.3.1		not-accessible
I32 schedGrpMemId	1.3.6.1.4.1.9967.1.15.3.1.1	Integer32	not-accessible	Table index
ROW schedGrpMemRowStatus	1.3.6.1.4.1.9967.1.15.3.1.2	RowStatus	read-create	The Row status attribute for row handling
schedGrpMemTable	1.3.6.1.4.1.9967.1.15.3		not-accessible	To define the schedule group members
OCT schedGrpName	1.3.6.1.4.1.9967.1.15.2.1.2	OCTET STRING	read-create	Unique name for every sched group
ROW schedGrpRowStatus	1.3.6.1.4.1.9967.1.15.2.1.3	RowStatus	read-create	The Row status attribute for row handling
schedGrpTable	1.3.6.1.4.1.9967.1.15.2		not-accessible	To define the schedule groups.
INT schedMonth	1.3.6.1.4.1.9967.1.15.1.1.7	INTEGER	read-create
OCT schedName	1.3.6.1.4.1.9967.1.15.1.1.2	OCTET STRING	read-create	Unique name for this schedule
I32 schedRowId	1.3.6.1.4.1.9967.1.15.1.1.1	Integer32	not-accessible	Index
ROW schedRowStatus	1.3.6.1.4.1.9967.1.15.1.1.10	RowStatus	read-create
LOC schedStartDateAndTime	1.3.6.1.4.1.9967.1.15.1.1.5	LocalDateAndTime	read-create
schedTable	1.3.6.1.4.1.9967.1.15.1		not-accessible	A list of schedule entries.
schedule	1.3.6.1.4.1.9967.1.15
INT schedWeekDay	1.3.6.1.4.1.9967.1.15.1.1.8	INTEGER	read-create
service	1.3.6.1.4.1.9967.1.4
I32 serviceCosDscpIn	1.3.6.1.4.1.9967.1.4.1.1.9	Integer32	read-create	Incoming DSCP value
I32 serviceCosDscpOut	1.3.6.1.4.1.9967.1.4.1.1.10	Integer32	read-create	Out going DSCP value
I32 serviceCosPriorityIn	1.3.6.1.4.1.9967.1.4.1.1.7	Integer32	read-create	Incoming priority
I32 serviceCosPriorityOut	1.3.6.1.4.1.9967.1.4.1.1.8	Integer32	read-create	Out going priority
serviceEntry	1.3.6.1.4.1.9967.1.4.1.1		not-accessible	List of services
serviceGrpEntry	1.3.6.1.4.1.9967.1.4.2.1		not-accessible
I32 serviceGrpId	1.3.6.1.4.1.9967.1.4.2.1.1	Integer32	not-accessible	Table index
serviceGrpMemEntry	1.3.6.1.4.1.9967.1.4.3.1		not-accessible
I32 serviceGrpMemId	1.3.6.1.4.1.9967.1.4.3.1.1	Integer32	not-accessible	Table index
ROW serviceGrpMemRowStatus	1.3.6.1.4.1.9967.1.4.3.1.2	RowStatus	read-create	The Row status attribute for row handling
serviceGrpMemTable	1.3.6.1.4.1.9967.1.4.3		not-accessible	To define the service group members.
OCT serviceGrpName	1.3.6.1.4.1.9967.1.4.2.1.2	OCTET STRING	read-create	Unique name for every service group
ROW serviceGrpRowStatus	1.3.6.1.4.1.9967.1.4.2.1.3	RowStatus	read-create	The Row status attribute for row handling
serviceGrpTable	1.3.6.1.4.1.9967.1.4.2		not-accessible	To define the sevice groups.
I32 serviceId	1.3.6.1.4.1.9967.1.4.1.1.1	Integer32	not-accessible	Index
serviceMgmt	1.3.6.1.4.1.9967.1.12
STR serviceMgmtDesr	1.3.6.1.4.1.9967.1.12.1.1.4	DisplayString	read-only	Contains service status message.
serviceMgmtEntry	1.3.6.1.4.1.9967.1.12.1.1		not-accessible
I32 serviceMgmtId	1.3.6.1.4.1.9967.1.12.1.1.1	Integer32	not-accessible	Service mgmt table Index
STR serviceMgmtName	1.3.6.1.4.1.9967.1.12.1.1.2	DisplayString	read-only	Service name
INT serviceMgmtOptStatus	1.3.6.1.4.1.9967.1.12.1.1.3	INTEGER	read-write	To start, stop or to retart different services. The default value is noopt. This object does not hold the current status of the service instead it holds the last operation performed on the selected service via SNMP.
serviceMgmtTable	1.3.6.1.4.1.9967.1.12.1		not-accessible
OCT serviceName	1.3.6.1.4.1.9967.1.4.1.1.2	OCTET STRING	read-create	Unique name for this service
STR serviceNotes	1.3.6.1.4.1.9967.1.4.1.1.11	DisplayString	read-create	User notes
I32 servicePort	1.3.6.1.4.1.9967.1.4.1.1.3	Integer32	read-create
OCT serviceProtocol	1.3.6.1.4.1.9967.1.4.1.1.4	OCTET STRING	read-create	The port associated with this service
ROW serviceRowStatus	1.3.6.1.4.1.9967.1.4.1.1.12	RowStatus	read-create	The Row status attribute for row handling
serviceTable	1.3.6.1.4.1.9967.1.4.1		not-accessible	A list of service entries.
OCT slaveAddress	1.3.6.1.4.1.9967.1.9.3.1.3	OCTET STRING	read-create
INT slaveEnabled	1.3.6.1.4.1.9967.1.9.3.1.2	INTEGER	read-create
slaveEntry	1.3.6.1.4.1.9967.1.9.3.1		not-accessible
I32 slaveId	1.3.6.1.4.1.9967.1.9.3.1.1	Integer32	not-accessible
INT slaveMobility	1.3.6.1.4.1.9967.1.9.3.1.6	INTEGER	read-create
STR slaveNotes	1.3.6.1.4.1.9967.1.9.3.1.4	DisplayString	read-create
ROW slaveRowStatus	1.3.6.1.4.1.9967.1.9.3.1.5	RowStatus	read-create	The Row status attribute for row handling
slaveTable	1.3.6.1.4.1.9967.1.9.3		not-accessible	A list of slave entries.
snmpConf	1.3.6.1.4.1.9967.1.7.8
snmpTrapConf	1.3.6.1.4.1.9967.1.7.8.1
STR snmpTrapMgmtCommunity	1.3.6.1.4.1.9967.1.7.8.1.1.1.3	DisplayString	read-create
snmpTrapMgmtEntry	1.3.6.1.4.1.9967.1.7.8.1.1.1		not-accessible	An snmpTrapMgmtEntry containing snmp client ipaddress and the trap community string for trap forwarding
I32 snmpTrapMgmtId	1.3.6.1.4.1.9967.1.7.8.1.1.1.1	Integer32	not-accessible
ADR snmpTrapMgmtIpAddress	1.3.6.1.4.1.9967.1.7.8.1.1.1.2	BlueIpAddress	read-create
ROW snmpTrapMgmtRowStatus	1.3.6.1.4.1.9967.1.7.8.1.1.1.4	RowStatus	read-create	The Row status attribute for row handling
snmpTrapMgmtTable	1.3.6.1.4.1.9967.1.7.8.1.1		not-accessible
statistics	1.3.6.1.4.1.9967.1.13
I32 statusRefreshTime	1.3.6.1.4.1.9967.1.7.2.4	Integer32	read-write	Time in seconds between refreshing status display
I32 statusUpTime	1.3.6.1.4.1.9967.1.7.2.1	Integer32	read-write	Time in seconds between updating internal status data
STR stThresholdAttrName	1.3.6.1.4.1.9967.1.7.9.1.1.2	DisplayString	read-only	The name of the attribute
stThresholdEntry	1.3.6.1.4.1.9967.1.7.9.1.1		not-accessible	To set threshold value for performance related attributes for sending traps and to predict the failover. This is a static table and has entries for the following attributes. Average CPU usage High Memory Swap High Disk Usage
I32 stThresholdId	1.3.6.1.4.1.9967.1.7.9.1.1.1	Integer32	not-accessible
stThresholdTable	1.3.6.1.4.1.9967.1.7.9.1		not-accessible
I32 stThresholdToFailover	1.3.6.1.4.1.9967.1.7.9.1.1.5	Integer32	read-create	Threshold for system failover
I32 stThresholdToLogMessage	1.3.6.1.4.1.9967.1.7.9.1.1.3	Integer32	read-create	Threshold for logging messages
I32 stThresholdToSendTrap	1.3.6.1.4.1.9967.1.7.9.1.1.4	Integer32	read-create	Threshold for sending snmp traps
I32 subnetIpConfIdInUse	1.3.6.1.4.1.9967.1.6.3.5	Integer32	read-write	The ipsec configuration to use: represent the row id from ipConfTable.
subnetVpn	1.3.6.1.4.1.9967.1.6.3
INT subnetVpnMode	1.3.6.1.4.1.9967.1.6.3.1	INTEGER	read-write	To enable or diable the subnet VPN option
ADR subnetVpnRtFirstIp	1.3.6.1.4.1.9967.1.6.3.2	BlueIpAddress	read-write	Client address range: First remote Ip address.
ADR subnetVpnRtLastIp	1.3.6.1.4.1.9967.1.6.3.3	BlueIpAddress	read-write	Client address range: Last remote Ip address.
STR subnetVpnSharedSec	1.3.6.1.4.1.9967.1.6.3.4	DisplayString	read-write	Group shared secret.
STR sysLogFacility	1.3.6.1.4.1.9967.1.7.7.1.5	DisplayString	read-write	Facility of remote syslog server
I32 sysStatCpuUtil	1.3.6.1.4.1.9967.1.13.2.1	Integer32	read-only	CPU utilization in percentage.
I32 sysStatDiskSpaceFree	1.3.6.1.4.1.9967.1.13.2.5	Integer32	read-only	Disk space free.
I32 sysStatDiskSpaceUsed	1.3.6.1.4.1.9967.1.13.2.4	Integer32	read-only	Disk space used.
I32 sysStatLOgSpaceUsed	1.3.6.1.4.1.9967.1.13.2.6	Integer32	read-only	Log space used in percentage.
I32 sysStatMemUtil	1.3.6.1.4.1.9967.1.13.2.2	Integer32	read-only	Memory utilization in Kilo bytes.
INT sysStatNeedRestart	1.3.6.1.4.1.9967.1.13.2.7	INTEGER	read-only	Log space used in percentage.
I32 sysStatTotalDiskSpace	1.3.6.1.4.1.9967.1.13.2.3	Integer32	read-only	Total Disk space.
systemStats	1.3.6.1.4.1.9967.1.13.2
systemTracker	1.3.6.1.4.1.9967.1.7.9
INT tDay	1.3.6.1.4.1.9967.1.7.4.3	INTEGER	read-write	System time setting:Day
INT tHours	1.3.6.1.4.1.9967.1.7.4.5	INTEGER	read-write	System time setting:Hours
time	1.3.6.1.4.1.9967.1.7.4
INT tMinutes	1.3.6.1.4.1.9967.1.7.4.6	INTEGER	read-write	System time setting:Minutes
INT tMonth	1.3.6.1.4.1.9967.1.7.4.2	INTEGER	read-write	System time setting:Month
STR tNtpServers	1.3.6.1.4.1.9967.1.7.4.9	DisplayString	read-write	List of NTP servers
STR tNtpSync	1.3.6.1.4.1.9967.1.7.4.8	DisplayString	read-write	NTP settings synchronize
INT tSeconds	1.3.6.1.4.1.9967.1.7.4.7	INTEGER	read-write	System time setting:Seconds.
I32 tYear	1.3.6.1.4.1.9967.1.7.4.4	Integer32	read-write	System time setting:Year
STR tZone	1.3.6.1.4.1.9967.1.7.4.1	DisplayString	read-write	Time zone
users	1.3.6.1.4.1.9967.1.1
userSummary	1.3.6.1.4.1.9967.1.13.1
I32 userSumNoOfLogdInUsr	1.3.6.1.4.1.9967.1.13.1.2	Integer32	read-only	Total number of logged in users.
I32 userSumNoOfLogdVPNUsr	1.3.6.1.4.1.9967.1.13.1.3	Integer32	read-only	Total number of logged in VPN tunnel users.
I32 userSumNoOfUsr	1.3.6.1.4.1.9967.1.13.1.1	Integer32	read-only	Total number of users.
I32 usmSumTtlBandWthInUse	1.3.6.1.4.1.9967.1.13.1.4	Integer32	read-only	Total bandwidth currently in use.
vlan	1.3.6.1.4.1.9967.1.14
vlanEntry	1.3.6.1.4.1.9967.1.14.1.1		not-accessible
vlanGrpEntry	1.3.6.1.4.1.9967.1.14.2.1		not-accessible
I32 vlanGrpId	1.3.6.1.4.1.9967.1.14.2.1.1	Integer32	not-accessible	Table index
vlanGrpMemEntry	1.3.6.1.4.1.9967.1.14.3.1		not-accessible
I32 vlanGrpMemId	1.3.6.1.4.1.9967.1.14.3.1.1	Integer32	not-accessible	Table index
ROW vlanGrpMemRowStatus	1.3.6.1.4.1.9967.1.14.3.1.2	RowStatus	read-create	The Row status attribute for row handling
vlanGrpMemTable	1.3.6.1.4.1.9967.1.14.3		not-accessible	To define the vlan group member table.
OCT vlanGrpName	1.3.6.1.4.1.9967.1.14.2.1.2	OCTET STRING	read-create	Unique name for every vlan group
ROW vlanGrpRowStatus	1.3.6.1.4.1.9967.1.14.2.1.3	RowStatus	read-create	The Row status attribute for row handling
vlanGrpTable	1.3.6.1.4.1.9967.1.14.2		not-accessible	To define the vlan groups.
I32 vlanId	1.3.6.1.4.1.9967.1.14.1.1.3	Integer32	read-create
OCT vlanName	1.3.6.1.4.1.9967.1.14.1.1.2	OCTET STRING	read-create	Unique name for this vlan
STR vlanNotes	1.3.6.1.4.1.9967.1.14.1.1.4	DisplayString	read-create	Notes
I32 vlanRowId	1.3.6.1.4.1.9967.1.14.1.1.1	Integer32	not-accessible	Index
ROW vlanRowStatus	1.3.6.1.4.1.9967.1.14.1.1.5	RowStatus	read-create	The Row status attribute for row handling
vlanTable	1.3.6.1.4.1.9967.1.14.1		not-accessible	A list of vlan entries.
vpn	1.3.6.1.4.1.9967.1.6

RFC description

Vendor-specific MIB from Bluesocket, Inc. (enterprise OID 1.3.6.1.4.1.9967) for management of Bluesocket network security appliances and related devices.

Start monitoring Bluesocket wireless LAN controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BLUESOCKET-MIB

What Is BLUESOCKET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description