| OID symbolic | OID numeric | Type | Access | Description |
|---|
| INT agentARPClearAllState | 1.3.6.1.4.1.171.12.1.2.12.1 | INTEGER | read-write | Used to clear all ARP entries. |
| agentARPMgmt | 1.3.6.1.4.1.171.12.1.2.12 | | | |
| agentBasicConfig | 1.3.6.1.4.1.171.12.1.2 | | | |
| agentBasicInfo | 1.3.6.1.4.1.171.12.1.1 | | | |
| STR agentBscSwFile | 1.3.6.1.4.1.171.12.1.2.1.1.5 | DisplayString | read-write | The name of the file to be downloaded from the TFTP server, or to be uploaded
to. |
| IP agentBscSwFileAddr | 1.3.6.1.4.1.171.12.1.2.1.1.3 | IpAddress | read-write | The IP address where the File to be downloaded is located, or the IP address
where the file will be uploaded to. |
| INT agentBscSwFileCtrl | 1.3.6.1.4.1.171.12.1.2.1.1.8 | INTEGER | read-write | This object provides the user to download runtime software. The setting
will take effect when the system is restart. See Note(1) below
Note:
For system which does not support change of this object to some value,
setting object to these values cause the system to return
bad-value error message. |
| STR agentBscSwFileDscr | 1.3.6.1.4.1.171.12.1.2.1.1.2 | DisplayString | read-write | The description for the purpose of the software file in this entry.
Note:
For system which does not support change of this object, setting value to
this object will cause the system to return bad-value error message. |
| agentBscSwFileEntry | 1.3.6.1.4.1.171.12.1.2.1.1 | | not-accessible | A basic config entry contains objects describing a particular MIB
supported by this agent. |
| I32 agentBscSwFileIndex | 1.3.6.1.4.1.171.12.1.2.1.1.1 | Integer32 | read-write | The table index for the file entry |
| INT agentBscSwFileLoadType | 1.3.6.1.4.1.171.12.1.2.1.1.7 | INTEGER | read-write | This object provides the user to select download or upload function for the file.
Note:
For system which does not support change of this object, setting value to
this object will cause the system to return bad-value error message. |
| INT agentBscSwFileLocateId | 1.3.6.1.4.1.171.12.1.2.1.1.6 | INTEGER | read-write | This object describes the type of the file.
runtime-code(1),
log-file(2),
cfg-file(3)
Note:
For system which does not support change of this object, setting value to
this object will cause the system to return bad-value error message. |
| agentBscSwFileTable | 1.3.6.1.4.1.171.12.1.2.1 | | not-accessible | A list of MIB Basic Config entries supported file Update by this agent. |
| INT agentBscSwFileTransferType | 1.3.6.1.4.1.171.12.1.2.1.1.4 | INTEGER | read-write | The channel through which the file will be downloaded or uploaded.
Note:
For system which does not support all channels, setting value to the unsupported
channel will cause the system to return bad-value error message. |
| agentConsoleModeManager | 1.3.6.1.4.1.171.12.1.5 | | | |
| INT agentConsoleModeManagerBaudRate | 1.3.6.1.4.1.171.12.1.5.4 | INTEGER | read-write | The transmit rate for console mode.
Note:
Because these funiction will be limited by the system support. Some of the
select item will invalid. When one of the item user select,it will response with
bad-value status. |
| INT agentConsoleModeManagerDataBits | 1.3.6.1.4.1.171.12.1.5.1 | INTEGER | read-write | The DataBits for console mode, If the agentRs232PortConfig change to console mode
then the device will use this group to make a setup for console value and
agentSlipModeManager group will deactive automatically. |
| INT agentConsoleModeManagerLogoutTime | 1.3.6.1.4.1.171.12.1.5.5 | INTEGER | read-write | The time period of auto logout. |
| INT agentConsoleModeManagerParity | 1.3.6.1.4.1.171.12.1.5.3 | INTEGER | read-write | The Parity for console mode, If the agentRs232PortConfig change to console mode
then the device will use this group to make a setup for console value and
agentSlipModeManager group will deactive automatically. |
| INT agentConsoleModeManagerStopBits | 1.3.6.1.4.1.171.12.1.5.2 | INTEGER | read-write | The Stop Bits for console mode |
| INT agentFDBClearAllState | 1.3.6.1.4.1.171.12.1.2.11.1 | INTEGER | read-write | Used to clear all FDB entries. |
| agentFDBMgmt | 1.3.6.1.4.1.171.12.1.2.11 | | | |
| INT agentFileTransfer | 1.3.6.1.4.1.171.12.1.2.2 | INTEGER | read-write | This object will execute the download or upload action. If start(2), it will
begin to download/upload, but no reset as follow. If start-and-reset(3), then
the reset will active after download or upload. No action if(4).
Note:
Because these funiction will be limited by the system support. Some of the
select item will invalid. When one of the item user select,it will response with
bad-value status. |
| agentGeneralMgmt | 1.3.6.1.4.1.171.12.1 | | | The Structure of Common Management Information for the
D-Link enterprise. |
| INT agentIpGetIpFrom | 1.3.6.1.4.1.171.12.1.3.3 | INTEGER | read-write | This object indicates whether the agent get its system IP address
from Bootp/DHCP server at start up. |
| I32 agentIpNumOfIf | 1.3.6.1.4.1.171.12.1.3.1 | Integer32 | read-only | The total number of IP interfaces supported by this agent. |
| agentIpProtoConfig | 1.3.6.1.4.1.171.12.1.3 | | | |
| IP agentIpTftpServerAddr | 1.3.6.1.4.1.171.12.1.3.2 | IpAddress | read-write | The IP Address of TFTP Server. |
| INT agentMgmtProtocolCapability | 1.3.6.1.4.1.171.12.1.1.1 | INTEGER | read-only | The network management protocol(s) supported by this agent. |
| STR agentMibCapabilityDescr | 1.3.6.1.4.1.171.12.1.1.2.1.2 | DisplayString | read-only | The name of the MIB supported by the agent. |
| agentMibCapabilityEntry | 1.3.6.1.4.1.171.12.1.1.2.1 | | not-accessible | A MIB capability entry contains objects describing a particular MIB
supported by this agent. |
| I32 agentMibCapabilityIndex | 1.3.6.1.4.1.171.12.1.1.2.1.1 | Integer32 | read-only | A list of agentMibCapabilityDescr entries. |
| agentMibCapabilityTable | 1.3.6.1.4.1.171.12.1.1.2 | | not-accessible | A list of MIB capability entries supported by this agent. |
| INT agentMibCapabilityType | 1.3.6.1.4.1.171.12.1.1.2.1.4 | INTEGER | read-only | The type of the MIB specified in this entry. |
| I32 agentMibCapabilityVersion | 1.3.6.1.4.1.171.12.1.1.2.1.3 | Integer32 | read-only | The version of the MIB specified in this entry. |
| INT agentOutOfBandBaudRateConfig | 1.3.6.1.4.1.171.12.1.2.5 | INTEGER | read-write | This object allows user to specify out_of_band baud rate. It will take effect
when the system is restart.
Note:
Because these funiction will be limited by the system support. Some of the
select item will invalid. When one of the item user select,it will response with
bad-value status. |
| agentPORTutilizationEntry | 1.3.6.1.4.1.171.12.1.1.8.1 | | not-accessible | A list of information regarding the port utilization function. |
| INT agentPORTutilizationProtIndex | 1.3.6.1.4.1.171.12.1.1.8.1.1 | INTEGER | read-only | This object indicates the module's port number. |
| INT agentPORTutilizationRX | 1.3.6.1.4.1.171.12.1.1.8.1.3 | INTEGER | read-only | The current rate of received frames on the specified port. |
| agentPORTutilizationTable | 1.3.6.1.4.1.171.12.1.1.8 | | not-accessible | This table specifies the current utilization of a specified port. |
| INT agentPORTutilizationTX | 1.3.6.1.4.1.171.12.1.1.8.1.2 | INTEGER | read-only | The current rate of transmitted frames on the specified port. |
| INT agentPORTutilizationUtil | 1.3.6.1.4.1.171.12.1.1.8.1.4 | INTEGER | read-only | The current percentages regarding port statistics. |
| INT agentRs232PortConfig | 1.3.6.1.4.1.171.12.1.2.4 | INTEGER | read-write | This object indicates the RS-232C mode while device restart. |
| INT agentSaveCfg | 1.3.6.1.4.1.171.12.1.2.6 | INTEGER | read-write | This indicates the current device saving type will be saved into to NV-RAM.
other(1) - none of the following.
cfg(3) - save configuration.
log(4) - save log.
all(5) - save both ( active configuration & log). |
| INT agentStatusConsoleInUse | 1.3.6.1.4.1.171.12.1.1.3 | INTEGER | read-only | This indicates whether console is currently in-use. |
| INT agentStatusFileTransfer | 1.3.6.1.4.1.171.12.1.1.5 | INTEGER | read-only | status of firmware download control. If the value is 'other',
means never firmware updated since device started up. |
| INT agentStatusSaveCfg | 1.3.6.1.4.1.171.12.1.1.4 | INTEGER | read-only | This indicates the status of the device configuration.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each
of the following values.
proceeding(2) - the device configuration is being currently saved into the NV-RAM.
completed(3) �V all of the device configuration parameters have been
saved into NV-RAM.
changed-not-save(4)�V some of the device configuration parameters have
been changed but not saved into NV-RAM.
failed(5) - The process to save device configuration is failed. |
| INT agentSystemReset | 1.3.6.1.4.1.171.12.1.2.3 | INTEGER | read-write | This object indicates the agent system reset state. Setting this
object to no-reset(4) has no effect. Setting this object to
cold-start(2) or warm-start(3) will reset the agent. The agent
always returns no-reset(4) when this object is read. |
| INT agentTrustHostDelAllState | 1.3.6.1.4.1.171.12.1.2.10.2 | INTEGER | read-write | Used to delete all Trust Host entries. |
| agentTrustHostEntry | 1.3.6.1.4.1.171.12.1.2.10.1.1 | | not-accessible | A list of information about Trust Host. |
| INT agentTrustHostIndex | 1.3.6.1.4.1.171.12.1.2.10.1.1.1 | INTEGER | read-only | The index of Trust Host entry. |
| IP agentTrustHostIPAddress | 1.3.6.1.4.1.171.12.1.2.10.1.1.2 | IpAddress | read-create | Specifies the IP address of the Trust Host. |
| IP agentTrustHostIPSubnetMask | 1.3.6.1.4.1.171.12.1.2.10.1.1.4 | IpAddress | read-create | Specifies the IP subnet mask of the Trust Host. |
| agentTrustHostMgmt | 1.3.6.1.4.1.171.12.1.2.10 | | | |
| ROW agentTrustHostRowStatus | 1.3.6.1.4.1.171.12.1.2.10.1.1.3 | RowStatus | read-create | Indicates the status of this entry. When creating a Trust Host
entry, the IP address should be set, too. |
| agentTrustHostTable | 1.3.6.1.4.1.171.12.1.2.10.1 | | not-accessible | This table contains Trust Host information. |
