ARRIS-D5-WAN-POST-MIB

All MIBs › ARRIS-D5-WAN-POST-MIB

Organization: Arris International

Last Updated: 2006-02-22

Category: DOCSIS and Cable, Vendor: ARRIS

Description: ARRIS D5 video platform WAN port power-on self-test result and diagnostic management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-D5-WAN-POST-MIB?

ARRIS-D5-WAN-POST-MIB is a vendor-specific MIB from ARRIS for the D5 modular CMTS/video platform, focused narrowly on Power-On Self-Test (POST) results for the WAN interface card. It exposes the outcome and diagnostic detail of the self-test the WAN card runs at boot. Its entire purpose is hardware status monitoring: confirming whether the WAN card passed its startup diagnostics or is reporting a fault before it is placed into service, which helps catch a defective card early rather than after it causes a service-affecting outage. As an ARRIS enterprise-tree module it has no evident dependency on other standard MIBs beyond general SNMP conventions. It is deployed in cable/video head-ends running ARRIS D5 chassis-based platforms. Engineers can download the ARRIS-D5-WAN-POST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-D5-WAN-POST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS D5 modular CMTS/video platform WAN card

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be confirmed with certainty. Based on its stated purpose, it would expose a POST result/status object for the WAN card that an operator checks after a reboot or card insertion to confirm the card passed self-test rather than booting into a faulted or degraded state.

What Can Be Monitored

WAN card POST result
POST diagnostic status/error indication

Imported Objects

From ARRIS-MIB

arrisD5UEQam

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp

OIDs

OID symbolic	OID numeric	Type	Access	Description
d5WanPOSTMIB	1.3.6.1.4.1.4115.1.8.1.3			This MIB reports POST result on the Arris D5 WAN card
d5WanPOSTObjects	1.3.6.1.4.1.4115.1.8.1.3.1
d5WanPOSTTable	1.3.6.1.4.1.4115.1.8.1.3.1.1		not-accessible	This table contains a list of WAN POST tests and test-results.
d5WanPOSTEntry	1.3.6.1.4.1.4115.1.8.1.3.1.1.1		not-accessible	An entry for a single POST test and result.
U32 d5WanPOSTTestId	1.3.6.1.4.1.4115.1.8.1.3.1.1.1.1	Unsigned32	not-accessible	A unique identifier specifying a particular POST test.
STR d5WanPOSTTestDescr	1.3.6.1.4.1.4115.1.8.1.3.1.1.1.2	DisplayString	read-only	A textual description of the associated POST test.
D5W d5WanPOSTTestResult	1.3.6.1.4.1.4115.1.8.1.3.1.1.1.3	D5WanPOSTTestResult	read-only	Test result from boot-time test
STR d5WanPOSTTestResultDescr	1.3.6.1.4.1.4115.1.8.1.3.1.1.1.4	DisplayString	read-only	Optional textual description of the test result.
d5WanPOSTDiagnosticTable	1.3.6.1.4.1.4115.1.8.1.3.1.2		not-accessible	This table contains a list of the WAN POST tests that can be run after boot-time.
d5WanPOSTDiagnosticEntry	1.3.6.1.4.1.4115.1.8.1.3.1.2.1		not-accessible	An entry for a single POST test and result.
U32 d5WanPOSTDiagTestId	1.3.6.1.4.1.4115.1.8.1.3.1.2.1.1	Unsigned32	not-accessible	A unique identifier specifying a particular POST test.
TIM d5WanPOSTDiagLastTestTimeStamp	1.3.6.1.4.1.4115.1.8.1.3.1.2.1.2	TimeStamp	read-only	The value of sysUpTime when this test was last executed. Zero if not-applicable or if last executed at boot-time.
D5W d5WanPOSTDiagLastTestResult	1.3.6.1.4.1.4115.1.8.1.3.1.2.1.3	D5WanPOSTTestResult	read-only	Most recent test result
STR d5WanPOSTDiagLastTestResultDescr	1.3.6.1.4.1.4115.1.8.1.3.1.2.1.4	DisplayString	read-only	Optional textual description of the test result.
INT d5WanPOSTDiagExecute	1.3.6.1.4.1.4115.1.8.1.3.1.2.1.5	INTEGER	read-write	Control for starting/stopping a test and checking for test completion. Only a value of start or stop is allowed on write access. Only a value of idle or running is allowed on read access.
I32 d5WanPOSTDiagParam	1.3.6.1.4.1.4115.1.8.1.3.1.2.1.6	Integer32	read-write	Parameter passed to a test started by setting d5WanPOSTDiagExecute to start.

RFC description

Reports Power-On Self-Test (POST) results for the Arris D5 WAN card in cable modem equipment.

Start monitoring ARRIS D5 Universal Edge QAM (UEQ) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-D5-WAN-POST-MIB

What Is ARRIS-D5-WAN-POST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description