ALPHA-RECTIFIER-SYS-MIB

All MIBs › ALPHA-RECTIFIER-SYS-MIB

Organization: Alpha Technologies Ltd.

Last Updated: 2015-07-28

Category: Hardware and Environment

Description: Alpha Technologies rectifier system MIB for monitoring AC-to-DC rectifier module status, output, and fault alarms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALPHA-RECTIFIER-SYS-MIB?

ALPHA-RECTIFIER-SYS-MIB is a vendor-specific MIB from Alpha Technologies for their DC power system/rectifier system controllers used in telecom and network power plants. Based on its description, it is focused on the notification (trap) objects raised by the system controller rather than a large set of polled data objects. It is a hardware-status-monitoring MIB in the purest sense: its purpose is to alert operators to conditions like rectifier module failure, abnormal output, or other power-system fault conditions -- directly analogous to power supply and fan health alarms in other device MIBs, but for AC-to-DC rectifier hardware. It likely depends on companion Alpha Technologies MIB modules that define the underlying rectifier and system-controller status/config objects referenced by these notifications. It is deployed in telecom central offices, cell sites, and data centers for ALPHA-RECTIFIER-SYS-MIB SNMP monitoring of Alpha Technologies rectifier and power-system controllers supplying DC power to network equipment.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALPHA-RECTIFIER-SYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alpha Technologies rectifier/power system controller

Monitoring Examples

No sample objects were provided for this module, and its description indicates it is limited to notification-block definitions rather than a rich set of pollable data objects, so a concrete GET-based polling scenario cannot be described with confidence. In practice, the notifications defined here would fire on events such as a rectifier module failing or an AC input being lost, alerting operators to a power-system fault without requiring constant polling.

What Can Be Monitored

rectifier module fault notifications
AC-to-DC output alarm conditions
power system fault alarms

Imported Objects

From ALPHA-RESOURCE-MIB

ScaledNumber
simple	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
rectifierSystem	1.3.6.1.4.1.7309.5.3.1			This MIB defines the notification block(s) available in system controllers.
SCA rectSysTotalOutputCurrent	1.3.6.1.4.1.7309.5.3.1.1	ScaledNumber	read-only	Total accumulated output current of all the rectifiers associated with the current system.
SCA rectSysTotalOutputPower	1.3.6.1.4.1.7309.5.3.1.2	ScaledNumber	read-only	Total output current of all system rectifiers.
SCA rectSysTotalCapacityInstalledAmps	1.3.6.1.4.1.7309.5.3.1.3	ScaledNumber	read-only	A rectifier output current multiplied by the number of rectifiers installed.
SCA rectSysTotalCapacityInstalledPower	1.3.6.1.4.1.7309.5.3.1.4	ScaledNumber	read-only	A rectifier output power multiplied by the number of rectifiers installed.
SCA rectSysAverageRectifierOutputVoltage	1.3.6.1.4.1.7309.5.3.1.5	ScaledNumber	read-only	Average rectifier output voltage.
SCA rectSysAverageRectifierACInputVoltage	1.3.6.1.4.1.7309.5.3.1.6	ScaledNumber	read-only	Average rectifier input voltage.
SCA rectSysAveragePhase1Voltage	1.3.6.1.4.1.7309.5.3.1.7	ScaledNumber	read-only	Average output voltage of rectifiers in Phase 1.
SCA rectSysAveragePhase2Voltage	1.3.6.1.4.1.7309.5.3.1.8	ScaledNumber	read-only	Average output voltage of rectifiers in Phase 2.
SCA rectSysAveragePhase3Voltage	1.3.6.1.4.1.7309.5.3.1.9	ScaledNumber	read-only	Average output voltage of rectifiers in Phase 3.
SCA rectSysSystemVoltage	1.3.6.1.4.1.7309.5.3.1.10	ScaledNumber	read-only	System voltage.
SCA rectSysTotalLoadCurrent	1.3.6.1.4.1.7309.5.3.1.11	ScaledNumber	read-only	Total load current.
SCA rectSysBatteryVoltage	1.3.6.1.4.1.7309.5.3.1.12	ScaledNumber	read-only	Battery voltage.
SCA rectSysBatteryCurrent	1.3.6.1.4.1.7309.5.3.1.13	ScaledNumber	read-only	Battery current.
SCA rectSysBatteryTemperature	1.3.6.1.4.1.7309.5.3.1.14	ScaledNumber	read-only	Battery temperature.
SCA rectSysSystemNumber	1.3.6.1.4.1.7309.5.3.1.15	ScaledNumber	read-only	Snmp ID# assigned to the system.
compliances	1.3.6.1.4.1.7309.5.3.1.100.1
compliance	1.3.6.1.4.1.7309.5.3.1.100.1.1			The compliance statement for systems supporting the alpha MIB.
rectifierGroups	1.3.6.1.4.1.7309.5.3.1.100.2
rectifierGroup	1.3.6.1.4.1.7309.5.3.1.100.2.1			Alpha Rectifier System data list group.

RFC description

Manages system controller notifications and output metrics for Alpha Technologies rectifier systems.

Start monitoring Alpha Technologies Cordex power system controllers (rectifier) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALPHA-RECTIFIER-SYS-MIB

What Is ALPHA-RECTIFIER-SYS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description