All MIBs › ATM-FORUM-ILMI40-MIB › atmfAddressOrgScope
atmfAddressOrgScope
Module: ATM-FORUM-ILMI40-MIB
OID (symbolic): ATM-FORUM-ILMI40-MIB::atmfAddressOrgScope
OID (numeric): 1.3.6.1.4.1.353.2.6.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. If the user-side IME does not specify a value for the atmfAddressOrgScope object, the network shall set the value of this object to localNetwork(1), if the registered address is an ATM group address, or to global(15), if the registered address is an individual address. Refer to Annex 6.0 of ATM Forum UNI Signalling 4.0 for guidelines regarding the use of organizational scopes.
This organization hierarchy may be mapped to ATM network's routing hierarchy such as PNNI's routing level and the mapping shall be configurable in nodes. Use of this object in a public network is for further study. The default values for organizational scope are localNetwork(1) for ATM group addresses, and global(15) for individual addresses.
What is atmfAddressOrgScope?
A writable object specifying the organizational scope within which a registered ATM address's information may be distributed, limiting how widely that address is advertised.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.6.1.1.4 snmpwalk -v2c -c public <target> ATM-FORUM-ILMI40-MIB::atmfAddressOrgScope
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.6.1.1.4.1 snmpget -v2c -c public <target> ATM-FORUM-ILMI40-MIB::atmfAddressOrgScope.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.353.2.6.1.1.4.1 i <value>
Start monitoring ATM-capable switches/routers (ILMI 4.0) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-ILMI40-MIB::atmfAddressOrgScope OID value, configure state conditions and alerts, and monitor any ATM-capable switches/routers (ILMI 4.0) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.353.2.6.1 | atmfAddressTable | ATM-FORUM-ADDR-REG |
| 1.3.6.1.4.1.353.2.6.1.1 | atmfAddressEntry | ATM-FORUM-ADDR-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2 | atmForumUni | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2.6 | atmfAddressGroup | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2.6.1.1.4 | atmfAddressOrgScope | ATM-FORUM-ILMI40-MIB |