BASIS-SERIAL-MIB :: serialPortEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBASIS-SERIAL-MIBserialPortEnable

serialPortEnable

Module: BASIS-SERIAL-MIB

OID (symbolic): BASIS-SERIAL-MIB::serialPortEnable

OID (numeric): 1.3.6.1.4.1.351.110.4.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used for enabling/disabling serial port.

What is serialPortEnable?

Controls whether a serial port is administratively enabled or disabled, allowing operators to activate or deactivate individual serial interfaces as needed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.1.1.1.3
snmpwalk -v2c -c public <target> BASIS-SERIAL-MIB::serialPortEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.1.1.1.3.1
snmpget -v2c -c public <target> BASIS-SERIAL-MIB::serialPortEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.1.1.1.3.1 i <value>

Start monitoring Cisco MGX 8850/8250/8220 ATM edge switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BASIS-SERIAL-MIB::serialPortEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8850/8250/8220 ATM edge switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.1serialInterfaceBASIS-SERIAL-MIB
1.3.6.1.4.1.351.110.4.1.1serialInterfaceTableBASIS-SERIAL-MIB
1.3.6.1.4.1.351.110.4.1.1.1serialInterfaceEntryBASIS-SERIAL-MIB
1.3.6.1.4.1.351.110.4.1.1.1.3serialPortEnableBASIS-SERIAL-MIB