All MIBs › ADTRAN-ACTDAXL3-MIB › adDAX3trunkProcessMode
adDAX3trunkProcessMode
Module: ADTRAN-ACTDAXL3-MIB
OID (symbolic): ADTRAN-ACTDAXL3-MIB::adDAX3trunkProcessMode
OID (numeric): 1.3.6.1.4.1.664.2.9.2.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This item indicates how trunk processing will be initiated towards the channel units in the ACT bank in response to a DS1 alarm. This item changes based on the cross-connect matrix configuration.
'liuA' indicates that all connected digroup channels connected to DS1 Line A and are configured as full transparent connections. For an alarm on DS1 Line A the normal bank facilities for trunk conditioning and CGA code insertion will be used.
'liuB' indicates that all connected digroup channels connected to DS1 Line B and are configured as full transparent connections. For an alarm on DS1 Line B the normal bank facilities for trunk conditioning and CGA code insertion will be used.
'dax' indicates a cross connect matrix configuration other than that for 'liuA' or 'liuB'. The ACT DAX will initiate trunk processing toward all the DS0 channels in the digroup on a channel by channel basis.
What is adDAX3trunkProcessMode?
This read-only value shows how the device handles trunk processing during DS1 alarms, based on the cross-connect configuration. Values are dax (default), liuA (line interface unit A), or liuB (line interface unit B). It determines which physical path processes channel units when a DS1 line fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.2.9.2.15 snmpwalk -v2c -c public <target> ADTRAN-ACTDAXL3-MIB::adDAX3trunkProcessMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.664.2.9.2.15.1 snmpget -v2c -c public <target> ADTRAN-ACTDAXL3-MIB::adDAX3trunkProcessMode.1
Start monitoring ADTRAN ACTDAX DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-ACTDAXL3-MIB::adDAX3trunkProcessMode OID value, configure state conditions and alerts, and monitor any ADTRAN ACTDAX DSL access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.664 | adtran | ADTRAN-ACTDAXL3-MIB |
| 1.3.6.1.4.1.664.2 | adMgmt | ADTRAN-ACTDAXL3-MIB |
| 1.3.6.1.4.1.664.2.9 | adACTDAXL3mg | ADTRAN-ACTDAXL3-MIB |
| 1.3.6.1.4.1.664.2.9.2 | adDAX3config | ADTRAN-ACTDAXL3-MIB |
| 1.3.6.1.4.1.664.2.9.2.15 | adDAX3trunkProcessMode | ADTRAN-ACTDAXL3-MIB |