Application-Monitoring-MIB

All MIBs › Application-Monitoring-MIB

Category: Network Monitoring (RMON)

Description: Generic application availability and performance monitoring including response time and uptime.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Application-Monitoring-MIB?

Application-Monitoring-MIB provides generic application availability and performance monitoring, originating from Siemens Nixdorf ("sni" enterprise prefix) and organized under sniProductMibs/sniAppMon. It exposes subsystem-level inventory and state data — each monitored software subsystem's name, version, running state, and active task count — plus a related BCAM (Basic Communication Access Method) application table for tracking individual applications. It is explicitly a software-status monitoring MIB: appMonSubsysState reveals whether a subsystem is running/stopped/faulted, appMonSubsysTasks indicates process/task load, and appMonSubsysVersion supports software-version auditing across a fleet, directly analogous to process/service status and version monitoring on a host. It depends on the Siemens Nixdorf ("sni") enterprise OID tree and is a vendor-neutral-style generic monitoring schema layered under that vendor root. It is typically deployed on Siemens Nixdorf/BCAM-based host and application-server environments to give an NMS visibility into application/subsystem health without vendor-specific instrumentation. Engineers can download the Application-Monitoring-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Application-Monitoring-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens Nixdorf (BCAM-based) host or application server
vendor-neutral generic application monitoring, applicable to any monitored subsystem/application

Monitoring Examples

An admin would poll appMonSubsysTable/appMonSubsysEntry, keyed by appMonSubsysIndex, to check each subsystem's appMonSubsysState and appMonSubsysTasks — a subsystem showing a stopped/error state or an unexpectedly low task count would indicate an application outage. appMonSubsysVersion lets the operator audit software versions across subsystems during a rollout. appMonBcamApplTable/appMonBcamApplEntry, keyed by appMonBcamApplIndex, gives a parallel view into individual BCAM-managed applications' presence and status.

What Can Be Monitored

subsystem name and version
subsystem running state
subsystem task/process count
BCAM application presence/index

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
OID appMonAckOID	1.3.6.1.4.1.231.2.23.20.1.6	OBJECT IDENTIFIER	not-accessible
appMonBcamApplEntry	1.3.6.1.4.1.231.2.23.2.2.1		not-accessible	An entry in the table
INT appMonBcamApplIndex	1.3.6.1.4.1.231.2.23.2.2.1.1	INTEGER	read-only	A unique value for each entry, its value ranges between 1 and the value of appMonBcamApplTabNum
STR appMonBcamApplMonJV	1.3.6.1.4.1.231.2.23.2.2.1.5	DisplayString	read-only	Name of the MONJV monitoring the application
STR appMonBcamApplName	1.3.6.1.4.1.231.2.23.2.2.1.2	DisplayString	read-only	The name of the BCAM application
INT appMonBcamApplState	1.3.6.1.4.1.231.2.23.2.2.1.4	INTEGER	read-only	The current state of the BCAM application
appMonBcamApplTable	1.3.6.1.4.1.231.2.23.2.2		not-accessible	The BCAM Application information table
INT appMonBcamApplTabNum	1.3.6.1.4.1.231.2.23.2.1	INTEGER	read-only	The number of entries in the table appMonTable
STR appMonBcamApplVersion	1.3.6.1.4.1.231.2.23.2.2.1.3	DisplayString	read-only	The current version of the BCAM application
STR appMonConfFile	1.3.6.1.4.1.231.2.23.5.2	DisplayString	read-write	Pathname of the configuration file
appMonConfirm	1.3.6.1.4.1.231.2.23.20.3
NTF appMonConfirmTrap	1.3.6.1.4.1.231.2.23.20.3.0.999			General application trap, the trap must be confirmed
appMonDcamApplEntry	1.3.6.1.4.1.231.2.23.6.2.1		not-accessible	An entry in the table
STR appMonDcamApplHost	1.3.6.1.4.1.231.2.23.6.2.1.3	DisplayString	read-only	The host on which the DCAM application is running
INT appMonDcamApplIndex	1.3.6.1.4.1.231.2.23.6.2.1.1	INTEGER	read-only	A unique value for each entry, its value ranges between 1 and the value of appMonDcamApplTabNum
STR appMonDcamApplName	1.3.6.1.4.1.231.2.23.6.2.1.2	DisplayString	read-only	The name of the DCAM application
INT appMonDcamApplState	1.3.6.1.4.1.231.2.23.6.2.1.4	INTEGER	read-only	The current state of the DCAM application
appMonDcamApplTable	1.3.6.1.4.1.231.2.23.6.2		not-accessible	The DCAM Application information table
INT appMonDcamApplTabNum	1.3.6.1.4.1.231.2.23.6.1	INTEGER	read-only	The number of entries in the table appMonDcamApplTable
STR appMonDevice	1.3.6.1.4.1.231.2.23.20.1.2	DisplayString	not-accessible
appMonGeneric	1.3.6.1.4.1.231.2.23.20.2
NTF appMonGenTrap	1.3.6.1.4.1.231.2.23.20.2.0.999			General application trap
STR appMonJVAppl	1.3.6.1.4.1.231.2.23.8.2.1.2	DisplayString	read-only	The application name
appMonJVEntry	1.3.6.1.4.1.231.2.23.8.2.1		not-accessible	An entry in the table
STR appMonJVName	1.3.6.1.4.1.231.2.23.8.2.1.1	DisplayString	read-only	Name of the JV
STR appMonJVPattern	1.3.6.1.4.1.231.2.23.8.2.1.4	DisplayString	read-only	Value pattern for which a trap will be sent
appMonJVTable	1.3.6.1.4.1.231.2.23.8.2		not-accessible	The BCAM Application information table
INT appMonJVTabNum	1.3.6.1.4.1.231.2.23.8.1	INTEGER	read-only	The number of entries in the table appMonJVTable
STR appMonJVValue	1.3.6.1.4.1.231.2.23.8.2.1.3	DisplayString	read-only	The current value of the JV
STR appMonLogfAppl	1.3.6.1.4.1.231.2.23.7.2.1.2	DisplayString	read-only	The application name
appMonLogfEntry	1.3.6.1.4.1.231.2.23.7.2.1		not-accessible	An entry in the table
appMonLogfiles	1.3.6.1.4.1.231.2.23.7
STR appMonLogfName	1.3.6.1.4.1.231.2.23.7.2.1.1	DisplayString	read-only	Pathname of the logfile
STR appMonLogfPattern	1.3.6.1.4.1.231.2.23.7.2.1.4	DisplayString	read-only	Pattern for which a trap is generated
INT appMonLogfState	1.3.6.1.4.1.231.2.23.7.2.1.3	INTEGER	read-write	The current monitoring state of the logfile is either active or deactive. For write operation either start-begin, start-new, start-end or deactive has to be specified
appMonLogfTable	1.3.6.1.4.1.231.2.23.7.2		not-accessible	The Logfile table
INT appMonLogfTabNum	1.3.6.1.4.1.231.2.23.7.1	INTEGER	read-only	The number of entries in the table appMonLogfTable
STR appMonMsg	1.3.6.1.4.1.231.2.23.20.1.3	DisplayString	not-accessible
STR appMonObjectBcamAppl	1.3.6.1.4.1.231.2.23.9.2.1.3	DisplayString	read-only	Name of the BCAM applications belonging to the object
STR appMonObjectDcamAppl	1.3.6.1.4.1.231.2.23.9.2.1.5	DisplayString	read-only	Name of the DCAM applications belonging to the object
appMonObjectEntry	1.3.6.1.4.1.231.2.23.9.2.1		not-accessible	An entry in the table
INT appMonObjectIndex	1.3.6.1.4.1.231.2.23.9.2.1.1	INTEGER	read-only	A unique value for each entry, its value ranges between 1 and the value of appMonObjectTabNum
STR appMonObjectJV	1.3.6.1.4.1.231.2.23.9.2.1.8	DisplayString	read-only	Name of the JVs belonging to the object
STR appMonObjectLogfile	1.3.6.1.4.1.231.2.23.9.2.1.7	DisplayString	read-only	Name of the logfiles belonging to the object
STR appMonObjectName	1.3.6.1.4.1.231.2.23.9.2.1.2	DisplayString	read-only	The name of the object
INT appMonObjectsTabNum	1.3.6.1.4.1.231.2.23.9.1	INTEGER	read-only	The number of entries in the table appMonObjectTable
STR appMonObjectSub	1.3.6.1.4.1.231.2.23.9.2.1.6	DisplayString	read-only	Name of the subsystems belonging to the object
appMonObjectTable	1.3.6.1.4.1.231.2.23.9.2		not-accessible	The Object table
STR appMonObjectUserAppl	1.3.6.1.4.1.231.2.23.9.2.1.4	DisplayString	read-only	Name of the user applications belonging to the object
STR appMonSource	1.3.6.1.4.1.231.2.23.20.1.1	DisplayString	not-accessible
appMonSubsysEntry	1.3.6.1.4.1.231.2.23.1.2.1		not-accessible	An entry in the table
INT appMonSubsysIndex	1.3.6.1.4.1.231.2.23.1.2.1.1	INTEGER	read-only	A unique value for each entry, its value ranges between 1 and the value of appMonSubsysTabNum
STR appMonSubsysName	1.3.6.1.4.1.231.2.23.1.2.1.2	DisplayString	read-only	The name of the subsystem
INT appMonSubsysState	1.3.6.1.4.1.231.2.23.1.2.1.4	INTEGER	read-only	The current state of the subsystem
appMonSubsysTable	1.3.6.1.4.1.231.2.23.1.2		not-accessible	The Subsystem information table
INT appMonSubsysTabNum	1.3.6.1.4.1.231.2.23.1.1	INTEGER	read-only	The number of entries in the table appMonSubsysTable
INT appMonSubsysTasks	1.3.6.1.4.1.231.2.23.1.2.1.5	INTEGER	read-only	Number of tasks connected to the subsystem
STR appMonSubsysVersion	1.3.6.1.4.1.231.2.23.1.2.1.3	DisplayString	read-only	The current version of the subsystem
appMonTrapData	1.3.6.1.4.1.231.2.23.20.1
INT appMonTrapFormat	1.3.6.1.4.1.231.2.23.5.3	INTEGER	read-write	Format of trap
appMonTraps	1.3.6.1.4.1.231.2.23.20
appMonUserApplEntry	1.3.6.1.4.1.231.2.23.3.2.1		not-accessible	An entry in the table
INT appMonUserApplIndex	1.3.6.1.4.1.231.2.23.3.2.1.1	INTEGER	read-only	A unique value for each entry, its value ranges between 1 and the value of appMonUserApplTabNum
STR appMonUserApplMonJV	1.3.6.1.4.1.231.2.23.3.2.1.5	DisplayString	read-only	Name of the MONJV monitoring the application
STR appMonUserApplName	1.3.6.1.4.1.231.2.23.3.2.1.2	DisplayString	read-only	The name of the User application
INT appMonUserApplState	1.3.6.1.4.1.231.2.23.3.2.1.4	INTEGER	read-only	The current state of the User application
appMonUserApplTable	1.3.6.1.4.1.231.2.23.3.2		not-accessible	The User Application information table
INT appMonUserApplTabNum	1.3.6.1.4.1.231.2.23.3.1	INTEGER	read-only	The number of entries in the table appMonTable
STR appMonUserApplVersion	1.3.6.1.4.1.231.2.23.3.2.1.3	DisplayString	read-only	The current version of the User application
STR appMonVersion	1.3.6.1.4.1.231.2.23.5.1	DisplayString	read-only	Version of application monitor
INT appMonWeight	1.3.6.1.4.1.231.2.23.20.1.4	INTEGER	not-accessible
sni	1.3.6.1.4.1.231
sniAppMon	1.3.6.1.4.1.231.2.23
sniAppMonBcamAppl	1.3.6.1.4.1.231.2.23.2
sniAppMonDcamAppl	1.3.6.1.4.1.231.2.23.6
sniAppMonGlobalData	1.3.6.1.4.1.231.2.23.5
sniAppMonJVs	1.3.6.1.4.1.231.2.23.8
sniAppMonObjects	1.3.6.1.4.1.231.2.23.9
sniAppMonSubSystems	1.3.6.1.4.1.231.2.23.1
sniAppMonUserAppl	1.3.6.1.4.1.231.2.23.3
sniProductMibs	1.3.6.1.4.1.231.2

RFC description

Monitors BS2000 mainframe applications with support for subsystems, user applications, DCAM applications, and event logging.

Start monitoring Siemens Nixdorf (BCAM) hosts/application servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Application-Monitoring-MIB

What Is Application-Monitoring-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description