BKTEL-HFC862-BES-V01-MIB

All MIBs › BKTEL-HFC862-BES-V01-MIB

Category: DOCSIS and Cable, Vendor: BKTEL

Description: Tracks back-end server (BES) interface parameters on BKTEL HFC-862 optical nodes within cable HFC networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BKTEL-HFC862-BES-V01-MIB?

BKTEL-HFC862-BES-V01-MIB is a BKTEL Communications vendor MIB for the back-end server (BES) interface component of the HFC-862 optical node platform used in hybrid fiber-coax cable networks. It exposes configuration and status parameters specific to the BES interface function within the optical node, such as its operational settings and link status toward the head-end. This module is oriented toward monitoring the hardware/interface status of the optical node's BES function within the HFC plant, important for detecting a degraded or failed back-end link that would affect downstream cable service. No sample objects or module description are available in the provided material to confirm specific object names or dependency on other MIBs. It's deployed on BKTEL HFC-862 optical nodes within a cable operator's hybrid fiber-coax outside-plant network. Engineers can download the BKTEL-HFC862-BES-V01-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BKTEL-HFC862-BES-V01-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BKTEL HFC-862 optical node (cable HFC network)

Monitoring Examples

No sample_objects were provided for this module, so no concrete object/table names from the input can ground a specific polling scenario. Based on the short description, an operator would expect to poll BES interface parameters to confirm the optical node's back-end link status and detect signal or connectivity degradation in the HFC plant. The exact object names would need to be confirmed from the actual MIB source.

Imported Objects

From BKTEL-HFC862-BASE-MIB

DisplayString
ModuleWidthValue
NESlotValue
PerceivedSeverityValue
TruthValue
modules	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises
experimental

OIDs

OID symbolic	OID numeric	Type	Access	Description
bes	1.3.6.1.4.1.7501.1.2.114
besCommon	1.3.6.1.4.1.7501.1.2.114.1
STR besCommonDescr	1.3.6.1.4.1.7501.1.2.114.1.2.1.3	DisplayString	read-write	A textual description of the module. If not available, this Value should be set to a zero length string.
besCommonEntry	1.3.6.1.4.1.7501.1.2.114.1.2.1		not-accessible	Common-Values for a module.
STR besCommonFirmwareId	1.3.6.1.4.1.7501.1.2.114.1.2.1.4	DisplayString	read-only	The firmware Id of the module.
MOD besCommonModuleWidth	1.3.6.1.4.1.7501.1.2.114.1.2.1.5	ModuleWidthValue	read-only	The width of the module in multiples of slots (1, 2, ...)
INT besCommonNumberOfModules	1.3.6.1.4.1.7501.1.2.114.1.1	INTEGER	read-only	Number of modules in table.
besCommonTable	1.3.6.1.4.1.7501.1.2.114.1.2		not-accessible	The table contains all modules of the BES-type in the NE
STR besCommonType	1.3.6.1.4.1.7501.1.2.114.1.2.1.2	DisplayString	read-only	The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown.
STR besConfigConfiguration	1.3.6.1.4.1.7501.1.2.114.3.1.1.3	DisplayString	read-only	Description of the active configuration
INT besConfigConfigurationIndex	1.3.6.1.4.1.7501.1.2.114.3.1.1.2	INTEGER	read-write	Index of the active configuration (1..besDisplayNumberOfConfigs)
NES besConfigNESlotWrite	1.3.6.1.4.1.7501.1.2.114.3.1.1.1	NESlotWriteValue	read-write	By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writable.
besConfiguration	1.3.6.1.4.1.7501.1.2.114.3
besConfigurationEntry	1.3.6.1.4.1.7501.1.2.114.3.1.1		not-accessible
besConfigurationTable	1.3.6.1.4.1.7501.1.2.114.3.1		not-accessible
besControl	1.3.6.1.4.1.7501.1.2.114.4
besControlEntry	1.3.6.1.4.1.7501.1.2.114.4.1.1		not-accessible	Alarms for a module.
T/F besControlModuleLedBlink	1.3.6.1.4.1.7501.1.2.114.4.1.1.2	TruthValue	read-write	Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stbes blinking at once. This variable always returns false(2) on read requests
T/F besControlReset	1.3.6.1.4.1.7501.1.2.114.4.1.1.1	TruthValue	read-write	Reset the module.
besControlTable	1.3.6.1.4.1.7501.1.2.114.4.1		not-accessible
besDisplay	1.3.6.1.4.1.7501.1.2.114.6
STR besDisplayConfiguration1	1.3.6.1.4.1.7501.1.2.114.6.1.1.4	DisplayString	read-only	Description of configuration no. #1
STR besDisplayConfiguration10	1.3.6.1.4.1.7501.1.2.114.6.1.1.13	DisplayString	read-only	Description of configuration no. #10
STR besDisplayConfiguration11	1.3.6.1.4.1.7501.1.2.114.6.1.1.14	DisplayString	read-only	Description of configuration no. #11
STR besDisplayConfiguration12	1.3.6.1.4.1.7501.1.2.114.6.1.1.15	DisplayString	read-only	Description of configuration no. #12
STR besDisplayConfiguration13	1.3.6.1.4.1.7501.1.2.114.6.1.1.16	DisplayString	read-only	Description of configuration no. #13
STR besDisplayConfiguration14	1.3.6.1.4.1.7501.1.2.114.6.1.1.17	DisplayString	read-only	Description of configuration no. #14
STR besDisplayConfiguration15	1.3.6.1.4.1.7501.1.2.114.6.1.1.18	DisplayString	read-only	Description of configuration no. #15
STR besDisplayConfiguration16	1.3.6.1.4.1.7501.1.2.114.6.1.1.19	DisplayString	read-only	Description of configuration no. #16
STR besDisplayConfiguration2	1.3.6.1.4.1.7501.1.2.114.6.1.1.5	DisplayString	read-only	Description of configuration no. #2
STR besDisplayConfiguration3	1.3.6.1.4.1.7501.1.2.114.6.1.1.6	DisplayString	read-only	Description of configuration no. #3
STR besDisplayConfiguration4	1.3.6.1.4.1.7501.1.2.114.6.1.1.7	DisplayString	read-only	Description of configuration no. #4
STR besDisplayConfiguration5	1.3.6.1.4.1.7501.1.2.114.6.1.1.8	DisplayString	read-only	Description of configuration no. #5
STR besDisplayConfiguration6	1.3.6.1.4.1.7501.1.2.114.6.1.1.9	DisplayString	read-only	Description of configuration no. #6
STR besDisplayConfiguration7	1.3.6.1.4.1.7501.1.2.114.6.1.1.10	DisplayString	read-only	Description of configuration no. #7
STR besDisplayConfiguration8	1.3.6.1.4.1.7501.1.2.114.6.1.1.11	DisplayString	read-only	Description of configuration no. #8
STR besDisplayConfiguration9	1.3.6.1.4.1.7501.1.2.114.6.1.1.12	DisplayString	read-only	Description of configuration no. #9
besDisplayEntry	1.3.6.1.4.1.7501.1.2.114.6.1.1		not-accessible
INT besDisplayInputVoltageNominal	1.3.6.1.4.1.7501.1.2.114.6.1.1.2	INTEGER	read-only	The nominal value of input voltage in 0.1 V units.
INT besDisplayNumberOfConfigs	1.3.6.1.4.1.7501.1.2.114.6.1.1.3	INTEGER	read-only	The number of different configurations supplied
INT besDisplayNumberOfPorts	1.3.6.1.4.1.7501.1.2.114.6.1.1.1	INTEGER	read-only	The number of ports
besDisplayPorts	1.3.6.1.4.1.7501.1.2.114.56
POR besDisplayPortsDuplexMode	1.3.6.1.4.1.7501.1.2.114.56.1.1.6	PortDuplexMode	read-only	Port duplex mode
besDisplayPortsEntry	1.3.6.1.4.1.7501.1.2.114.56.1.1		not-accessible
INT besDisplayPortsFiberRxWavelenMax	1.3.6.1.4.1.7501.1.2.114.56.1.1.12	INTEGER	read-only	Port maximum receive wavelength in units of nm (Fiber ports only)
INT besDisplayPortsFiberRxWavelenMin	1.3.6.1.4.1.7501.1.2.114.56.1.1.11	INTEGER	read-only	Port minimum receive wavelength in units of nm (Fiber ports only)
STR besDisplayPortsFiberSfpData	1.3.6.1.4.1.7501.1.2.114.56.1.1.13	DisplayString	read-only	Port SFP data text (Fiber ports only)
INT besDisplayPortsFiberTxDistance	1.3.6.1.4.1.7501.1.2.114.56.1.1.9	INTEGER	read-only	Port transmission distance in units of km (Fiber ports only)
INT besDisplayPortsFiberTxWavelen	1.3.6.1.4.1.7501.1.2.114.56.1.1.10	INTEGER	read-only	Port transmission wavelength in units of nm (Fiber ports only)
POR besDisplayPortsFlowControl	1.3.6.1.4.1.7501.1.2.114.56.1.1.8	PortFlowControl	read-only	Port speed
POR besDisplayPortsLinkState	1.3.6.1.4.1.7501.1.2.114.56.1.1.4	PortLinkState	read-only	Port link status
INT besDisplayPortsPortIndex	1.3.6.1.4.1.7501.1.2.114.56.1.1.1	INTEGER	read-only	Port index (1..besDisplayNumberOfPorts)
STR besDisplayPortsPortName	1.3.6.1.4.1.7501.1.2.114.56.1.1.2	DisplayString	read-only	Port name
POR besDisplayPortsSpeed	1.3.6.1.4.1.7501.1.2.114.56.1.1.7	PortSpeed	read-only	Port speed
POR besDisplayPortsStatus	1.3.6.1.4.1.7501.1.2.114.56.1.1.5	PortStatus	read-only	Port status
besDisplayPortsTable	1.3.6.1.4.1.7501.1.2.114.56.1		not-accessible
POR besDisplayPortsType	1.3.6.1.4.1.7501.1.2.114.56.1.1.3	PortType	read-only	Port type
besDisplayTable	1.3.6.1.4.1.7501.1.2.114.6.1		not-accessible
INT besInputVoltageHi	1.3.6.1.4.1.7501.1.2.114.5.1.1.9	INTEGER	read-only	The input supply voltage high warning threshold in steps of 0.1 Volts.
INT besInputVoltageHiHi	1.3.6.1.4.1.7501.1.2.114.5.1.1.10	INTEGER	read-only	The input supply voltage high alarm threshold in steps of 0.1 Volts.
INT besInputVoltageLo	1.3.6.1.4.1.7501.1.2.114.5.1.1.7	INTEGER	read-only	The input supply voltage low warning threshold in steps of 0.1 Volts.
INT besInputVoltageLoLo	1.3.6.1.4.1.7501.1.2.114.5.1.1.6	INTEGER	read-only	The input supply voltage low alarm threshold in steps of 0.1 Volts.
INT besInputVoltageValue	1.3.6.1.4.1.7501.1.2.114.5.1.1.8	INTEGER	read-only	The input supply voltage in steps of 0.1 Volts. Input supply voltage nominal value, see 'besDisplayInputVoltageNominal'
besMeasuringValues	1.3.6.1.4.1.7501.1.2.114.5
besMeasuringValuesEntry	1.3.6.1.4.1.7501.1.2.114.5.1.1		not-accessible	Common-Values for a module.
besMeasuringValuesTable	1.3.6.1.4.1.7501.1.2.114.5.1		not-accessible
NES besNESlot	1.3.6.1.4.1.7501.1.2.114.1.2.1.1	NESlotValue	read-only	The slot number of the chassis for which this entry contains management information.
besStates	1.3.6.1.4.1.7501.1.2.114.2
PER besStatesBootloader	1.3.6.1.4.1.7501.1.2.114.2.1.1.1	PerceivedSeverityValue	read-only	The device is running in bootloader mode without a legal application software.
PER besStatesCommLoss	1.3.6.1.4.1.7501.1.2.114.2.1.1.2	PerceivedSeverityValue	read-only	The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device
besStatesEntry	1.3.6.1.4.1.7501.1.2.114.2.1.1		not-accessible	Alarms for a module.
PER besStatesInputVoltageHigh	1.3.6.1.4.1.7501.1.2.114.2.1.1.6	PerceivedSeverityValue	read-only	Input supply voltage high
PER besStatesInputVoltageLow	1.3.6.1.4.1.7501.1.2.114.2.1.1.5	PerceivedSeverityValue	read-only	Input supply voltage low
besStatesTable	1.3.6.1.4.1.7501.1.2.114.2.1		not-accessible
PER besStatesTemperatureHigh	1.3.6.1.4.1.7501.1.2.114.2.1.1.4	PerceivedSeverityValue	read-only	Device temperature high
PER besStatesTemperatureLow	1.3.6.1.4.1.7501.1.2.114.2.1.1.3	PerceivedSeverityValue	read-only	Device temperature low
INT besTemperatureHi	1.3.6.1.4.1.7501.1.2.114.5.1.1.4	INTEGER	read-only	Device temperature high warning threshold in 0.1 celsius degrees.
INT besTemperatureHiHi	1.3.6.1.4.1.7501.1.2.114.5.1.1.5	INTEGER	read-only	Device temperature high alarm threshold in 0.1 celsius degrees.
INT besTemperatureLo	1.3.6.1.4.1.7501.1.2.114.5.1.1.2	INTEGER	read-only	Device temperature low warning threshold in 0.1 celsius degrees.
INT besTemperatureLoLo	1.3.6.1.4.1.7501.1.2.114.5.1.1.1	INTEGER	read-only	Device temperature low alarm threshold in 0.1 celsius degrees.
INT besTemperatureValue	1.3.6.1.4.1.7501.1.2.114.5.1.1.3	INTEGER	read-only	Device temperature in 0.1 celsius degrees.

RFC description

Monitors back-end server (BES) interface parameters of BKTEL HFC-862 optical nodes in cable HFC networks.

Start monitoring BKTEL HFC-862 optical node equipment (HFC cable plant) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BKTEL-HFC862-BES-V01-MIB

What Is BKTEL-HFC862-BES-V01-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description