All MIBs › ACC-V25
Category: Vendor: ACC/Ericsson
Description:
Manages V.25bis dial control and modem interface parameters on ACC/Ericsson routers for PSTN and ISDN connectivity.
Imported Objects
From ACC-MIB
| DisplayString | |
| IfIndex | |
| RowStatus | |
| SmdsAddress | |
| accBRG | OBJECT-IDENTITY |
From ACC-SYSTEM
| accTrapLogSeqNum | OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| OBJECT-TYPE | |
| TimeTicks |
What Is ACC-V25?
ACC-V25 is a legacy ACC (Advanced Computer Communications) proprietary MIB reporting V.25bis auto-dial modem status on ACC access equipment. Its statistics table, keyed by interface index, records current dialing state, DTR/DSR/CTS control-lead signal state, and cumulative call-attempt and call-success counts. As a hardware/performance-status MIB it lets an administrator watch call-success rate against call attempts to diagnose an unreliable dial-backup line. It is deployed on legacy ACC access equipment using V.25bis dialing. Engineers can download the ACC-V25 file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-V25. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- V.25bis dial call attempt/success rate and control-lead state
Supported Devices
- Legacy ACC access equipment (V.25bis dialing)
Monitoring Examples
An administrator compares accV25CallSuccess against accV25CallAttempts to gauge the reliability of a V.25bis dial-backup line on legacy ACC equipment.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| accV25 | 1.3.6.1.4.1.5.1.1.37 | |||
| accV25StatTable | 1.3.6.1.4.1.5.1.1.37.1 | not-accessible | A list of Physical Port Entries that are doing V25Bis Dialing. | |
| accV25StatEntry | 1.3.6.1.4.1.5.1.1.37.1.1 | not-accessible | A table entry providing information about a specific port that is using V25Bis as the dialing procedure. | |
| INT accV25IntIndex | 1.3.6.1.4.1.5.1.1.37.1.1.1 | INTEGER | read-only | This is the port which is currently doing the V25 Bis dialing. |
| INT accV25CurState | 1.3.6.1.4.1.5.1.1.37.1.1.2 | INTEGER | read-only | This is the current state of the state machine. |
| INT accV25DTRSignal | 1.3.6.1.4.1.5.1.1.37.1.1.3 | INTEGER | read-only | This is the current state of the 108/2 circuit. |
| INT accV25DSRSignal | 1.3.6.1.4.1.5.1.1.37.1.1.4 | INTEGER | read-only | This is the current state of the 107 circuit. |
| INT accV25CTSSignal | 1.3.6.1.4.1.5.1.1.37.1.1.5 | INTEGER | read-only | This is the current state of the 106 circuit. |
| INT accV25CallAttempts | 1.3.6.1.4.1.5.1.1.37.1.1.6 | INTEGER | read-only | The number of Call Attempts made for the current destination. |
| INT accV25CallSuccess | 1.3.6.1.4.1.5.1.1.37.1.1.7 | INTEGER | read-only | The number of Call Attempts which were successful for the current destination. |
RFC description
V.25bis dialing protocol status and modem signal control for asynchronous dial connections.
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.