BAY-STACK-SFF-MIB

All MIBs › BAY-STACK-SFF-MIB

Organization: Avaya

Last Updated: 2012-06-05

Category: Hardware and Environment, Vendor: Avaya

Description: Reports Small Form Factor (SFP/SFP+) transceiver inventory and optical power readings on Avaya/Nortel ERS.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BAY-STACK-SFF-MIB?

BAY-STACK-SFF-MIB is an Avaya (Bay Networks/Synoptics heritage) proprietary MIB reporting Digital Diagnostic Monitoring (DDM) for SFP transceivers on BayStack switches. Its table, keyed by ifIndex, records calibration type, RX power measurement, temperature/voltage/bias-current/TX-power values each with low/high alarm and warning thresholds. As a hardware-performance MIB it lets an administrator watch an SFP transceiver's optical/electrical health against vendor-defined alarm/warning thresholds on an Avaya BayStack switch. It is deployed on Avaya (Bay Networks) BayStack switches. Engineers can download the BAY-STACK-SFF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BAY-STACK-SFF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Avaya (Bay Networks) BayStack switches

Monitoring Examples

An administrator monitors bsDdiSfpTempValue against bsDdiSfpTempHighWarnThreshold to catch a degrading SFP transceiver before it triggers an alarm on an Avaya BayStack switch.

What Can Be Monitored

SFP transceiver DDM temperature/voltage/bias/power vs. thresholds

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SYNOPTICS-ROOT-MIB

bayStackMibs

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
bayStackDdiSfpMib	1.3.6.1.4.1.45.5.29			Avaya SFF MIB Copyright 2012 Avaya, Inc. All rights reserved. This Avaya SNMP Management Information Base Specification embodies Avaya's confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
bsDdiSfpNotifications	1.3.6.1.4.1.45.5.29.0
NTF bsDdiSfpTempAlarm	1.3.6.1.4.1.45.5.29.0.1			This notification is generated when a transceiver's temperature reaches an alarm level.
NTF bsDdiSfpTempWarn	1.3.6.1.4.1.45.5.29.0.2			This notification is generated when a transceiver's temperature reaches a warning level.
NTF bsDdiSfpTempNormal	1.3.6.1.4.1.45.5.29.0.3			This notification is generated when a transceiver's temperature reaches normal operating level. The notification is triggered after the transceiver's temperature has reached a warning or alarm level and then returns to normal level.
NTF bsDdiSfpVoltageAlarm	1.3.6.1.4.1.45.5.29.0.4			This notification is generated when a transceiver's voltage reaches an alarm level.
NTF bsDdiSfpVoltageWarn	1.3.6.1.4.1.45.5.29.0.5			This notification is generated when a transceiver's voltage reaches a warning level.
NTF bsDdiSfpVoltageNormal	1.3.6.1.4.1.45.5.29.0.6			This notification is generated when a transceiver's voltage reaches normal operating level. The notification is triggered after the transceiver's voltage has reached a warning or alarm level and then returns to normal level.
NTF bsDdiSfpBiasAlarm	1.3.6.1.4.1.45.5.29.0.7			This notification is generated when a transceiver's bias reaches an alarm level.
NTF bsDdiSfpBiasWarn	1.3.6.1.4.1.45.5.29.0.8			This notification is generated when a transceiver's bias reaches a warning level.
NTF bsDdiSfpBiasNormal	1.3.6.1.4.1.45.5.29.0.9			This notification is generated when a transceiver's bias reaches normal operating level. The notification is triggered after the transceiver's bias has reached a warning or alarm level and then returns to normal level.
NTF bsDdiSfpTxAlarm	1.3.6.1.4.1.45.5.29.0.10			This notification is generated when a transceiver's transmit power reaches an alarm level.
NTF bsDdiSfpTxWarn	1.3.6.1.4.1.45.5.29.0.11			This notification is generated when a transceiver's transmit power reaches a warning level.
NTF bsDdiSfpTxNormal	1.3.6.1.4.1.45.5.29.0.12			This notification is generated when a transceiver's transmit power reaches normal operating level. The notification is triggered after the transceiver's transmit power has reached a warning or alarm level and then returns to normal level.
NTF bsDdiSfpRxAlarm	1.3.6.1.4.1.45.5.29.0.13			This notification is generated when a transceiver's receive power reaches an alarm level.
NTF bsDdiSfpRxWarn	1.3.6.1.4.1.45.5.29.0.14			This notification is generated when a transceiver's receive power reaches a warning level.
NTF bsDdiSfpRxNormal	1.3.6.1.4.1.45.5.29.0.15			This notification is generated when a transceiver's receive power reaches normal operating level. The notification is triggered after the transceiver's receive power has reached a warning or alarm level and then returns to normal level.
bsDdiSfpObjects	1.3.6.1.4.1.45.5.29.1
bsDdiSfpTable	1.3.6.1.4.1.45.5.29.1.2		not-accessible	This table contains information about DDI SFPs. Entries will exist in this table only for DDI SFP ports.
bsDdiSfpEntry	1.3.6.1.4.1.45.5.29.1.2.1		not-accessible	SFF interface settings.
NUM bsDdiSfpIfIndex	1.3.6.1.4.1.45.5.29.1.2.1.1	InterfaceIndex	not-accessible	Identifies the ifIndex of the SFF port.
INT bsDdiSfpCalibration	1.3.6.1.4.1.45.5.29.1.2.1.2	INTEGER	read-only	This object indicates whether the actual values read from EEPROM internally within an implementation are already calibrated to the appropriate units (Volts, mA, dB, etc), or whether these values are first converted to appropriate units. The value external(2) indicates that the values as read from EEPROM must be converted. Note that this is only an indication of what happens internally within an implementation, and does not have any effect on the values of other columns in this table.
INT bsDdiSfpRxPowerMeasurement	1.3.6.1.4.1.45.5.29.1.2.1.3	INTEGER	read-only	This object indicates the measurement type used for the received power. A value of oma(1) indicates Optical Modulation Amplitude (OMA).
I32 bsDdiSfpTempValue	1.3.6.1.4.1.45.5.29.1.2.1.4	Integer32	read-only	The actual temperature value, measured in 1/10000 Celsius.
I32 bsDdiSfpTempLowAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.5	Integer32	read-only	The low alarm temperature threshold, measure in 1/10000 Celsius.
I32 bsDdiSfpTempLowWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.6	Integer32	read-only	The low warn temperature threshold, measure in 1/10000 Celsius.
I32 bsDdiSfpTempHighAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.7	Integer32	read-only	The high alarm temperature threshold, measure in 1/10000 Celsius.
I32 bsDdiSfpTempHighWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.8	Integer32	read-only	The high warn temperature threshold, measure in 1/10000 Celsius.
I32 bsDdiSfpVoltageValue	1.3.6.1.4.1.45.5.29.1.2.1.9	Integer32	read-only	The actual voltage value, measured in 1/10000 volts.
I32 bsDdiSfpVoltageLowAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.10	Integer32	read-only	The low alarm voltage threshold, measured in 1/10000 volts.
I32 bsDdiSfpVoltageLowWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.11	Integer32	read-only	The low warn voltage threshold, measured in 1/10000 volts.
I32 bsDdiSfpVoltageHighAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.12	Integer32	read-only	The high alarm voltage threshold, measured in 1/10000 volts.
I32 bsDdiSfpVoltageHighWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.13	Integer32	read-only	The high warn voltage threshold, measured in 1/10000 volts.
I32 bsDdiSfpBiasValue	1.3.6.1.4.1.45.5.29.1.2.1.14	Integer32	read-only	The actual bias value, measured in 1/10000 mA.
I32 bsDdiSfpBiasLowAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.15	Integer32	read-only	The low alarm bias threshold, measured in 1/10000 mA.
I32 bsDdiSfpBiasLowWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.16	Integer32	read-only	The low warn bias threshold, measured in 1/10000 mA.
I32 bsDdiSfpBiasHighAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.17	Integer32	read-only	The high alarm bias threshold, measured in 1/10000 mA.
I32 bsDdiSfpBiasHighWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.18	Integer32	read-only	The high warn bias threshold, measured in 1/10000 mA.
I32 bsDdiSfpTxPowerValue	1.3.6.1.4.1.45.5.29.1.2.1.19	Integer32	read-only	The actual transmit power value, measured in 1/10000 dBm.
I32 bsDdiSfpTxPowerLowAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.20	Integer32	read-only	The low alarm transmit power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpTxPowerLowWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.21	Integer32	read-only	The low warn transmit power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpTxPowerHighAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.22	Integer32	read-only	The high alarm transmit power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpTxPowerHighWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.23	Integer32	read-only	The high warn transmit power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpRxPowerValue	1.3.6.1.4.1.45.5.29.1.2.1.24	Integer32	read-only	The actual receive power value, measured in 1/10000 dBm.
I32 bsDdiSfpRxPowerLowAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.25	Integer32	read-only	The low alarm receive power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpRxPowerLowWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.26	Integer32	read-only	The low warn receive power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpRxPowerHighAlarmThreshold	1.3.6.1.4.1.45.5.29.1.2.1.27	Integer32	read-only	The high alarm receive power threshold, measured in 1/10000 dBm.
I32 bsDdiSfpRxPowerHighWarnThreshold	1.3.6.1.4.1.45.5.29.1.2.1.28	Integer32	read-only	The high warn receive power threshold, measured in 1/10000 dBm.

RFC description

Manages SFF optical transceiver monitoring and thresholds for Avaya switches.

Start monitoring Avaya/Nortel BayStack Ethernet Routing Switch (ERS) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BAY-STACK-SFF-MIB

What Is BAY-STACK-SFF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description