All MIBs › BENU-TWAG-STATS-MIB
Organization: Benu Networks,Inc
Last Updated: 2016-07-27
Category: Vendor: Benu Networks
Description: Monitors statistics for the Benu Networks Trusted WLAN Access Gateway (TWAG), including session counts, traffic volumes, and subscriber metrics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BENU-TWAG-STATS-MIB?
BENU-TWAG-STATS-MIB reports operational statistics for the Trusted WLAN Access Gateway (TWAG) function on Benu Networks wireless access gateway platforms, used in Wi-Fi/cellular interworking (S2a, GTP, PMIPv6) deployments. It exposes counts of active GTP tunnels, current and pre-authenticated subscriber sessions across secure SSID/S2a and Gn/Gp interfaces, PMIPv6 tunnel counts, and interval-based traffic packet counters. As a stats-only MIB it gauges the software health and capacity load of the gateway, where subscriber/tunnel counts approaching provisioned limits or a sudden drop in active tunnels can indicate a signaling failure or capacity exhaustion. It builds on 3GPP interworking concepts (GTP, PMIPv6) rather than IETF standard MIBs, reflecting its telecom-specific protocol stack. It is typically deployed in mobile operator or enterprise Wi-Fi offload networks where a TWAG anchors trusted WLAN subscriber sessions, and operators can download the BENU-TWAG-STATS-MIB file to load into their monitoring systems.
IPNetwork Monitor allows you to monitor SNMP objects defined in BENU-TWAG-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Benu Networks Trusted WLAN Access Gateway (TWAG)
- mobile/Wi-Fi interworking gateway
Monitoring Examples
An operator would monitor bTWagGTPCurrentNumOfTunnels and bTWagNumCurrentSecureSSIDS2aSubscribers to track live subscriber load, alerting if the counts unexpectedly drop to zero, signaling a gateway or backhaul failure. The bTWagPmip6StatsTable/bTWagPmip6StatsEntry, keyed by bTWagPmip6StatsInterval, reports bTWagPmip6TotalPacketsRxvd per interval, letting an admin spot a stalled PMIPv6 tunnel when packet counts flatline despite active bTWagNumGrePmip6Tunnels.
What Can Be Monitored
- active GTP/PMIPv6 tunnel counts
- current and pre-authenticated subscriber sessions
- per-interval traffic packet counts
- S2a/Gn-Gp session statistics
This MIB depends on
Related MIBs
Imported Objects
From BENU-WAG-MIB
| benuWAG | MODULE-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| benuTWagStatsMIB | 1.3.6.1.4.1.39406.2.1.7 | This MIB module defines statistics of Benu Wireless Access Gateway. Copyright (C) 2012 by Benu Networks, Inc. All rights reserved. | ||
| U32 bTWagGnGpCPCRPAccepted | 1.3.6.1.4.1.39406.2.1.7.9.1.1.5 | Unsigned32 | read-only | The total number of Create PDP Context Responses(CPCRP) with cause REQUEST_ACCEPTED received by the TWAG during the measurement interval. |
| U32 bTWagGnGpCPCRPRcvd | 1.3.6.1.4.1.39406.2.1.7.9.1.1.4 | Unsigned32 | read-only | The total number of Create PDP Context Responses(CPCRP) received by the TWAG during the measurement interval. |
| U32 bTWagGnGpCPCRPRej | 1.3.6.1.4.1.39406.2.1.7.9.1.1.6 | Unsigned32 | read-only | The total number of Create PDP Context Responses(CPCRP) with cause REJECT received by the TWAG during the measurement interval. |
| U32 bTWagGnGpCPCRPSent | 1.3.6.1.4.1.39406.2.1.7.9.1.1.13 | Unsigned32 | read-only | The total number of Create PDP Context Response(CPCRP) messages sent during measurement interval. |
| U32 bTWagGnGpCPCRQRcvd | 1.3.6.1.4.1.39406.2.1.7.9.1.1.12 | Unsigned32 | read-only | The total number of Create PDP Context Request(CPCRQ) messages received during measurement interval. |
| U32 bTWagGnGpCPCRQSent | 1.3.6.1.4.1.39406.2.1.7.9.1.1.3 | Unsigned32 | read-only | The total number of Create PDP Context requests(CPCRQ) initiated by the TWAG during the measurement interval. |
| U32 bTWagGnGpDPCRPRcvd | 1.3.6.1.4.1.39406.2.1.7.9.1.1.8 | Unsigned32 | read-only | The total number of Delete PDP Context Response(DPCRP) messages received during measurement interval. |
| U32 bTWagGnGpDPCRPRejRcvd | 1.3.6.1.4.1.39406.2.1.7.9.1.1.9 | Unsigned32 | read-only | The total number of Delete PDP Context Response(DPCRP) messages received with cause REJECT during measurement interval. |
| U32 bTWagGnGpDPCRPSent | 1.3.6.1.4.1.39406.2.1.7.9.1.1.11 | Unsigned32 | read-only | The total number of Delete PDP Context Response(DPCRP) messages sent during measurement interval. |
| U32 bTWagGnGpDPCRQRcvd | 1.3.6.1.4.1.39406.2.1.7.9.1.1.10 | Unsigned32 | read-only | The total number of Delete PDP Context Request(DPCRQ) messages received during measurement interval. |
| U32 bTWagGnGpDPCRQSent | 1.3.6.1.4.1.39406.2.1.7.9.1.1.7 | Unsigned32 | read-only | The total number of Delete PDP Context Requests(DPCRQ) initiated by the TWAG during the measurement interval. |
| bTWagGnGpEntry | 1.3.6.1.4.1.39406.2.1.7.9.1.1 | not-accessible | A logical row in the bTWagGnGpTable. | |
| I32 bTWagGnGpIntervalDuration | 1.3.6.1.4.1.39406.2.1.7.9.1.1.2 | Integer32 | read-only | Duration of statistics accumulation interval in minutes. |
| bTWagGnGpNotifObjects | 1.3.6.1.4.1.39406.2.1.7.10 | Notifications of TWAG GnGp interface statistics are defined in this branch. | ||
| I32 bTWagGnGpStatsInterval | 1.3.6.1.4.1.39406.2.1.7.9.1.1.1 | Integer32 | not-accessible | The interval during which the measurements are accumlated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1. |
| bTWagGnGpStatsMIBObjects | 1.3.6.1.4.1.39406.2.1.7.9 | TWAG GnGp interface statistics are defined in this branch. | ||
| U32 bTWagGnGpSubsCPCRQSendFailed | 1.3.6.1.4.1.39406.2.1.7.7.3.1.7 | Unsigned32 | read-only | The total number of CSRQ message send failed for GnGp subscribers. |
| bTWagGnGpSubscriberEntry | 1.3.6.1.4.1.39406.2.1.7.7.3.1 | not-accessible | A logical row in the bTWagGnGpSubscriberTable. | |
| bTWagGnGpSubscriberMIBObjects | 1.3.6.1.4.1.39406.2.1.7.7 | TWAG GnGp subscriber statistics are defined in this branch. | ||
| bTWagGnGpSubscriberNotifObjects | 1.3.6.1.4.1.39406.2.1.7.8 | Notifications of TWAG GnGp subscriber statistics are defined in this branch. | ||
| bTWagGnGpSubscriberTable | 1.3.6.1.4.1.39406.2.1.7.7.3 | not-accessible | A list of TWAG subscriber statistics. | |
| U32 bTWagGnGpSubsDeletionsByDMinitiatedByGGSN | 1.3.6.1.4.1.39406.2.1.7.7.3.1.5 | Unsigned32 | read-only | The total number of GnGp subscribers deleted due to GGSN initiated Disconnect Message |
| U32 bTWagGnGpSubsGtpIPAddFailed | 1.3.6.1.4.1.39406.2.1.7.7.3.1.16 | Unsigned32 | read-only | The total number of subscriber for whom GTP IP Add failed |
| U32 bTWagGnGpSubsGtpSessionCreateFailed | 1.3.6.1.4.1.39406.2.1.7.7.3.1.6 | Unsigned32 | read-only | The total number of GnGp GTP subscriber session creation failed |
| I32 bTWagGnGpSubsIntervalDuration | 1.3.6.1.4.1.39406.2.1.7.7.3.1.2 | Integer32 | read-only | Duration of statistics interval (or reporting period) in minutes |
| U32 bTWagGnGpSubsInvalidGtpVersion | 1.3.6.1.4.1.39406.2.1.7.7.3.1.9 | Unsigned32 | read-only | The total number of subscribers encountered with invalid GTP version |
| U32 bTWagGnGpSubsPDPCtxSendFailed | 1.3.6.1.4.1.39406.2.1.7.7.3.1.8 | Unsigned32 | read-only | The total number of CPCQ QoS message send failed for GnGp subscribers. |
| U32 bTWagGnGpSubsRadiusEapAkaHash | 1.3.6.1.4.1.39406.2.1.7.7.3.1.17 | Unsigned32 | read-only | The total number of subscriber authenticated via EAP-AKA HASH |
| U32 bTWagGnGpSubsRadiusGBRQoS | 1.3.6.1.4.1.39406.2.1.7.7.3.1.14 | Unsigned32 | read-only | The total number of subscriber with GBRQoS received in radius messages. |
| U32 bTWagGnGpSubsRadiusInvalidGGSNIPAddr | 1.3.6.1.4.1.39406.2.1.7.7.3.1.11 | Unsigned32 | read-only | The total number of subscriber with invalid PGW IP address in radius messages. |
| U32 bTWagGnGpSubsRadiusMissingMandatoryParams | 1.3.6.1.4.1.39406.2.1.7.7.3.1.10 | Unsigned32 | read-only | The total number of subscribers with missing mandatory params in radius messages. |
| U32 bTWagGnGpSubsRadiusMSISDN | 1.3.6.1.4.1.39406.2.1.7.7.3.1.12 | Unsigned32 | read-only | The total number of subscriber with MSISDN received in radius messages. |
| U32 bTWagGnGpSubsRadiusNonGBRQoS | 1.3.6.1.4.1.39406.2.1.7.7.3.1.15 | Unsigned32 | read-only | The total number of subscriber with NonGBRQoS received in radius messages. |
| U32 bTWagGnGpSubsRadiusQoSProfile | 1.3.6.1.4.1.39406.2.1.7.7.3.1.13 | Unsigned32 | read-only | The total number of subscriber with QoS Profile received in radius messages. |
| I32 bTWagGnGpSubsStatsInterval | 1.3.6.1.4.1.39406.2.1.7.7.3.1.1 | Integer32 | not-accessible | The interval during which the measurements are accumlated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1. |
| bTWagGnGpTable | 1.3.6.1.4.1.39406.2.1.7.9.1 | not-accessible | A list of TWAG GnGp interface statistics. | |
| U32 bTWagGnGpUPCRPSent | 1.3.6.1.4.1.39406.2.1.7.9.1.1.15 | Unsigned32 | read-only | The total number of Update PDP Context Response(UPCRP) messages sent during measurement interval. |
| U32 bTWagGnGpUPCRQRcvd | 1.3.6.1.4.1.39406.2.1.7.9.1.1.14 | Unsigned32 | read-only | The total number of Update PDP Conetxt Request(UPCRQ) messages received during measurement interval. |
| U32 bTWagGTPCurrentNumOfTunnels | 1.3.6.1.4.1.39406.2.1.7.5.1 | Unsigned32 | read-only | The current number of GTP Tunnels. |
| U32 bTWagGTPHighThreshold | 1.3.6.1.4.1.39406.2.1.7.6.2 | Unsigned32 | accessible-for-notify | The high threshold for number of GTP-U that can exist at any given time . If a bTWagGTPLowThresholdReached event has been generated , and the value number of GTP-U in use has exceeded the value of bTWagGTPHighThreshold, then a bTWagGTPHighThresholdReached event will be generated. No more bTWagGTPHighThresholdReached events will be generated until the value for number of tunnels in use becomes equal to or less than the value of bTWagGTPLowThreshold. |
| NTF bTWagGTPHighThresholdReached | 1.3.6.1.4.1.39406.2.1.7.0.1 | This notification signifies that the current number of GTP-U has risen above the value of bTWagGTPHighThreshold. | ||
| U32 bTWagGTPLowThreshold | 1.3.6.1.4.1.39406.2.1.7.6.3 | Unsigned32 | accessible-for-notify | The Lower threshold for number of GTP-U that can exist at any given time . If a bTWagGTPHighThresholdReached event has been generated , and the value number of tunnels in use falls below the value of bTWagGTPLowThreshold, then a bTWagGTPLowThresholdReached event will be generated. No more bTWagGTPLowThresholdReached events will be generated until the value for number of tunnels in use becomes equal to or greater than the value of bTWagGTPHighThreshold. |
| NTF bTWagGTPLowThresholdReached | 1.3.6.1.4.1.39406.2.1.7.0.2 | This notification signifies that the current number of GTP-U has fallen below the value of bTWagGTPLowThreshold. | ||
| U32 bTWagGTPMaxNumOfTunnels | 1.3.6.1.4.1.39406.2.1.7.6.1 | Unsigned32 | accessible-for-notify | Max Number of GTP-U that can exist at a given time. Any new GTP-U request beyond this number will be rejected |
| bTWagGTPNotifObjects | 1.3.6.1.4.1.39406.2.1.7.6 | Notifications of TWAG GTP statistics are defined in this branch. | ||
| bTWagGTPStatsMIBObjects | 1.3.6.1.4.1.39406.2.1.7.5 | TWAG GTP statistics are defined in this branch. | ||
| bTWagNotifications | 1.3.6.1.4.1.39406.2.1.7.0 | TWAG notifications are defined in this branch. | ||
| U32 bTWagNumCurrentSecureSSIDGnGpSubscribers | 1.3.6.1.4.1.39406.2.1.7.7.1 | Unsigned32 | read-only | The current number of 802.1x subscribers. |
| U32 bTWagNumCurrentSecureSSIDS2aSubscribers | 1.3.6.1.4.1.39406.2.1.7.1.1 | Unsigned32 | read-only | The current number of 802.1x subscribers. |
| U32 bTWagNumGrePmip6Tunnels | 1.3.6.1.4.1.39406.2.1.7.11.2 | Unsigned32 | read-only | The current total number of Gre Pmip6 tunnels. |
| U32 bTWagNumPreAuthenticatedGnGpSubscribers | 1.3.6.1.4.1.39406.2.1.7.7.2 | Unsigned32 | read-only | The total number of pre-authenticated subscribers. |
| U32 bTWagNumPreAuthenticatedPmip6Subscribers | 1.3.6.1.4.1.39406.2.1.7.11.1 | Unsigned32 | read-only | The current total number of pre-authenticated subscribers. |
| U32 bTWagNumPreAuthenticatedS2aSubscribers | 1.3.6.1.4.1.39406.2.1.7.1.2 | Unsigned32 | read-only | The total number of pre-authenticated subscribers. |
| U32 bTWagPmip6DeletedDueToLmaInitBriMsg | 1.3.6.1.4.1.39406.2.1.7.11.3.1.15 | Unsigned32 | read-only | The total number of Pmip6 subscribers deleted due to Lma initiated Bri message |
| U32 bTWagPmip6HeartBeatReqRestartCountMismatch | 1.3.6.1.4.1.39406.2.1.7.11.3.1.13 | Unsigned32 | read-only | The total number of Pmip6 heartbeat request restart counter mismatch |
| U32 bTWagPmip6HeartBeatReqSent | 1.3.6.1.4.1.39406.2.1.7.11.3.1.11 | Unsigned32 | read-only | The total number of Pmip6 heartbeat request sent |
| U32 bTWagPmip6HeartBeatReqSeqMismatch | 1.3.6.1.4.1.39406.2.1.7.11.3.1.14 | Unsigned32 | read-only | The total number of Pmip6 heartbeat request restart sequence mismatch |
| U32 bTWagPmip6HeartBeatRspSent | 1.3.6.1.4.1.39406.2.1.7.11.3.1.12 | Unsigned32 | read-only | The total number of Pmip6 heartbeat response sent |
| I32 bTWagPmip6IntervalDuration | 1.3.6.1.4.1.39406.2.1.7.11.3.1.2 | Integer32 | read-only | Duration of statistics interval (or reporting period) in minutes |
| bTWagPmip6MIBObjects | 1.3.6.1.4.1.39406.2.1.7.11 | TWAG Pmip6 statistics are defined in this branch. | ||
| bTWagPmip6StatsEntry | 1.3.6.1.4.1.39406.2.1.7.11.3.1 | not-accessible | A logical row in the bTWagPmip6StatsTable. | |
| I32 bTWagPmip6StatsInterval | 1.3.6.1.4.1.39406.2.1.7.11.3.1.1 | Integer32 | not-accessible | The interval during which the measurements are accumlated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1. |
| bTWagPmip6StatsTable | 1.3.6.1.4.1.39406.2.1.7.11.3 | not-accessible | A list of TWAG Pmip6 statistics. | |
| U32 bTWagPmip6TotalBraSent | 1.3.6.1.4.1.39406.2.1.7.11.3.1.10 | Unsigned32 | read-only | The total number of Pmip6 binding revocation ack packets sent |
| U32 bTWagPmip6TotalBriReceived | 1.3.6.1.4.1.39406.2.1.7.11.3.1.9 | Unsigned32 | read-only | The total number of Pmip6 binding revocation indication packets received |
| U32 bTWagPmip6TotalPacketHeaderDecodeError | 1.3.6.1.4.1.39406.2.1.7.11.3.1.5 | Unsigned32 | read-only | The total number of Pmip6 packet header decode errors |
| U32 bTWagPmip6TotalPacketsRxvd | 1.3.6.1.4.1.39406.2.1.7.11.3.1.3 | Unsigned32 | read-only | The total number of Pmip6 packets received |
| U32 bTWagPmip6TotalPacketsRxvdError | 1.3.6.1.4.1.39406.2.1.7.11.3.1.4 | Unsigned32 | read-only | The total number of Pmip6 error packets received |
| U32 bTWagPmip6TotalPbaReceived | 1.3.6.1.4.1.39406.2.1.7.11.3.1.8 | Unsigned32 | read-only | The total number of Pmip6 proxy binding ack packets received |
| U32 bTWagPmip6TotalPbuSendError | 1.3.6.1.4.1.39406.2.1.7.11.3.1.7 | Unsigned32 | read-only | The total number of Pmip6 proxy binding update packets send error |
| U32 bTWagPmip6TotalPbuSent | 1.3.6.1.4.1.39406.2.1.7.11.3.1.6 | Unsigned32 | read-only | The total number of Pmip6 proxy binding update packets sent |
| U32 bTWagPreAuthenticatedGnGpSubsAdded | 1.3.6.1.4.1.39406.2.1.7.7.3.1.4 | Unsigned32 | read-only | The total number of pre authenticated GnGp subscribers added |
| U32 bTWagPreAuthenticatedS2aSubsAdded | 1.3.6.1.4.1.39406.2.1.7.1.3.1.4 | Unsigned32 | read-only | The total number of pre authenticated S2a subscribers added |
| U32 bTWagS2aCBRPSent | 1.3.6.1.4.1.39406.2.1.7.3.1.1.13 | Unsigned32 | read-only | The total number of Create Bearer Response(CBRP) messages sent during measurement interval. |
| U32 bTWagS2aCBRQRcvd | 1.3.6.1.4.1.39406.2.1.7.3.1.1.12 | Unsigned32 | read-only | The total number of Create Bearer Request(CBRQ) messages received during measurement interval. |
| U32 bTWagS2aDBRPSent | 1.3.6.1.4.1.39406.2.1.7.3.1.1.11 | Unsigned32 | read-only | The total number of Delete Bearer Response(DBRP) messages sent during measurement interval. |
| U32 bTWagS2aDBRQRcvd | 1.3.6.1.4.1.39406.2.1.7.3.1.1.10 | Unsigned32 | read-only | The total number of Delete Bearer Request(DBRQ) messages received during measurement interval. |
| bTWagS2aEntry | 1.3.6.1.4.1.39406.2.1.7.3.1.1 | not-accessible | A logical row in the bTWagS2aTable. | |
| I32 bTWagS2aIntervalDuration | 1.3.6.1.4.1.39406.2.1.7.3.1.1.2 | Integer32 | read-only | Duration of statistics accumulation interval in minutes. |
| bTWagS2aNotifObjects | 1.3.6.1.4.1.39406.2.1.7.4 | Notifications of TWAG s2a interface statistics are defined in this branch. | ||
| U32 bTWagS2aSessCreateReqSent | 1.3.6.1.4.1.39406.2.1.7.3.1.1.3 | Unsigned32 | read-only | The total number of Create Session Requests(CSRQ) initiated by the TWAG during the measurement interval. |
| U32 bTWagS2aSessCreateRespAccepted | 1.3.6.1.4.1.39406.2.1.7.3.1.1.5 | Unsigned32 | read-only | The total number of Create Session Responses with cause REQUEST_ACCEPTED received by the TWAG during the measurement interval. |
| U32 bTWagS2aSessCreateRespRcvd | 1.3.6.1.4.1.39406.2.1.7.3.1.1.4 | Unsigned32 | read-only | The total number of Create Session Responses(CSRP) received by the TWAG during the measurement interval. |
| U32 bTWagS2aSessCreateRespRej | 1.3.6.1.4.1.39406.2.1.7.3.1.1.6 | Unsigned32 | read-only | The total number of Create Session Responses with cause REJECT received by the TWAG during the measurement interval. |
| U32 bTWagS2aSessDelReqSent | 1.3.6.1.4.1.39406.2.1.7.3.1.1.7 | Unsigned32 | read-only | The total number of Delete Session Requests initiated by the TWAG during the measurement interval. |
| U32 bTWagS2aSessDelRespRcvd | 1.3.6.1.4.1.39406.2.1.7.3.1.1.8 | Unsigned32 | read-only | The total number of delete Session Response messages received during measurement interval. |
| U32 bTWagS2aSessDelRespRejRcvd | 1.3.6.1.4.1.39406.2.1.7.3.1.1.9 | Unsigned32 | read-only | The total number of delete Session Response messages received with cause REJECT during measurement interval. |
| I32 bTWagS2aStatsInterval | 1.3.6.1.4.1.39406.2.1.7.3.1.1.1 | Integer32 | not-accessible | The interval during which the measurements are accumlated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1. |
| bTWagS2aStatsMIBObjects | 1.3.6.1.4.1.39406.2.1.7.3 | TWAG s2a interface statistics are defined in this branch. | ||
| bTWagS2aSubscriberEntry | 1.3.6.1.4.1.39406.2.1.7.1.3.1 | not-accessible | A logical row in the bTWagS2aSubscriberTable. | |
| bTWagS2aSubscriberMIBObjects | 1.3.6.1.4.1.39406.2.1.7.1 | TWAG S2a subscriber statistics are defined in this branch. | ||
| bTWagS2aSubscriberNotifObjects | 1.3.6.1.4.1.39406.2.1.7.2 | Notifications of TWAG S2a subscriber statistics are defined in this branch. | ||
| bTWagS2aSubscriberTable | 1.3.6.1.4.1.39406.2.1.7.1.3 | not-accessible | A list of TWAG S2a subscriber statistics. | |
| U32 bTWagS2aSubsCSRQSendFailed | 1.3.6.1.4.1.39406.2.1.7.1.3.1.7 | Unsigned32 | read-only | The total number of CSRQ message send failed for S2a subscribers. |
| U32 bTWagS2aSubsDeletionsByDMinitiatedByPGW | 1.3.6.1.4.1.39406.2.1.7.1.3.1.5 | Unsigned32 | read-only | The total number of S2a subscribers deleted due to PGW initiated Disconnect Message |
| U32 bTWagS2aSubsGtpIPAddFailed | 1.3.6.1.4.1.39406.2.1.7.1.3.1.16 | Unsigned32 | read-only | The total number of subscriber for whom GTP IP Add failed |
| U32 bTWagS2aSubsGtpSessionCreateFailed | 1.3.6.1.4.1.39406.2.1.7.1.3.1.6 | Unsigned32 | read-only | The total number of S2a GTP subscriber session creation failed |
| I32 bTWagS2aSubsIntervalDuration | 1.3.6.1.4.1.39406.2.1.7.1.3.1.2 | Integer32 | read-only | Duration of statistics interval (or reporting period) in minutes |
| U32 bTWagS2aSubsInvalidGtpVersion | 1.3.6.1.4.1.39406.2.1.7.1.3.1.9 | Unsigned32 | read-only | The total number of subscribers encountered with invalid GTP version |
| U32 bTWagS2aSubsRadiusEapAkaHash | 1.3.6.1.4.1.39406.2.1.7.1.3.1.17 | Unsigned32 | read-only | The total number of subscriber authenticated via EAP-AKA HASH |
| U32 bTWagS2aSubsRadiusGBRQoS | 1.3.6.1.4.1.39406.2.1.7.1.3.1.14 | Unsigned32 | read-only | The total number of subscriber with GBRQoS received in radius messages. |
| U32 bTWagS2aSubsRadiusInvalidPGWIPAddr | 1.3.6.1.4.1.39406.2.1.7.1.3.1.11 | Unsigned32 | read-only | The total number of subscriber with invalid PGW IP address in radius messages. |
| U32 bTWagS2aSubsRadiusMissingMandatoryParams | 1.3.6.1.4.1.39406.2.1.7.1.3.1.10 | Unsigned32 | read-only | The total number of subscribers with missing mandatory params in radius messages. |
| U32 bTWagS2aSubsRadiusMSISDN | 1.3.6.1.4.1.39406.2.1.7.1.3.1.12 | Unsigned32 | read-only | The total number of subscriber with MSISDN received in radius messages. |
| U32 bTWagS2aSubsRadiusNonGBRQoS | 1.3.6.1.4.1.39406.2.1.7.1.3.1.15 | Unsigned32 | read-only | The total number of subscriber with NonGBRQoS received in radius messages. |
| U32 bTWagS2aSubsRadiusQoSProfile | 1.3.6.1.4.1.39406.2.1.7.1.3.1.13 | Unsigned32 | read-only | The total number of subscriber with QoS Profile received in radius messages. |
| I32 bTWagS2aSubsStatsInterval | 1.3.6.1.4.1.39406.2.1.7.1.3.1.1 | Integer32 | not-accessible | The interval during which the measurements are accumlated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1. |
| bTWagS2aTable | 1.3.6.1.4.1.39406.2.1.7.3.1 | not-accessible | A list of TWAG S2a interface statistics. | |
| U32 bTWagS2aUBRPSent | 1.3.6.1.4.1.39406.2.1.7.3.1.1.15 | Unsigned32 | read-only | The total number of Update Bearer Response(UBRP) messages sent during measurement interval. |
| U32 bTWagS2aUBRQRcvd | 1.3.6.1.4.1.39406.2.1.7.3.1.1.14 | Unsigned32 | read-only | The total number of Update Bearer Request(UBRQ) messages received during measurement interval. |
| U32 bTWagSecureSSIDGnGpSubsAdded | 1.3.6.1.4.1.39406.2.1.7.7.3.1.3 | Unsigned32 | read-only | The total number of secure SSID GnGp subscribers added |
| U32 bTWagSecureSSIDS2aSubsAdded | 1.3.6.1.4.1.39406.2.1.7.1.3.1.3 | Unsigned32 | read-only | The total number of secure SSID S2a subscribers added |
RFC description
Provides statistics for Benu Wireless Access Gateway including subscriber sessions, GTP, and interface traffic data.
Start monitoring Benu Networks gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.