All MIBs › ANS-MLBAS-MIB
Category: Device Management
Description: ANS CO+RE multi-link broadband access server configuration and status management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ANS-MLBAS-MIB?
ANS-MLBAS-MIB is a vendor MIB from ANS/CO+RE for its Multi-Link Broadband Access Server (MLBAS) product line, used to configure and monitor radio node units in a point-to-multipoint wireless access system. It exposes a radio node table covering per-node security settings, bit-error-rate (BER) threshold, bandwidth limit, loop test mode/point, alarm level, and session sign-on/sign-off timestamps for access terminals (ATs). Its monitoring value spans both hardware and connection status - BER threshold and alarm level indicate radio link quality/fault conditions, while signed-on/signed-off timestamps for access terminals reveal subscriber connectivity status and session churn. There is no clear evidence of dependency on other standard MIBs from the provided data; it appears to be a self-contained proprietary radio access MIB. It's typically deployed on ANS/CO+RE multi-link broadband wireless access systems providing fixed wireless broadband service to multiple subscriber access terminals. Engineers can download the ANS-MLBAS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ANS-MLBAS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ANS/CO+RE Multi-Link Broadband Access Server (MLBAS) radio nodes and access terminals
Monitoring Examples
An admin polls mlbasRadioNodeTable/mlbasRadioNodeEntry by mlbasRnCUId to check mlbasRnCUBerThreshold and mlbasRnCUAlarmLevel, which flag degraded radio link quality or an active hardware alarm on that radio unit. mlbasRnCUSignedOnAts and mlbasRnCUSignedOffAts reveal which access terminals are currently connected versus recently disconnected, helping an admin spot a subscriber unit that repeatedly drops off the network; mlbasRnCUBwLimit confirms the configured bandwidth cap matches what's expected for that node.
What Can Be Monitored
- BER threshold
- alarm level
- bandwidth limit
- loop test mode/point
- signed-on/signed-off access terminals
This MIB depends on
Related MIBs
Imported Objects
From ANS-COMMON-MIB
| DateAndTime | |
| RowPointer | |
| RowStatus | |
| mlpmpR115 | OBJECT-IDENTITY |
From ANS-EQUIPMENT-MIB
| ansBoardPosition | OBJECT-TYPE |
| ansBoardSubrackIndex | OBJECT-TYPE |
| ansBoardSystemNodeIndex | OBJECT-TYPE |
| ansSlotPosition | OBJECT-TYPE |
| ansSlotSubrackIndex | OBJECT-TYPE |
| ansSlotSystemNodeIndex | OBJECT-TYPE |
From ANS-GS-MIB
| ansAccessUserPortIndex | OBJECT-TYPE |
| ansAccessUserPortPosition | OBJECT-TYPE |
| ansAccessUserPortSubrack | OBJECT-TYPE |
| ansAccessUserPortSystemNode | OBJECT-TYPE |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mlbas | 1.3.6.1.4.1.193.96.115.5 | |||
| mlbasAccessTerminal | 1.3.6.1.4.1.193.96.115.5.3 | |||
| mlbasAccessTerminalEntry | 1.3.6.1.4.1.193.96.115.5.3.1.1 | not-accessible | This entity represents a WBAS Access Terminal in the remote part of the access network located at a customer. Collection of link performance is also controlled via this entity. | |
| mlbasAccessTerminalSlot | 1.3.6.1.4.1.193.96.115.5.2 | |||
| mlbasAccessTerminalSlotEntry | 1.3.6.1.4.1.193.96.115.5.2.1.1 | not-accessible | This entity represents the relation between a Radio Node and an Access Terminal. | |
| mlbasAccessTerminalSlotTable | 1.3.6.1.4.1.193.96.115.5.2.1 | not-accessible | Access Terminal Slot table | |
| mlbasAccessTerminalTable | 1.3.6.1.4.1.193.96.115.5.3.1 | not-accessible | Access Terminal table | |
| INT mlbasAtCUAtmLoop | 1.3.6.1.4.1.193.96.115.5.3.1.1.3 | INTEGER | read-write | Controls ATM traffic loop |
| INT mlbasAtCUBerThreshold | 1.3.6.1.4.1.193.96.115.5.3.1.1.4 | INTEGER | read-write | Threshold for bit error rate alarms |
| STR mlbasAtCUHwIdModem | 1.3.6.1.4.1.193.96.115.5.3.1.1.9 | DisplayString | read-only | The hardware id of the modem |
| INT mlbasAtCUInvalid15MinPerf | 1.3.6.1.4.1.193.96.115.5.3.1.1.6 | INTEGER | read-only | Number of invalid 15 min. periods stored in CP |
| INT mlbasAtCUInvalid24HPerf | 1.3.6.1.4.1.193.96.115.5.3.1.1.8 | INTEGER | read-only | Number of invalid 24 hour periods stored in CP |
| INT mlbasAtCUPerformance | 1.3.6.1.4.1.193.96.115.5.3.1.1.1 | INTEGER | read-write | Current performance monitoring status |
| DAT mlbasAtCUPerfStart | 1.3.6.1.4.1.193.96.115.5.3.1.1.2 | DateAndTime | read-only | Indicates when monitoring was started |
| STR mlbasAtCUSwIdModem | 1.3.6.1.4.1.193.96.115.5.3.1.1.10 | DisplayString | read-only | The software id of the modem |
| INT mlbasAtCUValid15MinPerf | 1.3.6.1.4.1.193.96.115.5.3.1.1.5 | INTEGER | read-only | Number of valid 15 min. periods stored in CP |
| INT mlbasAtCUValid24HPerf | 1.3.6.1.4.1.193.96.115.5.3.1.1.7 | INTEGER | read-only | Number of valid 24 hour periods stored in CP |
| INT mlbasAtRUDownFreq | 1.3.6.1.4.1.193.96.115.5.3.1.1.11 | INTEGER | read-only | Current down link frequency [kHz] |
| STR mlbasAtRUHwIdRadio | 1.3.6.1.4.1.193.96.115.5.3.1.1.14 | DisplayString | read-only | The hardware id of the radio |
| INT mlbasAtRUOutputPower | 1.3.6.1.4.1.193.96.115.5.3.1.1.13 | INTEGER | read-only | Current output power [dbm] |
| STR mlbasAtRUSwIdRadio | 1.3.6.1.4.1.193.96.115.5.3.1.1.15 | DisplayString | read-only | The software id of the radio |
| INT mlbasAtRUUpFreq | 1.3.6.1.4.1.193.96.115.5.3.1.1.12 | INTEGER | read-only | Current up link frequency [kHz] |
| STR mlbasAtSlotLocation | 1.3.6.1.4.1.193.96.115.5.2.1.1.3 | DisplayString | read-write | Physical location of the AT |
| INT mlbasAtSlotRnPos | 1.3.6.1.4.1.193.96.115.5.2.1.1.2 | INTEGER | read-write | RN control board pos. within the subrack |
| ROW mlbasAtSlotRowStatus | 1.3.6.1.4.1.193.96.115.5.2.1.1.6 | RowStatus | read-write | |
| INT mlbasAtSlotSignOnAction | 1.3.6.1.4.1.193.96.115.5.2.1.1.4 | INTEGER | read-write | Initiates sign on for the AT |
| INT mlbasAtSlotSignOnStatus | 1.3.6.1.4.1.193.96.115.5.2.1.1.5 | INTEGER | read-only | Current sign on status for the AT |
| STR mlbasAtSlotTerminalId | 1.3.6.1.4.1.193.96.115.5.2.1.1.1 | DisplayString | read-write | Access Terminal Identity, unique within the system |
| INT mlbasDL15LogAvailTime | 1.3.6.1.4.1.193.96.115.5.9.1.1.5 | INTEGER | read-only | Values for 15 minute counters: Availability time |
| INT mlbasDL15LogAverageInPower | 1.3.6.1.4.1.193.96.115.5.9.1.1.12 | INTEGER | read-only | Values for 15 minute counters: Average electric power received by antenna |
| INT mlbasDL15LogAverageOutPower | 1.3.6.1.4.1.193.96.115.5.9.1.1.15 | INTEGER | read-only | Values for 15 minute counters: Average power transmitted by radio |
| INT mlbasDL15LogBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.9.1.1.9 | INTEGER | read-only | Values for 15 minute counters: Background block error ratio |
| INT mlbasDL15LogCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.9.1.1.4 | INTEGER | read-only | Values for 15 minute counters: Constant Bit Rate discarded cells |
| INT mlbasDL15LogCellErrRatio | 1.3.6.1.4.1.193.96.115.5.9.1.1.1 | INTEGER | read-only | Values for 15 minute counters: Cell error ratio |
| INT mlbasDL15LogCellLossRatio | 1.3.6.1.4.1.193.96.115.5.9.1.1.2 | INTEGER | read-only | Values for 15 minute counters: Cell loss ratio |
| INT mlbasDL15LogErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.9.1.1.7 | INTEGER | read-only | Values for 15 minute counters: Errored seconds |
| INT mlbasDL15LogMaxInPower | 1.3.6.1.4.1.193.96.115.5.9.1.1.11 | INTEGER | read-only | Values for 15 minute counters: Maximum electric power received by antenna |
| INT mlbasDL15LogMaxOutPower | 1.3.6.1.4.1.193.96.115.5.9.1.1.14 | INTEGER | read-only | Values for 15 minute counters: Maximum power transmitted by radio |
| INT mlbasDL15LogMinInPower | 1.3.6.1.4.1.193.96.115.5.9.1.1.10 | INTEGER | read-only | Values for 15 minute counters: Minimum electric power received by antenna |
| INT mlbasDL15LogMinOutPower | 1.3.6.1.4.1.193.96.115.5.9.1.1.13 | INTEGER | read-only | Values for 15 minute counters: Minimum power transmitted by radio |
| INT mlbasDL15LogSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.9.1.1.8 | INTEGER | read-only | Values for 15 minute counters: Severely errored seconds |
| INT mlbasDL15LogUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.9.1.1.3 | INTEGER | read-only | Values for 15 minute counters: Unspecified Bit Rate discarded cells |
| INT mlbasDL15LogUnavailTime | 1.3.6.1.4.1.193.96.115.5.9.1.1.6 | INTEGER | read-only | Values for 15 minute counters: Unavailability time |
| INT mlbasDL15PerfAvailTime | 1.3.6.1.4.1.193.96.115.5.5.1.1.7 | INTEGER | read-only | Values for 15 minute counters: Availability time |
| INT mlbasDL15PerfAverageInPower | 1.3.6.1.4.1.193.96.115.5.5.1.1.14 | INTEGER | read-only | Values for 15 minute counters: Average electric power received by antenna |
| INT mlbasDL15PerfAverageOutPower | 1.3.6.1.4.1.193.96.115.5.5.1.1.17 | INTEGER | read-only | Values for 15 minute counters: Average power transmitted by radio |
| INT mlbasDL15PerfBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.5.1.1.11 | INTEGER | read-only | Values for 15 minute counters: Background block error ratio |
| INT mlbasDL15PerfCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.5.1.1.6 | INTEGER | read-only | Values for 15 minute counters: Constant Bit Rate discarded cells |
| INT mlbasDL15PerfCellErrRatio | 1.3.6.1.4.1.193.96.115.5.5.1.1.3 | INTEGER | read-only | Values for 15 minute counters: Cell error ratio |
| INT mlbasDL15PerfCellLossRatio | 1.3.6.1.4.1.193.96.115.5.5.1.1.4 | INTEGER | read-only | Values for 15 minute counters: Cell loss ratio |
| INT mlbasDL15PerfErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.5.1.1.9 | INTEGER | read-only | Values for 15 minute counters: Errored seconds |
| INT mlbasDL15PerfMaxInPower | 1.3.6.1.4.1.193.96.115.5.5.1.1.13 | INTEGER | read-only | Values for 15 minute counters: Maximum electric power received by antenna |
| INT mlbasDL15PerfMaxOutPower | 1.3.6.1.4.1.193.96.115.5.5.1.1.16 | INTEGER | read-only | Values for 15 minute counters: Maximum power transmitted by radio |
| INT mlbasDL15PerfMinInPower | 1.3.6.1.4.1.193.96.115.5.5.1.1.12 | INTEGER | read-only | Values for 15 minute counters: Minimum electric power received by antenna |
| INT mlbasDL15PerfMinOutPower | 1.3.6.1.4.1.193.96.115.5.5.1.1.15 | INTEGER | read-only | Values for 15 minute counters: Minimum power transmitted by radio |
| INT mlbasDL15PerfSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.5.1.1.10 | INTEGER | read-only | Values for 15 minute counters: Severely errored seconds |
| STR mlbasDL15PerfTerminalId | 1.3.6.1.4.1.193.96.115.5.5.1.1.18 | DisplayString | read-only | Access Terminal Identity, unique within the system |
| INT mlbasDL15PerfUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.5.1.1.5 | INTEGER | read-only | Values for 15 minute counters: Unspecified Bit Rate discarded cells |
| INT mlbasDL15PerfUnavailTime | 1.3.6.1.4.1.193.96.115.5.5.1.1.8 | INTEGER | read-only | Values for 15 minute counters: Unavailability time |
| INT mlbasDL15PeriodIndex | 1.3.6.1.4.1.193.96.115.5.5.1.1.1 | INTEGER | read-only | The period number |
| DAT mlbasDL15UpdateTime | 1.3.6.1.4.1.193.96.115.5.5.1.1.2 | DateAndTime | read-only | Update time for the 15 minute counters |
| INT mlbasDL24LogAvailTime | 1.3.6.1.4.1.193.96.115.5.11.1.1.5 | INTEGER | read-only | Values for the 24 hour counters: Availability time |
| INT mlbasDL24LogAverageInPower | 1.3.6.1.4.1.193.96.115.5.11.1.1.12 | INTEGER | read-only | Values for the 24 hour counters: Average electric power received by antenna |
| INT mlbasDL24LogAverageOutPower | 1.3.6.1.4.1.193.96.115.5.11.1.1.15 | INTEGER | read-only | Values for the 24 hour counters: Average power transmitted by radio |
| INT mlbasDL24LogBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.11.1.1.9 | INTEGER | read-only | Values for the 24 hour counters: Background block error ratio |
| INT mlbasDL24LogCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.11.1.1.4 | INTEGER | read-only | Values for the 24 hour counters: Constant Bit Rate discarded cells |
| INT mlbasDL24LogCellErrRatio | 1.3.6.1.4.1.193.96.115.5.11.1.1.1 | INTEGER | read-only | Values for the 24 hour counters: Cell error ratio |
| INT mlbasDL24LogCellLossRatio | 1.3.6.1.4.1.193.96.115.5.11.1.1.2 | INTEGER | read-only | Values for the 24 hour counters: Cell loss ratio |
| INT mlbasDL24LogErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.11.1.1.7 | INTEGER | read-only | Values for the 24 hour counters: Errored seconds |
| INT mlbasDL24LogMaxInPower | 1.3.6.1.4.1.193.96.115.5.11.1.1.11 | INTEGER | read-only | Values for the 24 hour counters: Maximum electric power received by antenna |
| INT mlbasDL24LogMaxOutPower | 1.3.6.1.4.1.193.96.115.5.11.1.1.14 | INTEGER | read-only | Values for the 24 hour counters: Maximum power transmitted by radio |
| INT mlbasDL24LogMinInPower | 1.3.6.1.4.1.193.96.115.5.11.1.1.10 | INTEGER | read-only | Values for the 24 hour counters: Minimum electric power received by antenna |
| INT mlbasDL24LogMinOutPower | 1.3.6.1.4.1.193.96.115.5.11.1.1.13 | INTEGER | read-only | Values for the 24 hour counters: Minimum power transmitted by radio |
| INT mlbasDL24LogSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.11.1.1.8 | INTEGER | read-only | Values for the 24 hour counters: Severely errored seconds |
| INT mlbasDL24LogUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.11.1.1.3 | INTEGER | read-only | Values for the 24 hour counters: Unspecified Bit Rate discarded cells |
| INT mlbasDL24LogUnavailTime | 1.3.6.1.4.1.193.96.115.5.11.1.1.6 | INTEGER | read-only | Values for the 24 hour counters: Unavailability time |
| INT mlbasDL24PerfAvailTime | 1.3.6.1.4.1.193.96.115.5.7.1.1.7 | INTEGER | read-only | Values for the 24 hour counters: Availability time |
| INT mlbasDL24PerfAverageInPower | 1.3.6.1.4.1.193.96.115.5.7.1.1.14 | INTEGER | read-only | Values for the 24 hour counters: Average electric power received by antenna |
| INT mlbasDL24PerfAverageOutPower | 1.3.6.1.4.1.193.96.115.5.7.1.1.17 | INTEGER | read-only | Values for the 24 hour counters: Average power transmitted by radio |
| INT mlbasDL24PerfBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.7.1.1.11 | INTEGER | read-only | Values for the 24 hour counters: Background block error ratio |
| INT mlbasDL24PerfCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.7.1.1.6 | INTEGER | read-only | Values for the 24 hour counters: Constant Bit Rate discarded cells |
| INT mlbasDL24PerfCellErrRatio | 1.3.6.1.4.1.193.96.115.5.7.1.1.3 | INTEGER | read-only | Values for the 24 hour counters: Cell error ratio |
| INT mlbasDL24PerfCellLossRatio | 1.3.6.1.4.1.193.96.115.5.7.1.1.4 | INTEGER | read-only | Values for the 24 hour counters: Cell loss ratio |
| INT mlbasDL24PerfErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.7.1.1.9 | INTEGER | read-only | Values for the 24 hour counters: Errored seconds |
| INT mlbasDL24PerfMaxInPower | 1.3.6.1.4.1.193.96.115.5.7.1.1.13 | INTEGER | read-only | Values for the 24 hour counters: Maximum electric power received by antenna |
| INT mlbasDL24PerfMaxOutPower | 1.3.6.1.4.1.193.96.115.5.7.1.1.16 | INTEGER | read-only | Values for the 24 hour counters: Maximum power transmitted by radio |
| INT mlbasDL24PerfMinInPower | 1.3.6.1.4.1.193.96.115.5.7.1.1.12 | INTEGER | read-only | Values for the 24 hour counters: Minimum electric power received by antenna |
| INT mlbasDL24PerfMinOutPower | 1.3.6.1.4.1.193.96.115.5.7.1.1.15 | INTEGER | read-only | Values for the 24 hour counters: Minimum power transmitted by radio |
| INT mlbasDL24PerfSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.7.1.1.10 | INTEGER | read-only | Values for the 24 hour counters: Severely errored seconds |
| STR mlbasDL24PerfTerminalId | 1.3.6.1.4.1.193.96.115.5.7.1.1.18 | DisplayString | read-only | Access Terminal Identity, unique within the system |
| INT mlbasDL24PerfUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.7.1.1.5 | INTEGER | read-only | Values for the 24 hour counters: Unspecified Bit Rate discarded cells |
| INT mlbasDL24PerfUnavailTime | 1.3.6.1.4.1.193.96.115.5.7.1.1.8 | INTEGER | read-only | Values for the 24 hour counters: Unavailability time |
| INT mlbasDL24PeriodIndex | 1.3.6.1.4.1.193.96.115.5.7.1.1.1 | INTEGER | read-only | The period number |
| DAT mlbasDL24UpdateTime | 1.3.6.1.4.1.193.96.115.5.7.1.1.2 | DateAndTime | read-only | Update time for the 24 hour counters |
| mlbasDownLinkLog15min | 1.3.6.1.4.1.193.96.115.5.9 | |||
| mlbasDownLinkLog15minEntry | 1.3.6.1.4.1.193.96.115.5.9.1.1 | not-accessible | This entity contains performance data collected for the down link. | |
| mlbasDownLinkLog15minTable | 1.3.6.1.4.1.193.96.115.5.9.1 | not-accessible | Down Link Log 15 min Table | |
| mlbasDownLinkLog24hour | 1.3.6.1.4.1.193.96.115.5.11 | |||
| mlbasDownLinkLog24hourEntry | 1.3.6.1.4.1.193.96.115.5.11.1.1 | not-accessible | ||
| mlbasDownLinkLog24hourTable | 1.3.6.1.4.1.193.96.115.5.11.1 | not-accessible | This entity contains performance data collected for the down link. Down Link Log 24 hour Table. | |
| mlbasDownLinkPerf15min | 1.3.6.1.4.1.193.96.115.5.5 | |||
| mlbasDownLinkPerf15minEntry | 1.3.6.1.4.1.193.96.115.5.5.1.1 | not-accessible | This entity contains performance data collected for the down link. | |
| mlbasDownLinkPerf15minTable | 1.3.6.1.4.1.193.96.115.5.5.1 | not-accessible | Down Link Performance 15 min Table | |
| mlbasDownLinkPerf24hour | 1.3.6.1.4.1.193.96.115.5.7 | |||
| mlbasDownLinkPerf24hourEntry | 1.3.6.1.4.1.193.96.115.5.7.1.1 | not-accessible | ||
| mlbasDownLinkPerf24hourTable | 1.3.6.1.4.1.193.96.115.5.7.1 | not-accessible | This entity contains performance data collected for the down link. Down Link Performance 24 hour Table. | |
| mlbasRadioNode | 1.3.6.1.4.1.193.96.115.5.1 | |||
| mlbasRadioNodeEntry | 1.3.6.1.4.1.193.96.115.5.1.1.1 | not-accessible | This entity represents a WBAS radio node which consists of an indoor Control Unit (CU) and an outdoor Radio Unit. The CU consists of MAC and modem and is implemented as an extended board that can be inserted into a subrack slot. | |
| mlbasRadioNodeTable | 1.3.6.1.4.1.193.96.115.5.1.1 | not-accessible | Radio node table | |
| INT mlbasRnCUAlarmLevel | 1.3.6.1.4.1.193.96.115.5.1.1.1.7 | INTEGER | read-write | Controls the alarm filtering at the RN |
| INT mlbasRnCUBerThreshold | 1.3.6.1.4.1.193.96.115.5.1.1.1.3 | INTEGER | read-write | Threshold for bit error rate alarms |
| INT mlbasRnCUBwLimit | 1.3.6.1.4.1.193.96.115.5.1.1.1.4 | INTEGER | read-write | Percentage of the available RN - AT air interface bandwidth that is to be utilized for user-traffic |
| INT mlbasRnCUChBw | 1.3.6.1.4.1.193.96.115.5.1.1.1.10 | INTEGER | read-only | Channel Bandwidth [kHz] |
| STR mlbasRnCUHwIdModem | 1.3.6.1.4.1.193.96.115.5.1.1.1.11 | DisplayString | read-only | The hardware id of the modem |
| STR mlbasRnCUId | 1.3.6.1.4.1.193.96.115.5.1.1.1.1 | DisplayString | read-write | Radio Node Identity |
| INT mlbasRnCULoopMode | 1.3.6.1.4.1.193.96.115.5.1.1.1.5 | INTEGER | read-write | The loop mode |
| INT mlbasRnCULoopPoint | 1.3.6.1.4.1.193.96.115.5.1.1.1.6 | INTEGER | read-write | The loop point: Only editable when permanent |
| INT mlbasRnCUSecurity | 1.3.6.1.4.1.193.96.115.5.1.1.1.2 | INTEGER | read-write | Controls scrambling on RNs and ATs |
| INT mlbasRnCUSignedOffAts | 1.3.6.1.4.1.193.96.115.5.1.1.1.9 | INTEGER | read-only | Number of signed off ATs at the RN |
| INT mlbasRnCUSignedOnAts | 1.3.6.1.4.1.193.96.115.5.1.1.1.8 | INTEGER | read-only | Number of signed on ATs at the RN |
| INT mlbasRnCUSignOffAts | 1.3.6.1.4.1.193.96.115.5.1.1.1.26 | INTEGER | read-write | Initiates sign off of all ATs at the RN |
| STR mlbasRnCUSwIdModem | 1.3.6.1.4.1.193.96.115.5.1.1.1.12 | DisplayString | read-only | The software id of the modem |
| INT mlbasRnInterfLevel | 1.3.6.1.4.1.193.96.115.5.1.1.1.24 | INTEGER | read-write | Interference levels to set the RSSI expected |
| INT mlbasRnRSSIEXP | 1.3.6.1.4.1.193.96.115.5.1.1.1.25 | INTEGER | read-write | Nominal RF Input Power [dbm] |
| INT mlbasRnRUDownFreq | 1.3.6.1.4.1.193.96.115.5.1.1.1.13 | INTEGER | read-write | Current down link center frequency [kHz] |
| INT mlbasRnRUDownFreqMax | 1.3.6.1.4.1.193.96.115.5.1.1.1.16 | INTEGER | read-only | Max. down link center frequency in subband [kHz] |
| INT mlbasRnRUDownFreqMin | 1.3.6.1.4.1.193.96.115.5.1.1.1.15 | INTEGER | read-only | Min. down link center frequency in subband [kHz] |
| INT mlbasRnRUFreqDuplex | 1.3.6.1.4.1.193.96.115.5.1.1.1.17 | INTEGER | read-only | Duplex dist. (mlbasRnRUUpFreq - mlbasRnRUDownFreq) [kHz] |
| INT mlbasRnRUFreqStep | 1.3.6.1.4.1.193.96.115.5.1.1.1.18 | INTEGER | read-only | Size of one frequency tuning step [kHz] |
| STR mlbasRnRUHwIdRadio | 1.3.6.1.4.1.193.96.115.5.1.1.1.22 | DisplayString | read-only | The hardware id of the radio |
| INT mlbasRnRUOutputPower | 1.3.6.1.4.1.193.96.115.5.1.1.1.19 | INTEGER | read-write | Current output power [dbm] |
| INT mlbasRnRUOutputPowerMax | 1.3.6.1.4.1.193.96.115.5.1.1.1.21 | INTEGER | read-only | Maximum output power [dbm] |
| INT mlbasRnRUOutputPowerMin | 1.3.6.1.4.1.193.96.115.5.1.1.1.20 | INTEGER | read-only | Minimum output power [dbm] |
| STR mlbasRnRUSwIdRadio | 1.3.6.1.4.1.193.96.115.5.1.1.1.23 | DisplayString | read-only | The software id of the radio |
| INT mlbasRnRUUpFreq | 1.3.6.1.4.1.193.96.115.5.1.1.1.14 | INTEGER | read-only | Current up link center frequency [kHz] |
| INT mlbasRnSwitchBoardAction | 1.3.6.1.4.1.193.96.115.5.1.1.1.27 | INTEGER | read-write | |
| mlbasServiceUnit | 1.3.6.1.4.1.193.96.115.5.4 | |||
| mlbasServiceUnitEntry | 1.3.6.1.4.1.193.96.115.5.4.1.1 | not-accessible | This entity represents a WBAS Service Interface Unit which can be inserted into an Access Terminal as a plug-in card. Both plug-in card and corresponding slot are covered by the entity. | |
| mlbasServiceUnitPort | 1.3.6.1.4.1.193.96.115.5.13 | |||
| mlbasServiceUnitPortEntry | 1.3.6.1.4.1.193.96.115.5.13.1.1 | not-accessible | Entries in the mlbasServiceUnitPortTable represent ports at Access Terminals provided as Service Unit ports at each Access Terminal. | |
| mlbasServiceUnitPortTable | 1.3.6.1.4.1.193.96.115.5.13.1 | not-accessible | Service Unit Port table | |
| mlbasServiceUnitTable | 1.3.6.1.4.1.193.96.115.5.4.1 | not-accessible | Service Interface Unit table | |
| STR mlbasSuHwId | 1.3.6.1.4.1.193.96.115.5.4.1.1.4 | DisplayString | read-only | Hardware identity; mlbasSuManagedStatus must be set to unmanaged |
| INT mlbasSuManagedStatus | 1.3.6.1.4.1.193.96.115.5.4.1.1.2 | INTEGER | read-write | Defines status of the slot; Only managed and unmanaged is selectable; When setting managed, empty or present is returned |
| INT mlbasSuNumOfPorts | 1.3.6.1.4.1.193.96.115.5.4.1.1.9 | INTEGER | read-only | Number of provided ports on the SU |
| INT mlbasSuOperState | 1.3.6.1.4.1.193.96.115.5.4.1.1.3 | INTEGER | read-only | Operational state |
| INT mlbasSuPciId | 1.3.6.1.4.1.193.96.115.5.4.1.1.6 | INTEGER | read-only | ... |
| INT mlbasSuPciVendor | 1.3.6.1.4.1.193.96.115.5.4.1.1.7 | INTEGER | read-only | ... |
| INT mlbasSUPortIndex | 1.3.6.1.4.1.193.96.115.5.13.1.1.2 | INTEGER | read-only | Reference to the port at the SU. |
| INT mlbasSUPortPosition | 1.3.6.1.4.1.193.96.115.5.13.1.1.1 | INTEGER | read-only | Reference to slot at the AT for the SU. |
| INT mlbasSuPortStartIndex | 1.3.6.1.4.1.193.96.115.5.4.1.1.8 | INTEGER | read-only | Port start index |
| INT mlbasSuPos | 1.3.6.1.4.1.193.96.115.5.4.1.1.1 | INTEGER | read-only | Position within the AT |
| INT mlbasSuType | 1.3.6.1.4.1.193.96.115.5.4.1.1.5 | INTEGER | read-write | Interface type |
| INT mlbasUL15LogAvailTime | 1.3.6.1.4.1.193.96.115.5.10.1.1.5 | INTEGER | read-only | Values for 15 minute counters: Availability time |
| INT mlbasUL15LogAverageInPower | 1.3.6.1.4.1.193.96.115.5.10.1.1.12 | INTEGER | read-only | Values for 15 minute counters: Average electric power received by antenna |
| INT mlbasUL15LogAverageOutPower | 1.3.6.1.4.1.193.96.115.5.10.1.1.15 | INTEGER | read-only | Values for 15 minute counters: Average power transmitted by radio |
| INT mlbasUL15LogBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.10.1.1.9 | INTEGER | read-only | Values for 15 minute counters: Background block error ratio |
| INT mlbasUL15LogCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.10.1.1.4 | INTEGER | read-only | Values for 15 minute counters: Constant Bit Rate discarded cells |
| INT mlbasUL15LogCellErrRatio | 1.3.6.1.4.1.193.96.115.5.10.1.1.1 | INTEGER | read-only | Previous values for 15 minute counters: Cell error ratio |
| INT mlbasUL15LogCellLossRatio | 1.3.6.1.4.1.193.96.115.5.10.1.1.2 | INTEGER | read-only | Values for 15 minute counters: Cell loss ratio |
| INT mlbasUL15LogErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.10.1.1.7 | INTEGER | read-only | Values for 15 minute counters: Errored seconds |
| INT mlbasUL15LogMaxInPower | 1.3.6.1.4.1.193.96.115.5.10.1.1.11 | INTEGER | read-only | Values for 15 minute counters: Maximum electric power received by antenna |
| INT mlbasUL15LogMaxOutPower | 1.3.6.1.4.1.193.96.115.5.10.1.1.14 | INTEGER | read-only | Values for 15 minute counters: Maximum power transmitted by radio |
| INT mlbasUL15LogMinInPower | 1.3.6.1.4.1.193.96.115.5.10.1.1.10 | INTEGER | read-only | Values for 15 minute counters: Minimum electric power received by antenna |
| INT mlbasUL15LogMinOutPower | 1.3.6.1.4.1.193.96.115.5.10.1.1.13 | INTEGER | read-only | Values for 15 minute counters: Minimum power transmitted by radio |
| INT mlbasUL15LogSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.10.1.1.8 | INTEGER | read-only | Values for 15 minute counters: Severely errored seconds |
| INT mlbasUL15LogUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.10.1.1.3 | INTEGER | read-only | Values for 15 minute counters: Unspecified Bit Rate discarded cells |
| INT mlbasUL15LogUnavailTime | 1.3.6.1.4.1.193.96.115.5.10.1.1.6 | INTEGER | read-only | Values for 15 minute counters: Unavailability time |
| INT mlbasUL15PerfAvailTime | 1.3.6.1.4.1.193.96.115.5.6.1.1.7 | INTEGER | read-only | Values for 15 minute counters: Availability time |
| INT mlbasUL15PerfAverageInPower | 1.3.6.1.4.1.193.96.115.5.6.1.1.14 | INTEGER | read-only | Values for 15 minute counters: Average electric power received by antenna |
| INT mlbasUL15PerfAverageOutPower | 1.3.6.1.4.1.193.96.115.5.6.1.1.17 | INTEGER | read-only | Values for 15 minute counters: Average power transmitted by radio |
| INT mlbasUL15PerfBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.6.1.1.11 | INTEGER | read-only | Values for 15 minute counters: Background block error ratio |
| INT mlbasUL15PerfCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.6.1.1.6 | INTEGER | read-only | Values for 15 minute counters: Constant Bit Rate discarded cells |
| INT mlbasUL15PerfCellErrRatio | 1.3.6.1.4.1.193.96.115.5.6.1.1.3 | INTEGER | read-only | Previous values for 15 minute counters: Cell error ratio |
| INT mlbasUL15PerfCellLossRatio | 1.3.6.1.4.1.193.96.115.5.6.1.1.4 | INTEGER | read-only | Values for 15 minute counters: Cell loss ratio |
| INT mlbasUL15PerfErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.6.1.1.9 | INTEGER | read-only | Values for 15 minute counters: Errored seconds |
| INT mlbasUL15PerfMaxInPower | 1.3.6.1.4.1.193.96.115.5.6.1.1.13 | INTEGER | read-only | Values for 15 minute counters: Maximum electric power received by antenna |
| INT mlbasUL15PerfMaxOutPower | 1.3.6.1.4.1.193.96.115.5.6.1.1.16 | INTEGER | read-only | Values for 15 minute counters: Maximum power transmitted by radio |
| INT mlbasUL15PerfMinInPower | 1.3.6.1.4.1.193.96.115.5.6.1.1.12 | INTEGER | read-only | Values for 15 minute counters: Minimum electric power received by antenna |
| INT mlbasUL15PerfMinOutPower | 1.3.6.1.4.1.193.96.115.5.6.1.1.15 | INTEGER | read-only | Values for 15 minute counters: Minimum power transmitted by radio |
| INT mlbasUL15PerfSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.6.1.1.10 | INTEGER | read-only | Values for 15 minute counters: Severely errored seconds |
| STR mlbasUL15PerfTerminalId | 1.3.6.1.4.1.193.96.115.5.6.1.1.18 | DisplayString | read-only | Access Terminal Identity, unique within the system |
| INT mlbasUL15PerfUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.6.1.1.5 | INTEGER | read-only | Values for 15 minute counters: Unspecified Bit Rate discarded cells |
| INT mlbasUL15PerfUnavailTime | 1.3.6.1.4.1.193.96.115.5.6.1.1.8 | INTEGER | read-only | Values for 15 minute counters: Unavailability time |
| INT mlbasUL15PeriodIndex | 1.3.6.1.4.1.193.96.115.5.6.1.1.1 | INTEGER | read-only | The period number |
| DAT mlbasUL15UpdateTime | 1.3.6.1.4.1.193.96.115.5.6.1.1.2 | DateAndTime | read-only | Update time for the 15 minute counters |
| INT mlbasUL24LogAvailTime | 1.3.6.1.4.1.193.96.115.5.12.1.1.5 | INTEGER | read-only | Values for the 24 hour counters: Availability time |
| INT mlbasUL24LogAverageInPower | 1.3.6.1.4.1.193.96.115.5.12.1.1.12 | INTEGER | read-only | Values for the 24 hour counters: Average electric power received by antenna |
| INT mlbasUL24LogAverageOutPower | 1.3.6.1.4.1.193.96.115.5.12.1.1.15 | INTEGER | read-only | Values for the 24 hour counters: Average power transmitted by radio |
| INT mlbasUL24LogBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.12.1.1.9 | INTEGER | read-only | Values for the 24 hour counters: Background block error ratio |
| INT mlbasUL24LogCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.12.1.1.4 | INTEGER | read-only | Values for the 24 hour counters: Constant Bit Rate discarded cells |
| INT mlbasUL24LogCellErrRatio | 1.3.6.1.4.1.193.96.115.5.12.1.1.1 | INTEGER | read-only | Values for the 24 hour counters: Cell error ratio |
| INT mlbasUL24LogCellLossRatio | 1.3.6.1.4.1.193.96.115.5.12.1.1.2 | INTEGER | read-only | Values for the 24 hour counters: Cell loss ratio |
| INT mlbasUL24LogErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.12.1.1.7 | INTEGER | read-only | Values for the 24 hour counters: Errored seconds |
| INT mlbasUL24LogMaxInPower | 1.3.6.1.4.1.193.96.115.5.12.1.1.11 | INTEGER | read-only | Values for the 24 hour counters: Maximum electric power received by antenna |
| INT mlbasUL24LogMaxOutPower | 1.3.6.1.4.1.193.96.115.5.12.1.1.14 | INTEGER | read-only | Values for the 24 hour counters: Maximum power transmitted by radio |
| INT mlbasUL24LogMinInPower | 1.3.6.1.4.1.193.96.115.5.12.1.1.10 | INTEGER | read-only | Values for the 24 hour counters: Minimum electric power received by antenna |
| INT mlbasUL24LogMinOutPower | 1.3.6.1.4.1.193.96.115.5.12.1.1.13 | INTEGER | read-only | Values for the 24 hour counters: Minimum power transmitted by radio |
| INT mlbasUL24LogSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.12.1.1.8 | INTEGER | read-only | Values for the 24 hour counters: Severely errored seconds |
| INT mlbasUL24LogUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.12.1.1.3 | INTEGER | read-only | Values for the 24 hour counters: Unspecified Bit Rate discarded cells |
| INT mlbasUL24LogUnavailTime | 1.3.6.1.4.1.193.96.115.5.12.1.1.6 | INTEGER | read-only | Values for the 24 hour counters: Unavailability time |
| INT mlbasUL24PerfAvailTime | 1.3.6.1.4.1.193.96.115.5.8.1.1.7 | INTEGER | read-only | Values for the 24 hour counters: Availability time |
| INT mlbasUL24PerfAverageInPower | 1.3.6.1.4.1.193.96.115.5.8.1.1.14 | INTEGER | read-only | Values for the 24 hour counters: Average electric power received by antenna |
| INT mlbasUL24PerfAverageOutPower | 1.3.6.1.4.1.193.96.115.5.8.1.1.17 | INTEGER | read-only | Values for the 24 hour counters: Average power transmitted by radio |
| INT mlbasUL24PerfBgBlockErrRatio | 1.3.6.1.4.1.193.96.115.5.8.1.1.11 | INTEGER | read-only | Values for the 24 hour counters: Background block error ratio |
| INT mlbasUL24PerfCbrDiscCell | 1.3.6.1.4.1.193.96.115.5.8.1.1.6 | INTEGER | read-only | Values for the 24 hour counters: Constant Bit Rate discarded cells |
| INT mlbasUL24PerfCellErrRatio | 1.3.6.1.4.1.193.96.115.5.8.1.1.3 | INTEGER | read-only | Values for the 24 hour counters: Cell error ratio |
| INT mlbasUL24PerfCellLossRatio | 1.3.6.1.4.1.193.96.115.5.8.1.1.4 | INTEGER | read-only | Values for the 24 hour counters: Cell loss ratio |
| INT mlbasUL24PerfErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.8.1.1.9 | INTEGER | read-only | Values for the 24 hour counters: Errored seconds |
| INT mlbasUL24PerfMaxInPower | 1.3.6.1.4.1.193.96.115.5.8.1.1.13 | INTEGER | read-only | Values for the 24 hour counters: Maximum electric power received by antenna |
| INT mlbasUL24PerfMaxOutPower | 1.3.6.1.4.1.193.96.115.5.8.1.1.16 | INTEGER | read-only | Values for the 24 hour counters: Maximum power transmitted by radio |
| INT mlbasUL24PerfMinInPower | 1.3.6.1.4.1.193.96.115.5.8.1.1.12 | INTEGER | read-only | Values for the 24 hour counters: Minimum electric power received by antenna |
| INT mlbasUL24PerfMinOutPower | 1.3.6.1.4.1.193.96.115.5.8.1.1.15 | INTEGER | read-only | Values for the 24 hour counters: Minimum power transmitted by radio |
| INT mlbasUL24PerfSevErroredSecRatio | 1.3.6.1.4.1.193.96.115.5.8.1.1.10 | INTEGER | read-only | Values for the 24 hour counters: Severely errored seconds |
| STR mlbasUL24PerfTerminalId | 1.3.6.1.4.1.193.96.115.5.8.1.1.18 | DisplayString | read-only | Access Terminal Identity, unique within the system |
| INT mlbasUL24PerfUbrDiscCell | 1.3.6.1.4.1.193.96.115.5.8.1.1.5 | INTEGER | read-only | Values for the 24 hour counters: Unspecified Bit Rate discarded cells |
| INT mlbasUL24PerfUnavailTime | 1.3.6.1.4.1.193.96.115.5.8.1.1.8 | INTEGER | read-only | Values for the 24 hour counters: Unavailability time |
| INT mlbasUL24PeriodIndex | 1.3.6.1.4.1.193.96.115.5.8.1.1.1 | INTEGER | read-only | The period number |
| DAT mlbasUL24UpdateTime | 1.3.6.1.4.1.193.96.115.5.8.1.1.2 | DateAndTime | read-only | Update time for the 24 hour counters |
| mlbasUpLinkLog15min | 1.3.6.1.4.1.193.96.115.5.10 | |||
| mlbasUpLinkLog15minEntry | 1.3.6.1.4.1.193.96.115.5.10.1.1 | not-accessible | This entity contains performance data collected for the up link. | |
| mlbasUpLinkLog15minTable | 1.3.6.1.4.1.193.96.115.5.10.1 | not-accessible | Up Link Log 15 min Table | |
| mlbasUpLinkLog24hour | 1.3.6.1.4.1.193.96.115.5.12 | |||
| mlbasUpLinkLog24hourEntry | 1.3.6.1.4.1.193.96.115.5.12.1.1 | not-accessible | ||
| mlbasUpLinkLog24hourTable | 1.3.6.1.4.1.193.96.115.5.12.1 | not-accessible | This entity contains performance data collected for the up link. Up Link Log 24 hour Table. | |
| mlbasUpLinkPerf15min | 1.3.6.1.4.1.193.96.115.5.6 | |||
| mlbasUpLinkPerf15minEntry | 1.3.6.1.4.1.193.96.115.5.6.1.1 | not-accessible | This entity contains performance data collected for the up link. | |
| mlbasUpLinkPerf15minTable | 1.3.6.1.4.1.193.96.115.5.6.1 | not-accessible | Up Link Performance 15 min Table | |
| mlbasUpLinkPerf24hour | 1.3.6.1.4.1.193.96.115.5.8 | |||
| mlbasUpLinkPerf24hourEntry | 1.3.6.1.4.1.193.96.115.5.8.1.1 | not-accessible | ||
| mlbasUpLinkPerf24hourTable | 1.3.6.1.4.1.193.96.115.5.8.1 | not-accessible | This entity contains performance data collected for the up link. Up Link Performance 24 hour Table. |
RFC description
MIB for Ericsson ANS multi-level basestation management, supporting radio node, terminal slot, and link performance statistics.
Start monitoring ANS/CO+RE Multi-Link Broadband Access Server (MLBAS) radio nodes (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.