AT-GS950-8-MIB :: sysLaPortActorResetAdminState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAT-GS950-8-MIBsysLaPortActorResetAdminState

sysLaPortActorResetAdminState

Module: AT-GS950-8-MIB

OID (symbolic): AT-GS950-8-MIB::sysLaPortActorResetAdminState

OID (numeric): 1.3.6.1.4.1.207.1.4.165.63.3.1.1.4

Node type: OBJECT-TYPE

Type: LacpState

Access: read-write

Description: A string of 8 bits,corresponding to the administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout),the third bit corresponds to bit 2 (Aggregation),the fourth bit corresponds to bit 3 (Synchronization),the fifth bit corresponds to bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted),and the eighth bit corresponds to bit 7 (Expired). This object allows the RESET of the values of Actor LACP_Activity, LACP_Timeout and Aggregation. Get operation on this object returns the current Port State of the Actor

What is sysLaPortActorResetAdminState?

Holds an 8-bit mask representing the administrative state flags the local (actor) side advertises in LACP data units (LACPDUs), including bits for LACP activity, timeout, aggregation, and synchronization. Configuring these bits controls how the local port negotiates aggregation parameters with its LACP peer.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.1.4.165.63.3.1.1.4
snmpwalk -v2c -c public <target> AT-GS950-8-MIB::sysLaPortActorResetAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.1.4.165.63.3.1.1.4.1
snmpget -v2c -c public <target> AT-GS950-8-MIB::sysLaPortActorResetAdminState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.207.1.4.165.63.3.1.1.4.1 s <value>

Start monitoring Allied Telesis AT-GS950 switch series with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-GS950-8-MIB::sysLaPortActorResetAdminState OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-GS950 switch series from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.207alliedTelesynAT-RG600-MIB
1.3.6.1.4.1.207.1productsAT-SMI-MIB
1.3.6.1.4.1.207.1.4swhubAtiEdgeSwitch-MIB
Numeric OIDNameModule
1.3.6.1.4.1.207.1.4.165at_GS9508v2AT-GS950-8-MIB
1.3.6.1.4.1.207.1.4.165.63l2LaAT-GS950-8-MIB
1.3.6.1.4.1.207.1.4.165.63.3sysLaPortAT-GS950-8-MIB
1.3.6.1.4.1.207.1.4.165.63.3.1sysLaPortTableAT-GS950-8-MIB
1.3.6.1.4.1.207.1.4.165.63.3.1.1sysLaPortEntryAT-GS950-8-MIB
1.3.6.1.4.1.207.1.4.165.63.3.1.1.4sysLaPortActorResetAdminStateAT-GS950-8-MIB