ADTRAN-ACTDAXL3-MIB :: adDAXFromTC

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADTRAN-ACTDAXL3-MIBadDAXFromTC

adDAXFromTC

Module: ADTRAN-ACTDAXL3-MIB

OID (symbolic): ADTRAN-ACTDAXL3-MIB::adDAXFromTC

OID (numeric): 1.3.6.1.4.1.664.2.9.4.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The trunk conditioning bits that will be inserted in the From channel in place of received signaling bits during an alarm state on the To channel port. The first two bits will be inserted for the A-bit and B-bit, respectively, during the first 2.5 seconds of the alarm. The second two bits will be inserted for the A-bit and B-bit, respectively, after the first 2.5 seconds of the alarm until the alarm clears. For example, if '0110' is chosen, then during the first 2.5 seconds of the alarm the A-bit will be '0' and the B-bit will be '1'. After the first 2.5 seconds the A-bit will be '1' and the B-bit will be '0'.

What is adDAXFromTC?

This defines trunk conditioning bits inserted in the from-channel during alarms on the to-channel: different bits for first 2.5 seconds and after. Trunk conditioning allows signaling control during failure states. You set this to maintain signal state during link failures.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.2.9.4.1.11
snmpwalk -v2c -c public <target> ADTRAN-ACTDAXL3-MIB::adDAXFromTC

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.664.2.9.4.1.11.1
snmpget -v2c -c public <target> ADTRAN-ACTDAXL3-MIB::adDAXFromTC.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.664.2.9.4.1.11.1 i <value>

Start monitoring ADTRAN ACTDAX DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-ACTDAXL3-MIB::adDAXFromTC OID value, configure state conditions and alerts, and monitor any ADTRAN ACTDAX DSL access equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.664adtranADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2adMgmtADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9adACTDAXL3mgADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9.4adDAX3connTableADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9.4.1adDAX3connEntryADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9.4.1.11adDAXFromTCADTRAN-ACTDAXL3-MIB