BIANCA-BRICK-MIBRES-MIB

All MIBs › BIANCA-BRICK-MIBRES-MIB

Organization: bintec elmeg GmbH

Last Updated: 2012-04-12

Description: MIB for monitoring CPU and system resource utilization on bintec elmeg BIANCA/BRICK routers, tracking per-processor load statistics across multiple time intervals

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-BRICK-MIBRES-MIB?

BIANCA-BRICK-MIBRES-MIB is a vendor-specific enterprise MIB from bintec elmeg providing resource administration/monitoring for BIANCA/BRICK routers, specifically CPU and system resource utilization. It falls into the hardware/system performance monitoring category. It is explicitly a hardware/software health MIB: it tracks per-processor CPU load statistics across multiple time intervals, letting an operator see whether the router's processor is approaching saturation over short-term versus longer-term windows, an early warning sign of performance degradation or overload. As a resource-administration MIB it likely stands somewhat independently in the bintec enterprise tree, though it may be polled alongside BIANCA-BRICK-IP-MIB for correlating load with traffic volume. It is deployed on bintec elmeg BIANCA/BRICK routers, especially multi-processor models, in small business and branch WAN roles. Engineers can download the BIANCA-BRICK-MIBRES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-MIBRES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

bintec elmeg BIANCA/BRICK router

Monitoring Examples

No sample_objects were provided for this module, so no concrete object/table names can be cited; per its description it would expose a per-processor CPU load table with multiple averaging intervals (e.g., 1-minute, 5-minute style load figures) similar in spirit to standard load-average monitoring. An operator would poll such a table to detect a processor whose load consistently exceeds a threshold across intervals, indicating the router is CPU-bound and may need traffic offload or a hardware upgrade. No fabricated object names are used given the empty sample_objects list.

Imported Objects

From BINTEC-MIB

resource

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1158-MIB

DisplayString

From SNMPv2-SMI

Unsigned32

How to Use in IPNetwork Monitor

Example using cpuTotalUser OID:

Select a bintec BIANCA/BRICK ISDN/VPN router (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cpuTotalUser into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total time in seconds spent in user mode since booting. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cpuTable	1.3.6.1.4.1.272.4.17.4.1		not-accessible	The CpuTable contains information about the processor statistics in the system.
cpuEntry	1.3.6.1.4.1.272.4.17.4.1.1		not-accessible
INT cpuNumber	1.3.6.1.4.1.272.4.17.4.1.1.1	INTEGER	read-only	CPU Number.
STR cpuDescr	1.3.6.1.4.1.272.4.17.4.1.1.2	DisplayString	read-only	Description of CPU.
INT cpuTotalUserEx	1.3.6.1.4.1.272.4.17.4.1.1.3	INTEGER	read-only	Total time in seconds spent in user mode since booting.
INT cpuTotalSystem	1.3.6.1.4.1.272.4.17.4.1.1.4	INTEGER	read-only	Total time in seconds spent in sytem mode since booting.
INT cpuTotalStreams	1.3.6.1.4.1.272.4.17.4.1.1.5	INTEGER	read-only	Total time in seconds spent with streams processing since booting.
INT cpuTotalIdle	1.3.6.1.4.1.272.4.17.4.1.1.6	INTEGER	read-only	Total idle time in seconds since booting.
INT cpuLoadUser	1.3.6.1.4.1.272.4.17.4.1.1.7	INTEGER	read-only	Percentage of time spent in user mode for the last second.
INT cpuLoadSystem	1.3.6.1.4.1.272.4.17.4.1.1.8	INTEGER	read-only	Percentage of time spent in system mode for the last second.
INT cpuLoadStreams	1.3.6.1.4.1.272.4.17.4.1.1.9	INTEGER	read-only	Percentage of time spent with streams processing for the last second.
INT cpuLoadIdle	1.3.6.1.4.1.272.4.17.4.1.1.10	INTEGER	read-only	Percentage of idle time for the last second.
INT cpuLoadUser10s	1.3.6.1.4.1.272.4.17.4.1.1.11	INTEGER	read-only	Percentage of time spent in user mode for the last 10 seconds.
INT cpuLoadSystem10s	1.3.6.1.4.1.272.4.17.4.1.1.12	INTEGER	read-only	Percentage of time spent in system mode for the last 10 seconds.
INT cpuLoadStreams10s	1.3.6.1.4.1.272.4.17.4.1.1.13	INTEGER	read-only	Percentage of time spent with streams processing for the last 10 seconds.
INT cpuLoadIdle10s	1.3.6.1.4.1.272.4.17.4.1.1.14	INTEGER	read-only	Percentage of idle time measured for the last 10 seconds.
INT cpuLoadUser60s	1.3.6.1.4.1.272.4.17.4.1.1.15	INTEGER	read-only	Percentage of time spent in user mode for the last 60 seconds.
INT cpuLoadSystem60s	1.3.6.1.4.1.272.4.17.4.1.1.16	INTEGER	read-only	Percentage of time spent in system mode for the last 60 seconds.
INT cpuLoadStreams60s	1.3.6.1.4.1.272.4.17.4.1.1.17	INTEGER	read-only	Percentage of time spent with streams processing for the last 60 seconds.
INT cpuLoadIdle60s	1.3.6.1.4.1.272.4.17.4.1.1.18	INTEGER	read-only	Percentage of idle time measured for the last 60 seconds.
memoryTable	1.3.6.1.4.1.272.4.17.4.2		not-accessible	The memoryTable contains information about the different memory in the system.
memoryEntry	1.3.6.1.4.1.272.4.17.4.2.1		not-accessible
INT memoryType	1.3.6.1.4.1.272.4.17.4.2.1.1	INTEGER	read-only	Type of memory: flash (1) : Non volatile memory dram (2) : Dynamic memory dpool (3) : Dynamic pool
STR memoryDescr	1.3.6.1.4.1.272.4.17.4.2.1.2	DisplayString	read-only	Description of memory.
U32 memoryBlockSize	1.3.6.1.4.1.272.4.17.4.2.1.3	Unsigned32	read-only	Allocation size for memories from dpools.
U32 memoryTotal	1.3.6.1.4.1.272.4.17.4.2.1.4	Unsigned32	read-only	Amount of available units of this memory type measured in units for dpools and bytes for flash/dram.
U32 memoryInuse	1.3.6.1.4.1.272.4.17.4.2.1.5	Unsigned32	read-only	Used units of this memory type measured in units for dpools and bytes for flash/dram.
U32 memoryDramUse	1.3.6.1.4.1.272.4.17.4.2.1.6	Unsigned32	read-only	dpools might take memory from dram. This variable gives the amount in bytes taken from a dram memory.
U32 memoryNAllocs	1.3.6.1.4.1.272.4.17.4.2.1.7	Unsigned32	read-only	Number of memory allocations.
U32 memoryNFrees	1.3.6.1.4.1.272.4.17.4.2.1.8	Unsigned32	read-only	Number of memory free operations.
U32 memoryNFails	1.3.6.1.4.1.272.4.17.4.2.1.9	Unsigned32	read-only	Number of failed memory operations.
dspTable	1.3.6.1.4.1.272.4.17.4.3		not-accessible	The DspTable contains information about Digital Signal processors in the system.
dspEntry	1.3.6.1.4.1.272.4.17.4.3.1		not-accessible
INT dspSlot	1.3.6.1.4.1.272.4.17.4.3.1.1	INTEGER	read-only	DSP Slot Number.
INT dspUnit	1.3.6.1.4.1.272.4.17.4.3.1.2	INTEGER	read-only	DSP Unit Number.
STR dspDescr	1.3.6.1.4.1.272.4.17.4.3.1.3	DisplayString	read-only	Description of DSP.
BIT dspCapabilities	1.3.6.1.4.1.272.4.17.4.3.1.4	Bits	read-only	This bitfield describes what the DSP supports.
INT dspTotalChannels	1.3.6.1.4.1.272.4.17.4.3.1.5	INTEGER	read-only	Total number of channels of this DSP.
INT dspUsedChannels	1.3.6.1.4.1.272.4.17.4.3.1.6	INTEGER	read-only	Number of used channels of this DSP.
resourceMIB	1.3.6.1.4.1.272.4.17.4.255			The MIB module for resource administration entities.

RFC description

Monitors CPU, memory, and system resource utilization on bintec elmeg Bianca Brick routing and gateway equipment.

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-BRICK-MIBRES-MIB

What Is BIANCA-BRICK-MIBRES-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description