All MIBs › AT-GS950-8-MIB › dot1dTpFdbStatus
dot1dTpFdbStatus
Module: AT-GS950-8-MIB
OID (symbolic): AT-GS950-8-MIB::dot1dTpFdbStatus
OID (numeric): 1.3.6.1.4.1.207.1.4.165.116.4.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this entry. The meanings of the values are:
other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded.
invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table.
learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used.
self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address.
mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
What is dot1dTpFdbStatus?
Reports the status of a MAC address entry in the bridge's forwarding database, indicating whether the entry was dynamically learned, statically configured, self-referencing the bridge, or in some other state. This helps distinguish permanent management entries from normal learned entries.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.1.4.165.116.4.2.1.3 snmpwalk -v2c -c public <target> AT-GS950-8-MIB::dot1dTpFdbStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.1.4.165.116.4.2.1.3.1 snmpget -v2c -c public <target> AT-GS950-8-MIB::dot1dTpFdbStatus.1
Start monitoring Allied Telesis AT-GS950 switch series with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-GS950-8-MIB::dot1dTpFdbStatus OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-GS950 switch series from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.1 | products | AT-SMI-MIB |
| 1.3.6.1.4.1.207.1.4 | swhub | AtiEdgeSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.1.4.165 | at_GS9508v2 | AT-GS950-8-MIB |
| 1.3.6.1.4.1.207.1.4.165.116 | l2Bridge | AT-GS950-8-MIB |
| 1.3.6.1.4.1.207.1.4.165.116.4 | dot1dTp | AT-GS950-8-MIB |
| 1.3.6.1.4.1.207.1.4.165.116.4.2 | dot1dTpFdbTable | AT-GS950-8-MIB |
| 1.3.6.1.4.1.207.1.4.165.116.4.2.1 | dot1dTpFdbEntry | AT-GS950-8-MIB |
| 1.3.6.1.4.1.207.1.4.165.116.4.2.1.3 | dot1dTpFdbStatus | AT-GS950-8-MIB |