All MIBs › AT-GS950-16-MIB › sysSnoopSendQueryOnTopoChange
sysSnoopSendQueryOnTopoChange
Module: AT-GS950-16-MIB
OID (symbolic): AT-GS950-16-MIB::sysSnoopSendQueryOnTopoChange
OID (numeric): 1.3.6.1.4.1.207.1.4.166.105.2.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the spanning tree mode is RSTP, IGMP/MLD general queries will be sent on all the non router ports present in the switch.If the spanning tree mode is MSTP, IGMP/MLD general queries will be sent on all the non router ports of the VLAN mapped for the MSTP instance.When this object is set to 'enabled' ,the switch will generate general query messages
What is sysSnoopSendQueryOnTopoChange?
Configures the switch to automatically send IGMP/MLD general queries on all non-router ports when a Spanning Tree topology change is detected, helping to quickly refresh multicast group memberships after a topology shift. This is particularly useful in RSTP environments where topology changes can alter the active forwarding paths.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.1.4.166.105.2.2.1.13 snmpwalk -v2c -c public <target> AT-GS950-16-MIB::sysSnoopSendQueryOnTopoChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.1.4.166.105.2.2.1.13.1 snmpget -v2c -c public <target> AT-GS950-16-MIB::sysSnoopSendQueryOnTopoChange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.1.4.166.105.2.2.1.13.1 i <value>
Start monitoring Allied Telesis AT-GS950 switch series with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-GS950-16-MIB::sysSnoopSendQueryOnTopoChange OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-GS950 switch series from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.1 | products | AT-SMI-MIB |
| 1.3.6.1.4.1.207.1.4 | swhub | AtiEdgeSwitch-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.1.4.166 | at_GS95016v3 | AT-GS950-16-MIB |
| 1.3.6.1.4.1.207.1.4.166.105 | l2Snoop | AT-GS950-16-MIB |
| 1.3.6.1.4.1.207.1.4.166.105.2 | sysSnoopInst | AT-GS950-16-MIB |
| 1.3.6.1.4.1.207.1.4.166.105.2.2 | sysSnoopInstanceConfigTable | AT-GS950-16-MIB |
| 1.3.6.1.4.1.207.1.4.166.105.2.2.1 | sysSnoopInstanceConfigEntry | AT-GS950-16-MIB |
| 1.3.6.1.4.1.207.1.4.166.105.2.2.1.13 | sysSnoopSendQueryOnTopoChange | AT-GS950-16-MIB |