All MIBs › AT-GS950-24-MIB › sysLaTraceOption
sysLaTraceOption
Module: AT-GS950-24-MIB
OID (symbolic): AT-GS950-24-MIB::sysLaTraceOption
OID (numeric): 1.3.6.1.4.1.207.1.4.167.63.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object is used to enable Trace Statements in Link Aggregation Module.
A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, rsysresents a particular level of Trace.
The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources excsyst Buffers 6 - All Failure Traces 7 - Buffer Traces
The remaining bits are unused. Combination of levels are also allowed.
For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed.
The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are set then user has to set the value 3.
What is sysLaTraceOption?
Controls the verbosity of diagnostic trace logging for the Link Aggregation module, using a 4-byte bitmask where each bit enables a specific trace level. This is primarily used for troubleshooting LACP behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.1.4.167.63.1.3 snmpwalk -v2c -c public <target> AT-GS950-24-MIB::sysLaTraceOption
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.1.4.167.63.1.3.1 snmpget -v2c -c public <target> AT-GS950-24-MIB::sysLaTraceOption.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.1.4.167.63.1.3.1 i <value>
Start monitoring Allied Telesis smart switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-GS950-24-MIB::sysLaTraceOption OID value, configure state conditions and alerts, and monitor any Allied Telesis smart switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.1 | products | AT-SMI-MIB |
| 1.3.6.1.4.1.207.1.4 | swhub | AtiEdgeSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.1.4.167 | at_GS95024v3 | AT-GS950-24-MIB |
| 1.3.6.1.4.1.207.1.4.167.63 | l2La | AT-GS950-24-MIB |
| 1.3.6.1.4.1.207.1.4.167.63.1 | sysLaSystem | AT-GS950-24-MIB |
| 1.3.6.1.4.1.207.1.4.167.63.1.3 | sysLaTraceOption | AT-GS950-24-MIB |