AWAMP-MIB

All MIBs › AWAMP-MIB

Organization: Aruba Networks, Inc.

Last Updated: 2011-12-20

Category: Vendor: Aruba, Wireless and WLAN

Description: Manages Aruba Networks wireless access management platform, providing AP status, client association, and RF statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AWAMP-MIB?

AWAMP-MIB is the enterprise MIB for Aruba Networks' AirWave wireless network management platform, used to monitor access points and wireless infrastructure across a WLAN deployment. It exposes AP identity and grouping data, Ethernet MAC/IP addressing, hardware manufacturer/model/firmware details, the SNMP community string used for polling, and integration objects for HP OpenView network management. Administrators rely on it to check hardware and software status of managed access points -- confirming AP firmware version, model/manufacturer identity, and IP reachability to detect misconfigured, outdated, or offline APs. It sits under the enterprises.airwave branch and works alongside standard IEEE 802.11 MIB objects rather than duplicating them. It is typically deployed in enterprise and campus WLAN environments where AirWave centrally manages multi-vendor access points. Engineers can download the AWAMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AWAMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aruba Networks wireless access points
AirWave management platform
enterprise WLAN infrastructure

Monitoring Examples

An admin polls awampApName, awampAPIP, and awampAPEthMAC to inventory access points registered under a given awampGroupName, and checks awampAPFirmware to flag APs running outdated firmware that need an upgrade. The awampROCommString object reveals which read-only community string AirWave uses to poll each AP, useful for diagnosing failed SNMP polls. HP OpenView integration objects like awampHPOVHostName and awampHPOVIP1 let an admin confirm an AP's registration in a linked HPOV network management system.

What Can Be Monitored

AP identity and group membership
AP MAC and IP address
AP manufacturer/model
AP firmware version
SNMP community string used for polling
HP OpenView integration status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
airwave	1.3.6.1.4.1.12028
awamp	1.3.6.1.4.1.12028.4			The MIB module for AirWave entities . iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).airwave(12028).awamp(4)
awampConformance	1.3.6.1.4.1.12028.4.2
awampCompliances	1.3.6.1.4.1.12028.4.2.1
awampCompliance	1.3.6.1.4.1.12028.4.2.1.1			The compliance statement for the AirWave AMP.
awampGroups	1.3.6.1.4.1.12028.4.2.2
awampInfoGroup	1.3.6.1.4.1.12028.4.2.2.1			The group of objects providing AMP information.
awampEventGroup	1.3.6.1.4.1.12028.4.2.2.2			The group of objects providing AMP events.
awampNotificationGroup	1.3.6.1.4.1.12028.4.2.2.3			The group of objects providing AMP notifications.
awampSystem	1.3.6.1.4.1.12028.4.10
awamp802dot11	1.3.6.1.4.1.12028.4.11
awampEvent	1.3.6.1.4.1.12028.4.15
awampEventPrefix	1.3.6.1.4.1.12028.4.15.0
NTF tooManyDevAssocAMP	1.3.6.1.4.1.12028.4.15.0.1			This trap is sent when too many devices are simultaneously associated with AMP for a period of time.
NTF tooManyDevAssocGroup	1.3.6.1.4.1.12028.4.15.0.2			This trap is sent when too many devices are simultaneously associated with a Group for a period of time.
NTF tooManyDevAssocAp	1.3.6.1.4.1.12028.4.15.0.3			This trap is sent when too many devices are associated simultaneously associated with an AP for a period of time.
NTF toomuchBWAMP	1.3.6.1.4.1.12028.4.15.0.4			This trap is sent when there is too much BW being used on the WLAN for a period of time.
NTF toomuchBWGroup	1.3.6.1.4.1.12028.4.15.0.5			This trap is sent when there is too much BW being used by a Group for a period of time.
NTF toomuchBWAP	1.3.6.1.4.1.12028.4.15.0.6			This trap is sent when there is too much BW being used on an AP for a period of time.
NTF toomuchBWClient	1.3.6.1.4.1.12028.4.15.0.7			This trap is sent when there is too much BW being used by a Client for a period of time.
NTF toomanyRoamsClient	1.3.6.1.4.1.12028.4.15.0.8			This trap is sent when Client roams too frequently for a period of time.
NTF poorSignalAP	1.3.6.1.4.1.12028.4.15.0.9			This trap is sent when an AP has poor Signal quality for a period of time.
NTF nonAMPAPChange	1.3.6.1.4.1.12028.4.15.0.10			This trap is sent when an AP Changes configuration without the AMP's knowledge
NTF unauthenticatedClient	1.3.6.1.4.1.12028.4.15.0.11			This trap is sent when Client is associated with WLAN for a period of time without authenticating.
NTF rogueAPDetected	1.3.6.1.4.1.12028.4.15.0.12			This trap is sent when the AMP classifies a Rogue AP.
NTF downAP	1.3.6.1.4.1.12028.4.15.0.13			This trap is sent when the AP is down (for instance, a missed SNMP Ping or SNMP Get).
NTF discoveredAP	1.3.6.1.4.1.12028.4.15.0.14			This trap is sent when AP is discovered by AMP. Note that this only applies to AP discovery, not authorization. (A Config trap is sent when the AP is authorized.
NTF upAP	1.3.6.1.4.1.12028.4.15.0.15			This trap is sent when AP is detected as UP after being marked DOWN by the AMP.
NTF downRadio	1.3.6.1.4.1.12028.4.15.0.16			This trap is sent when the radio of an AP is not operating.
NTF clientAssociate	1.3.6.1.4.1.12028.4.15.0.17			This trap is sent when a watched client mac address associates to an AP.
NTF authIssueClient	1.3.6.1.4.1.12028.4.15.0.18			This trap is sent when a client experiences too many authentication failures.
NTF authIssueAP	1.3.6.1.4.1.12028.4.15.0.19			This trap is sent when an AP experiences too many authentication failures.
NTF authIssueAMP	1.3.6.1.4.1.12028.4.15.0.20			This trap is sent when AMP detects too many authentication failures.
NTF idsEventAP	1.3.6.1.4.1.12028.4.15.0.21			This trap is sent when AMP receives too many IDS events from an AP.
NTF rfidTagNotHeard	1.3.6.1.4.1.12028.4.15.0.22			This trap is sent when an RFID tag is not heard for a certain period of time.
NTF dot11Counters	1.3.6.1.4.1.12028.4.15.0.23			This trap is sent when a Dot11 counter trigger fires.
NTF qosCounters	1.3.6.1.4.1.12028.4.15.0.24			This trap is sent when a QOS counter trigger fires.
NTF deviceResources	1.3.6.1.4.1.12028.4.15.0.25			This trap is sent when a Device Resources trigger fires.
NTF diskUsage	1.3.6.1.4.1.12028.4.15.0.26			This trap is sent when a Disk Usage trigger fires.
NTF managedAmpDown	1.3.6.1.4.1.12028.4.15.0.27			This trap is sent when a Managed AMP Down trigger fires.
NTF watchedAmpDown	1.3.6.1.4.1.12028.4.15.0.28			This trap is sent when a Watched AMP Down trigger fires.
NTF interfaceBandwidth	1.3.6.1.4.1.12028.4.15.0.29			This trap is sent when an Interface Bandwidth trigger fires.
NTF radioUtilization	1.3.6.1.4.1.12028.4.15.0.30			This trap is sent when a Radio Utilization trigger fires.
NTF deviceEvent	1.3.6.1.4.1.12028.4.15.0.31			This trap is sent when a Device Event trigger fires.
NTF rogueAPDetectedDetail	1.3.6.1.4.1.12028.4.15.0.32			This trap is sent when the AMP classifies a Rogue AP. It includes more details: SSID, Manufacturer, Wired (boolean), Wireless (boolean), Classifying Rule Name, Last Discovering Agent, and AP Folder Name.
NTF ipv4LinkLocalAddresses	1.3.6.1.4.1.12028.4.15.0.33			This trap is sent when a IPv4 Link-Local Addresses trigger fires.
NTF vpnUserConnect	1.3.6.1.4.1.12028.4.15.0.34			This trap is sent when a new VPN user connects to a controller.
NTF clientOnRogueAP	1.3.6.1.4.1.12028.4.15.0.35			This trap is sent when a new client is discovered on Rogue AP. It includes more details: Client MAC, Rogue SSID and Rogue Device Name.
NTF vpnUserAssociate	1.3.6.1.4.1.12028.4.15.0.36			This trap is sent when a watched VPN username associates to a controller.
NTF toomuchBWVPNUser	1.3.6.1.4.1.12028.4.15.0.37			This trap is sent when a new VPN user connects to a controller.
NTF toomuchGoodputClient	1.3.6.1.4.1.12028.4.15.0.38			This trap is sent when there is too much Goodput being used by a Client for a period of time.
NTF speedClient	1.3.6.1.4.1.12028.4.15.0.39			This trap is sent when speed of a Client is below (or above) a threshold for a period of time.
NTF noisefloorRadio	1.3.6.1.4.1.12028.4.15.0.40			This trap is sent when noise floor of AP is below (or above) a threshold for a period of time.
NTF genericTrap	1.3.6.1.4.1.12028.4.15.0.50			This trap will catch things not defined.
NTF internalAMLUnknown	1.3.6.1.4.1.12028.4.15.0.51			This is an internal trap designed for AML running on the NNM. It allows the AML to dynamically accept severity codes from the AMP. Because HP OpenView statically defines these in trapd.conf per trap, we are creating an internal for each severity level to work around issue. Represents Blue and level 1
NTF internalAMLNormal	1.3.6.1.4.1.12028.4.15.0.52			This is an internal trap designed for AML running on the NNM. It allows the AML to dynamically accept severity codes from the AMP. Because HP OpenView statically defines these in trapd.conf per trap, we are creating an internal for each severity level to work around issue. Represents Green and level 2
NTF internalAMLMinor	1.3.6.1.4.1.12028.4.15.0.53			This is an internal trap designed for AML running on the NNM. It allows the AML to dynamically accept severity codes from the AMP. Because HP OpenView statically defines these in trapd.conf per trap, we are creating an internal for each severity level to work around issue. Represents yellow and level 3
NTF internalAMLCritcal	1.3.6.1.4.1.12028.4.15.0.54			This is an internal trap designed for AML running on the NNM. It allows the AML to dynamically accept severity codes from the AMP. Because HP OpenView statically defines these in trapd.conf per trap, we are creating an internal for each severity level to work around issue. Represents Red and level 4
NTF internalAMLWarning	1.3.6.1.4.1.12028.4.15.0.56			This is an internal trap designed for AML running on the NNM. It allows the AML to dynamically accept severity codes from the AMP. Because HP OpenView statically defines these in trapd.conf per trap, we are creating an internal for each severity level to work around issue. Represents Cyan and level 6
NTF internalAMLMajor	1.3.6.1.4.1.12028.4.15.0.57			This is an internal trap designed for AML running on the NNM. It allows the AML to dynamically accept severity codes from the AMP. Because HP OpenView statically defines these in trapd.conf per trap, we are creating an internal for each severity level to work around issue. Represents Orange and level 7
NTF uplinkDevice	1.3.6.1.4.1.12028.4.15.0.58			This trap is sent when the device uplink status is changed.
NTF upRadio	1.3.6.1.4.1.12028.4.15.0.59			This trap is sent when the radio of an AP is detected as UP after being marked DOWN.
NTF configAlert	1.3.6.1.4.1.12028.4.15.0.200			This trap is sent every time a new device is discovered and authenticated on the AMP. Also sent upon change to IP, Name, Firmware, Group Association.
awampEventObject	1.3.6.1.4.1.12028.4.15.1
I32 awampEventID	1.3.6.1.4.1.12028.4.15.1.101	Integer32	read-only	Random number AMP assigns to the event.
I32 awampEventSeverityCode	1.3.6.1.4.1.12028.4.15.1.102	Integer32	read-only	Level 1-6
STR awampEventDescription	1.3.6.1.4.1.12028.4.15.1.103	DisplayString	read-only	Concatenated String produced from AMP.
IP awampEventAPIPOld	1.3.6.1.4.1.12028.4.15.1.104	IpAddress	read-only	Old IP of the AP when AMP changes and sends trap to HPOV.
STR awampEventAPMngURL	1.3.6.1.4.1.12028.4.15.1.105	DisplayString	read-only	URL to manage AP on AMP from HPOV.
STR awampEventAPMonURL	1.3.6.1.4.1.12028.4.15.1.106	DisplayString	read-only	URL to monitor AP on AMP from HPOV.
STR awampEventGroupMngURL	1.3.6.1.4.1.12028.4.15.1.107	DisplayString	read-only	URL to manage Group on AMP from HPOV.
STR awampEventGroupMonURL	1.3.6.1.4.1.12028.4.15.1.108	DisplayString	read-only	URL to monitor Group on AMP from HPOV.
STR awampEventAPICON	1.3.6.1.4.1.12028.4.15.1.109	DisplayString	read-only	Name of ICON to display on HPOV screen
STR awampEventRogueSSID	1.3.6.1.4.1.12028.4.15.1.110	DisplayString	read-only	SSID of detected Rogue AP.
STR awampEventRogueLANManufacturer	1.3.6.1.4.1.12028.4.15.1.111	DisplayString	read-only	Manufacturer of LAN of detected Rogue AP.
STR awampEventRogueRadioManufacturer	1.3.6.1.4.1.12028.4.15.1.112	DisplayString	read-only	Manufacturer of radio detected Rogue AP.
T/F awampEventRogueIsWired	1.3.6.1.4.1.12028.4.15.1.113	TruthValue	read-only	Detected Rogue AP was discovered on the wired network.
T/F awampEventRogueIsWireless	1.3.6.1.4.1.12028.4.15.1.114	TruthValue	read-only	Detected Rogue AP was discovered on the wireless network.
STR awampEventRogueClassifyingRule	1.3.6.1.4.1.12028.4.15.1.115	DisplayString	read-only	Rule used to classify detected rogue AP.
STR awampEventRogueDiscoveringAgent	1.3.6.1.4.1.12028.4.15.1.116	DisplayString	read-only	The discovering agent that last detected the rogue AP.
STR awampEventRogueDiscoveringAgentFolder	1.3.6.1.4.1.12028.4.15.1.117	DisplayString	read-only	The folder name of the discovering agent that last detected the rogue AP.
STR awampEventRogueClientMac	1.3.6.1.4.1.12028.4.15.1.118	DisplayString	read-only	MAC Address of client connected to rogue ap.
STR awampEventRogueName	1.3.6.1.4.1.12028.4.15.1.119	DisplayString	read-only	SSID to which the client is connected on rogue ap.
STR awampApName	1.3.6.1.4.1.12028.4.101	DisplayString	read-only	The AP Name
STR awampGroupName	1.3.6.1.4.1.12028.4.102	DisplayString	read-only	The Group Name
MAC awampAPEthMAC	1.3.6.1.4.1.12028.4.103	MacAddress	read-only	IEEE Unique Identifier
IP awampAPIP	1.3.6.1.4.1.12028.4.104	IpAddress	read-only	IP Address of the AP (Eth0)
STR awampAPMFG	1.3.6.1.4.1.12028.4.105	DisplayString	read-only	AP MFG
STR awampAPModel	1.3.6.1.4.1.12028.4.106	DisplayString	read-only	AP Model
STR awampAPFirmware	1.3.6.1.4.1.12028.4.107	DisplayString	read-only	AP Firmware
STR awampROCommString	1.3.6.1.4.1.12028.4.108	DisplayString	read-only	Read Only Community String (not currently used)
STR awampHPOVHostName	1.3.6.1.4.1.12028.4.109	DisplayString	read-only	Hostname of the AP
STR awampHPOVSYSID	1.3.6.1.4.1.12028.4.110	DisplayString	read-only	Hp OpenView Object Id
MAC awampHPOVMAC1	1.3.6.1.4.1.12028.4.111	MacAddress	read-only	First Radio MAC on AP
IP awampHPOVIP1	1.3.6.1.4.1.12028.4.112	IpAddress	read-only	First Radio IP AP
MAC awampHPOVMAC2	1.3.6.1.4.1.12028.4.113	MacAddress	read-only	Second Radio MAC on AP
IP awampHPOVIP2	1.3.6.1.4.1.12028.4.114	IpAddress	read-only	Second Radio IP AP
STR awampHPOVsysName	1.3.6.1.4.1.12028.4.115	DisplayString	read-only	Hostname of the AP
STR awampHPOVsysDescr	1.3.6.1.4.1.12028.4.116	DisplayString	read-only	Hostname of the AP

RFC description

Aruba AirWave management platform statistics for wireless networks, rogue AP detection, and 802.11 monitoring.

Start monitoring Aruba Networks AirWave wireless network management platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AWAMP-MIB

What Is AWAMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description