ADVANTECH-COMMON-MIB

All MIBs › ADVANTECH-COMMON-MIB

Organization: Advantech eAutomation Group

Last Updated: 2015-01-06

Category: Hardware and Environment

Description: Establishes common management objects and enterprise OID registration for Advantech industrial networking equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADVANTECH-COMMON-MIB?

ADVANTECH-COMMON-MIB is Advantech's enterprise root/common MIB establishing the OID registration tree and shared definitions used across Advantech's industrial automation networking equipment. It primarily defines the organizational structure (system, management, PCI configuration branches) under which Advantech's product-specific MIBs register their objects, rather than exposing runtime monitoring data itself. As a common/root MIB it typically has no operational status objects of its own, though the product MIBs built on top of it (for Advantech's industrial switches, gateways, or I/O modules) would expose hardware/software status such as uptime and port state. It serves as the dependency root that all other Advantech-specific MIBs build upon. It is used across Advantech's industrial automation device families deployed in factory and IoT edge environments. Engineers can download the ADVANTECH-COMMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADVANTECH-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Advantech industrial automation device

Monitoring Examples

The sample_objects (advantech, atSystem, atMgmt, atPciConfig) are all top-level OID branch identifiers rather than runtime data objects, confirming this is a common/root MIB defining organizational structure, not one that itself carries pollable status or performance data. Actual monitoring would occur through product-specific Advantech MIBs registered underneath these branches.

Imported Objects

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC-v1

DateAndTime
DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
advantech	1.3.6.1.4.1.10297
advantechCommonMIB	1.3.6.1.4.1.10297.100			The MIB module is for Advantech automation devices common entities. Copyright (C) 2015 Advantech Automation Group.
atSystem	1.3.6.1.4.1.10297.100.1
STR sysModuleID	1.3.6.1.4.1.10297.100.1.1	DisplayString	read-only	The module name of the device. This value should include the full name of the hardware. It is mandatory that this only contain printable ASCII characters. e.g. UNO-2184G, TPC-1840WP. etc,.
STR sysDeviceName	1.3.6.1.4.1.10297.100.1.2	DisplayString	read-write	The user defined name of the device, e.g. alias name, may be its device location.
STR sysDescr	1.3.6.1.4.1.10297.100.1.3	DisplayString	read-write	A textual description of the entity/device that this only contain printable ASCII characters.
OCT sysImageVersion	1.3.6.1.4.1.10297.100.1.4	OCTET STRING	read-only	The release version number of the entity/device.
OCT sysReleaseDate	1.3.6.1.4.1.10297.100.1.5	OCTET STRING	read-only	The release date of the entity/device.
DAT sysFirstBootTime	1.3.6.1.4.1.10297.100.1.6	DateAndTime	read-only	The first boot time since the entity/device was started it will be reset if the device cleaned all files and registry with clean boot. A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 If this information is not known, then this variable shall have the value corresponding to January 1, year 0000, 00:00:00.0, which is encoded as (hex)'00 00 01 01 00 00 00 00'.
DAT sysBootTime	1.3.6.1.4.1.10297.100.1.7	DateAndTime	read-only	The time since the entity/device was last re-initialized. A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 If this information is not known, then this variable shall have the value corresponding to January 1, year 0000, 00:00:00.0, which is encoded as (hex)'00 00 01 01 00 00 00 00'.
C32 sysBootCount	1.3.6.1.4.1.10297.100.1.8	Counter32	read-only	The boot count since the entity/device was first boot.
atMgmt	1.3.6.1.4.1.10297.100.2
snmpTrapSrvObj	1.3.6.1.4.1.10297.100.2.1
I32 snmpTrapSrvNumber	1.3.6.1.4.1.10297.100.2.1.1	Integer32	read-only	The number of the snmpTrapSrvTable
snmpTrapSrvTable	1.3.6.1.4.1.10297.100.2.1.2		not-accessible	The (conceptual) table listing the information of the remote SNMP Trap server acting as a trap receiver.
snmpTrapSrvEntry	1.3.6.1.4.1.10297.100.2.1.2.1		not-accessible	SNMP Trap server entry. Contains the IP address of a SNMP Trap server
INT snmpTrapSrvIndex	1.3.6.1.4.1.10297.100.2.1.2.1.1	INTEGER	read-only	This object contains the index of the table being a unique value for each entry.
IP snmpTrapSrvIP	1.3.6.1.4.1.10297.100.2.1.2.1.2	IpAddress	read-write	This parameter specifies the IP address of the SNMP Trap Server.
INT snmpTrapSrvPort	1.3.6.1.4.1.10297.100.2.1.2.1.3	INTEGER	read-write	The port number for the SNMP Trap Server.
INT snmpTrapSrvAuthentication	1.3.6.1.4.1.10297.100.2.1.2.1.4	INTEGER	read-write	This parameter enables authentication traps.
STR snmpTrapSrvCommunity	1.3.6.1.4.1.10297.100.2.1.2.1.5	DisplayString	read-write	This parameter specifies the SNMP community.
INT snmpTrapVersion	1.3.6.1.4.1.10297.100.2.1.2.1.6	INTEGER	read-write	This parameter specifies the SNMP trap version.
atPciConfig	1.3.6.1.4.1.10297.100.3
pciConfigObj	1.3.6.1.4.1.10297.100.3.1
I32 psNumber	1.3.6.1.4.1.10297.100.3.1.1	Integer32	read-only	The number of the psTable
pciSlotTable	1.3.6.1.4.1.10297.100.3.1.2		not-accessible	A list of PCI device/functions entries.
pciSlotEntry	1.3.6.1.4.1.10297.100.3.1.2.1		not-accessible	PCI slot entry. Contains the information of PCI devices.
INT psIndex	1.3.6.1.4.1.10297.100.3.1.2.1.1	INTEGER	read-only	This object contains the index of the table being a unique value for each entry.
INT psBusIndex	1.3.6.1.4.1.10297.100.3.1.2.1.2	INTEGER	read-only	The PCI Bus number
INT psDeviceIndex	1.3.6.1.4.1.10297.100.3.1.2.1.3	INTEGER	read-only	The PCI device or slot number that this entry describes.
INT psFunctionIndex	1.3.6.1.4.1.10297.100.3.1.2.1.4	INTEGER	read-only	The PCI function number that this entry describes.
STR psDisplayName	1.3.6.1.4.1.10297.100.3.1.2.1.5	SnmpAdminString	read-only	Service name of the PCI device. e.g. Intel 82579LM Gigabit Network Connection
STR psDescr	1.3.6.1.4.1.10297.100.3.1.2.1.6	SnmpAdminString	read-only	PCI device description
INT psVendorID	1.3.6.1.4.1.10297.100.3.1.2.1.7	INTEGER	read-only	Identifies the manufacturer of the device. 65535(0xFFFF) is an invalid value for a vendor ID. Vendor ID Manufacturer ------------- ------------ 5118(0x13FE) Advantech Co.
INT psDeviceID	1.3.6.1.4.1.10297.100.3.1.2.1.8	INTEGER	read-only	Identifies the particular device. This identier is allocated by the vendor. The following is the Advantech PCI Device ID. Device ID Description ------------- ----------------------- 49154(0xC002) CAN 2 Ports(I/O) 49666(0xC202) CAN 2 Ports(memory) 49410(0xC102) CANopen 2 ports(I/O) 49666(0xC202) CANopen 2 ports(memory) 4097(0x1001) NVRAM 40964(0xA004) COM950 4 Ports 61952(0xF200) PCIe 2 COM950 Ports 62208(0xF300) PCIe 4 COM950 Ports 62464(0xF400) PCIe 8 COM950 Ports 43041(0xA821) PCIe 1 COM17V25x Port 43042(0xA822) PCIe 2 COM17V25x Ports 43043(0xA823) PCIe 3 COM17V25x Ports 43044(0xA824) PCIe 4 COM17V25x Ports 43048(0xA828) PCIe 8 COM17V25x Ports 43057(0xA831) PCIe 1 COM17V35x Port 43058(0xA832) PCIe 2 COM17V35x Ports 43059(0xA833) PCIe 3 COM17V35x Ports 43060(0xA834) PCIe 4 COM17V35x Ports 43064(0xA838) PCIe 8 COM17V35x Ports
INT psSubsysVendorID	1.3.6.1.4.1.10297.100.3.1.2.1.9	INTEGER	read-only	Identifies the manufacturer subsystem of the device. 65535(0xFFFF) is an invalid value for a vendor ID. Subsys Vendor ID Manufacturer ---------------- ------------ 5118(0x13FE) Advantech Co.
INT psSubsysDeviceID	1.3.6.1.4.1.10297.100.3.1.2.1.10	INTEGER	read-only	Identifies the particular device subsystem. This identier is allocated by the vendor. Subsystem Device ID Description ------------------- -------------------------------------- 4097(0x1001) NVRAM with KW 4113(0x1011) NVRAM without KW
OCT psClassCode	1.3.6.1.4.1.10297.100.3.1.2.1.11	OCTET STRING	read-only	Identifies the generic function of the device. Base Sub- Prog Class Class If. Description ------ ------ ------ -------------------------------------- 00h Device was built before Class Code definitions were finalized
STR psManufacturer	1.3.6.1.4.1.10297.100.3.1.2.1.12	SnmpAdminString	read-only	The manufacturer name of the PCI device
STR psLocation	1.3.6.1.4.1.10297.100.3.1.2.1.13	SnmpAdminString	read-only	The location information consists of PCI bus number, device number, and function. e.g. PCI bus 0, device 0, funciton 0
OCT psBaseAddress	1.3.6.1.4.1.10297.100.3.1.2.1.14	OCTET STRING	read-only	Base address mapping registers for memory and IO. Refer to the PCI specification for the format. A memory or IO address is encoded as hex. For example: A memory start address 0xF7E00000 will be encoded as (hex)00 00 00 00 F7 E0 00 00. According to the PCI specification, The IO address bit 0 will be 1. An IO address 0xE800 will be encoded as (hex)00 00 00 00 00 00 E8 01.
OCT psLength	1.3.6.1.4.1.10297.100.3.1.2.1.15	OCTET STRING	read-only	The length of each PCI resource. It will be encoded as hex. For example: Length 0x20000 will be encoded as (hex) 00 00 00 00 00 02 00 00
INT psIRQ	1.3.6.1.4.1.10297.100.3.1.2.1.16	INTEGER	read-only	which interrupt pin the device uses.
INT psState	1.3.6.1.4.1.10297.100.3.1.2.1.17	INTEGER	read-only	The PCI device enable status
INT psModuleType	1.3.6.1.4.1.10297.100.3.1.2.1.18	INTEGER	read-only	The module function type
I32 psModulePorts	1.3.6.1.4.1.10297.100.3.1.2.1.19	Integer32	read-only	The port/ring/axis total number ports of the module

RFC description

Defines common management objects and enterprise OID registration for Advantech industrial networking equipment.

Start monitoring Advantech industrial networking equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADVANTECH-COMMON-MIB

What Is ADVANTECH-COMMON-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description