ASCEND-MIBOC3ATMNET-MIB

Description: Manages OC-3 ATM network interface configuration and performance on Ascend ATM equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

ASCEND-MIBOC3ATMNET-MIB is a proprietary Ascend module managing OC-3 ATM network interface configuration and performance on Ascend's optical ATM equipment. It exposes configuration for OC-3 optical/ATM framing along with performance counters covering optical signal quality and ATM cell statistics at the network (line-side) interface. For monitoring, it is used to track hardware status of the optical interface — loss of signal, framing errors, and degraded optical performance — which are early indicators of fiber, transceiver, or line-card faults. It parallels IETF SONET-MIB and ATM-MIB concepts but is implemented as its own Ascend-specific object tree. It is deployed on ATM switches and access concentrators using OC-3 (155 Mbps) optical trunks in carrier backbone or aggregation networks. Network engineers evaluating or troubleshooting this functionality can download the ASCEND-MIBOC3ATMNET-MIB file directly to load it into their MIB browser.

No sample_objects were provided for this module, so the scenario below is a general inference from its stated scope. An administrator would poll the OC-3 interface for loss-of-signal/framing-error counters and optical performance indicators, treating a rising error count as a sign of fiber degradation or a failing optical transceiver. This is typically monitored alongside lower-layer SONET/SDH path MIBs for full end-to-end optical path visibility.

Ascend vendor-private MIB for managing OC-3 ATM network interfaces and connections.