ALCATEL-ISIS-MIB :: vRtrIsisSpfSecondWait

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-ISIS-MIBvRtrIsisSpfSecondWait

vRtrIsisSpfSecondWait

Module: ALCATEL-ISIS-MIB

OID (symbolic): ALCATEL-ISIS-MIB::vRtrIsisSpfSecondWait

OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The value of vRtrIsisSpfInitialWait defines the hold time between the first and second SPF calculation (in milliseconds).

Subsequent SPF runs will occur at exponentially increasing intervals of spf-second-wait i.e. if spf-second-wait is 1000, then the next SPF will run after 2000 msec, the next one at 4000 msec etc until it is capped off at spf-wait value.

The SPF interval will stay at spf-wait value until there are no more SPF runs scheduled in that interval. After a full interval without any SPF runs, the SPF interval will drop back to spf-initial-wait.

What is vRtrIsisSpfSecondWait?

Sets the hold time in milliseconds between the first and second SPF calculations; subsequent calculations are delayed by exponentially increasing multiples of this value. This exponential back-off reduces CPU usage when the network is undergoing repeated changes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21
snmpwalk -v2c -c public <target> ALCATEL-ISIS-MIB::vRtrIsisSpfSecondWait

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21.1
snmpget -v2c -c public <target> ALCATEL-ISIS-MIB::vRtrIsisSpfSecondWait.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21.1 i <value>

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-ISIS-MIB::vRtrIsisSpfSecondWait OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.

OID Breakdown

Upper-level ancestors (18 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6486alcatelALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801alcatelIND1BaseMIBALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1alcatelIND1ManagementALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2managementIND1SoftwareALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1softwareIND1EntitiesALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10softentIND1RoutingALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10.14routingIND1ISISALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10.14.1timetraIsisMIBModuleALCATEL-IND1-ISIS-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10vRtrIsisObjsALCATEL-IND1-ISIS-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2vRtrIsisSystemObjsALCATEL-IND1-ISIS-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1vRtrIsisTableALCATEL-IND1-ISIS-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1vRtrIsisEntryALCATEL-IND1-ISIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6486.801.1.2.1.10.14.1.10.2.1.1.21vRtrIsisSpfSecondWaitALCATEL-ISIS-MIB