BKTEL-HFC862-HMSNE-MIB

All MIBs › BKTEL-HFC862-HMSNE-MIB

Category: DOCSIS and Cable, Vendor: BKTEL

Description: Implements HMS NE (Hybrid Fiber Coax Management System Network Element) objects for BKTEL HFC-862 optical nodes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BKTEL-HFC862-HMSNE-MIB?

BKTEL-HFC862-HMSNE-MIB is a vendor-specific MIB from BKTEL Communications implementing Hybrid Fiber Coax Management System Network Element (HMS-NE) objects for their HFC-862 optical node product line, used in cable television/broadband HFC networks. It belongs to the network-element hardware and environmental monitoring category typical of the HMS-NE standard for HFC optical nodes and amplifiers. Its monitoring relevance is directly hardware-focused: HMS-NE style objects typically report power supply status, RF output levels, temperature, and alarm/fault conditions of the optical node hardware, which is exactly the kind of environmental/hardware health data operators need to catch failing nodes in the field. No module description or sample objects were supplied to confirm specific object names, but the HMS-NE naming strongly implies alignment with the SCTE HMS (Hybrid Management Sublayer) specification for outside-plant HFC equipment. It is deployed on BKTEL HFC-862 optical nodes installed in cable operator outside-plant HFC distribution networks. Engineers can download the BKTEL-HFC862-HMSNE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BKTEL-HFC862-HMSNE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BKTEL HFC-862 optical node
HFC outside-plant network element

Monitoring Examples

No sample_objects were provided for this module, so no concrete object/table names can be cited; based on the HMS-NE naming convention it would likely expose objects for optical node RF/optical power levels, power supply status, and temperature, consistent with SCTE HMS network-element MIBs. An operator would poll such objects to detect a node with abnormal RF output or an over-temperature condition, revealing a field hardware fault. No fabricated object names are used given the absence of sample data.

Imported Objects

From BKTEL-HFC862-BASE-MIB

DisplayString
NESlotValue
PerceivedSeverityValue
TruthValue
ne	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
neCommon	1.3.6.1.4.1.7501.1.1.1
neConfig	1.3.6.1.4.1.7501.1.1.3
INT neConfigDeprecated_MaxTrapLifetime	1.3.6.1.4.1.7501.1.1.3.5	INTEGER	read-write	This parameter is deprecated. (The maximum lifetime of a trap. Only used for HMS070 over RS232 interface)
INT neConfigDeprecated_MinTrapInterval	1.3.6.1.4.1.7501.1.1.3.4	INTEGER	read-write	This parameter is deprecated. (The minimum waiting time between two traps. Only used for HMS070 over RS232 interface)
INT neConfigObsolete_Alarmdelay	1.3.6.1.4.1.7501.1.1.3.3	INTEGER	read-write	This parameter is obsolete.
IP neConfigObsolete_IPaddress	1.3.6.1.4.1.7501.1.1.3.2	IpAddress	read-write	This parameter is obsolete.
INT neConfigObsolete_NEtype	1.3.6.1.4.1.7501.1.1.3.1	INTEGER	read-write	This parameter is obsolete.
neControl	1.3.6.1.4.1.7501.1.1.4
T/F neControlObsolete_SetDefaultAPS	1.3.6.1.4.1.7501.1.1.4.3	TruthValue	read-write	This parameter is obsolete.
T/F neControlResetModullist	1.3.6.1.4.1.7501.1.1.4.2	TruthValue	read-write	This command removes all disconnected (not responding) modules from the module list.
T/F neControlTrapDisable	1.3.6.1.4.1.7501.1.1.4.1	TruthValue	read-write	All traps and notifications for the whole NE are disabled: true(1) or enabled: false(2)
STR neDescription	1.3.6.1.4.1.7501.1.1.1.2	DisplayString	read-only	The description of the NE.
STR neLocationCity	1.3.6.1.4.1.7501.1.1.1.4	DisplayString	read-write	Location City of Network Element. Writable size depends on net element controller, default 32
STR neLocationStreet	1.3.6.1.4.1.7501.1.1.1.3	DisplayString	read-write	Location Street of Network Element. Writable size depends on net element controller, default 32
STR neModuleAliasName	1.3.6.1.4.1.7501.1.1.1.16.1.15	DisplayString	read-write	Module alias name
STR neModuleArticleNumber	1.3.6.1.4.1.7501.1.1.1.16.1.13	DisplayString	read-only	Module article number
STR neModuleCustomerCode	1.3.6.1.4.1.7501.1.1.1.16.1.14	DisplayString	read-only	Customer specific article code
STR neModuleDateOfProduction	1.3.6.1.4.1.7501.1.1.1.16.1.11	DisplayString	read-only	Module date of production, possible formats: - empty string -> no data defined - YYYY -> only the year of production is defined - YYYY-MM-DD -> full date of production is defined
neModuleEntry	1.3.6.1.4.1.7501.1.1.1.16.1		not-accessible	List of information about each Module.
STR neModuleFirmwareVersion	1.3.6.1.4.1.7501.1.1.1.16.1.9	DisplayString	read-only	Module firmware version
STR neModuleHardwareVersion	1.3.6.1.4.1.7501.1.1.1.16.1.10	DisplayString	read-only	Module hardware version
INT neModuleHousingType	1.3.6.1.4.1.7501.1.1.1.16.1.8	INTEGER	read-only	Module housing type
T/F neModuleLedBlink	1.3.6.1.4.1.7501.1.1.1.16.1.18	TruthValue	read-write	Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stops blinking at once. This variable always returns false(2) on read requests
OID neModuleMibLink	1.3.6.1.4.1.7501.1.1.1.16.1.4	OBJECT IDENTIFIER	read-only	Defines the link to the OID of the equiped module
STR neModuleModelName	1.3.6.1.4.1.7501.1.1.1.16.1.3	DisplayString	read-only	Module model name
NES neModuleNESlot	1.3.6.1.4.1.7501.1.1.1.16.1.1	NESlotValue	read-only	Slot number IMPORTANT NOTE: this is a not a physical slot within a module rack, but an assigned slot ID that uniquely identifies each module including non subrack based modules as 19 inch modules
T/F neModuleReset	1.3.6.1.4.1.7501.1.1.1.16.1.17	TruthValue	read-write	Resets the module if this parameter is written to true(1).
STR neModuleSerialNumber	1.3.6.1.4.1.7501.1.1.1.16.1.12	DisplayString	read-only	Module serial number
INT neModuleSlotRackDetection	1.3.6.1.4.1.7501.1.1.1.16.1.7	INTEGER	read-only	Reports the state of modules slot and rack hardware detection.
INT neModuleSlotUnitsUsed	1.3.6.1.4.1.7501.1.1.1.16.1.6	INTEGER	read-only	For modules of type 'housing19inch(4)' this parameter specfifies the number of 19 inch height units used. For all other module types the number of slots within subrack which the module occupies.
INT neModuleSubrack	1.3.6.1.4.1.7501.1.1.1.16.1.2	INTEGER	read-only	Subrack number in which the module is equiped (1 .. N). A value of 0 means: No subrack number
INT neModuleSubrackSlot	1.3.6.1.4.1.7501.1.1.1.16.1.5	INTEGER	read-only	Slot number within subrack in which the module is equiped (1 .. N). A value of 0 means: No slot number
neModuleTable	1.3.6.1.4.1.7501.1.1.1.16		not-accessible	Table containing information about each Module.
STR neModuleUserdata	1.3.6.1.4.1.7501.1.1.1.16.1.16	DisplayString	read-write	Module user data
INT neObsolete_APSMode	1.3.6.1.4.1.7501.1.1.1.6	INTEGER	read-write	This parameter is obsolete.
INT neObsolete_CommonSubrackNumber	1.3.6.1.4.1.7501.1.1.1.9	INTEGER	read-only	This parameter is obsolete. (The number of Subracks)
INT neObsolete_CommonSubrackWidth	1.3.6.1.4.1.7501.1.1.1.8	INTEGER	read-only	This parameter is obsolete. (The width of the Subracks)
INT neObsolete_InitPhase	1.3.6.1.4.1.7501.1.1.1.13	INTEGER	read-only	This parameter is obsolete.
INT neObsolete_NumberModul	1.3.6.1.4.1.7501.1.1.1.10	INTEGER	read-only	This parameter is obsolete. (Current number of entries in the Modul table)
IP neObsolete_PredecessorNominalPath	1.3.6.1.4.1.7501.1.1.1.15	IpAddress	read-write	This parameter is obsolete.
IP neObsolete_PredecessorRedundantPath	1.3.6.1.4.1.7501.1.1.1.14	IpAddress	read-write	This parameter is obsolete.
INT neObsolete_RevertiveMode	1.3.6.1.4.1.7501.1.1.1.12	INTEGER	read-write	This parameter is obsolete.
T/F neObsolete_UsingAPS	1.3.6.1.4.1.7501.1.1.1.5	TruthValue	read-only	This parameter is obsolete.
T/F neObsolete_UsingRevertiveMode	1.3.6.1.4.1.7501.1.1.1.11	TruthValue	read-only	This parameter is obsolete.
neStates	1.3.6.1.4.1.7501.1.1.2
PER neStatesObsolete_ActivateRedundantPath	1.3.6.1.4.1.7501.1.1.2.7	PerceivedSeverityValue	read-only	This parameter is obsolete.
PER neStatesObsolete_AutoOff	1.3.6.1.4.1.7501.1.1.2.8	PerceivedSeverityValue	read-only	This parameter is obsolete.
PER neStatesObsolete_Isolated	1.3.6.1.4.1.7501.1.1.2.4	PerceivedSeverityValue	read-only	This parameter is obsolete.
PER neStatesObsolete_Redundant	1.3.6.1.4.1.7501.1.1.2.6	PerceivedSeverityValue	read-only	This parameter is obsolete.
PER neStatesObsolete_ResetModullist	1.3.6.1.4.1.7501.1.1.2.5	PerceivedSeverityValue	read-only	This parameter is obsolete.
PER neStatesObsolete_TerminalConnected	1.3.6.1.4.1.7501.1.1.2.2	PerceivedSeverityValue	read-only	This parameter is obsolete.
PER neStatesObsolete_TrapDisable	1.3.6.1.4.1.7501.1.1.2.1	PerceivedSeverityValue	read-only	This parameter is obsolete.
NTF neSynchronizeEvent	1.3.6.1.4.1.7501.1.1.0.1			The SNMP trap that is generated when data on LMT must get actualized.
STR neType	1.3.6.1.4.1.7501.1.1.1.1	DisplayString	read-only	Type of NE

RFC description

Manages HMS-based network element including NE type, description, location, and module inventory information.

Start monitoring BKTEL HFC-862 optical node equipment (HFC cable plant) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BKTEL-HFC862-HMSNE-MIB

What Is BKTEL-HFC862-HMSNE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description