ADTRAN-ACTDAXL3-MIB :: adDAX3LineArm

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADTRAN-ACTDAXL3-MIBadDAX3LineArm

adDAX3LineArm

Module: ADTRAN-ACTDAXL3-MIB

OID (symbolic): ADTRAN-ACTDAXL3-MIB::adDAX3LineArm

OID (numeric): 1.3.6.1.4.1.664.2.9.7.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This bit map variable arms or disarms an individual or group of events identified in adDAX3LineStatus as a source for generation of DS1 Alarm Trap.

The various arm event bit positions are: 1 Far end LOF ( a.k.a., Yellow Alarm ) 2 Near end sending LOF Indication 4 Far end sending AIS ( Blue Alarm ) 8 Near end sending AIS 16 Near end LOF ( a.k.a., Red Alarm ) 32 Near end Loss Of Signal 64 Near end Local Loopback 128 Near end Line Loopback 256 Near end Payload Loopback 512 Far end Requested Line Loopback 1024 Far end Requested Payload Loopback 2048 Far end in Line Loopback (commanded from near end) 4096 Far end in Payload Loopback (commanded from near end)

What is adDAX3LineArm?

This bitmapped variable lets you selectively arm DS1 line alarms to trigger trap generation; bits match LineStatus positions. You set individual bits to enable alerts for specific fault types. For example, enabling bit 1 triggers alerts when far-end loss-of-frame occurs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.2.9.7.1.3
snmpwalk -v2c -c public <target> ADTRAN-ACTDAXL3-MIB::adDAX3LineArm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.664.2.9.7.1.3.1
snmpget -v2c -c public <target> ADTRAN-ACTDAXL3-MIB::adDAX3LineArm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.664.2.9.7.1.3.1 i <value>

Start monitoring ADTRAN ACTDAX DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-ACTDAXL3-MIB::adDAX3LineArm OID value, configure state conditions and alerts, and monitor any ADTRAN ACTDAX DSL access equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.664adtranADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2adMgmtADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9adACTDAXL3mgADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9.7adDAX3ds1EventTableADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9.7.1adDAX3ds1EventEntryADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2.9.7.1.3adDAX3LineArmADTRAN-ACTDAXL3-MIB