ACC-SNTP

All MIBs › ACC-SNTP

Category: Vendor: ACC/Ericsson

Description: Configures and monitors the Simple Network Time Protocol (SNTP) client on ACC/Ericsson routers for time synchronization.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACC-SNTP?

ACC-SNTP is a vendor-specific SNMP module for ACC/Ericsson access routers that configures and monitors the router's Simple Network Time Protocol (SNTP) client used for time synchronization. It exposes configuration objects (such as SNTP server addresses and sync intervals) and status objects reflecting whether the device's clock is synchronized. Its monitoring value is a software/service health check: confirming the router's system clock remains synchronized to a trusted time source, which matters for accurate event/log timestamps and coordinated operations across a network. It relates conceptually to the standard SNTP/NTP protocol (RFC 4330 and predecessors) even though implemented as a proprietary MIB. It is typically used in ACC router deployments where accurate time synchronization is needed for logging, billing, or call detail record correlation. Engineers can download the ACC-SNTP file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-SNTP. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ACC/Ericsson access router

Monitoring Examples

No sample object names were extracted for this module. An administrator would generally poll this MIB's synchronization status object to confirm the router's clock is locked to its configured SNTP server, which would reveal clock drift or a failed time-sync if the status indicates unsynchronized. Concrete object names should be verified against the actual MIB source since none were supplied here.

What Can Be Monitored

SNTP server configuration
time synchronization status
clock drift/sync interval

Imported Objects

From ACC-MIB

DisplayString
IfIndex
RowStatus
SmdsAddress
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accTrapLogSeqNum

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
OBJECT-TYPE
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
accSntp	1.3.6.1.4.1.5.1.1.88
accSntpGeneralScalars	1.3.6.1.4.1.5.1.1.88.1
INT accSntpAdminState	1.3.6.1.4.1.5.1.1.88.1.1	INTEGER	read-write	SNTP Adminstrative state.
INT accSntpBroadcastMode	1.3.6.1.4.1.5.1.1.88.1.2	INTEGER	read-write	SNTP Broadcast Mode.
INT accSntpMessageLevel	1.3.6.1.4.1.5.1.1.88.1.3	INTEGER	read-write	SNTP Message Level
INT accSntpDebugMask	1.3.6.1.4.1.5.1.1.88.1.4	INTEGER	read-write	SNTP Debug Mask
CTR accSntpStatInPackets	1.3.6.1.4.1.5.1.1.88.1.5	Counter	read-only	Indicates the total number of SNTP packets received from all SNTP server ,both unicast and multicast packets.
CTR accSntpStatOutPackets	1.3.6.1.4.1.5.1.1.88.1.6	Counter	read-only	Indicates the total number of SNTP Unicast packets sent to all SNTP server.
CTR accSntpStatInDiscards	1.3.6.1.4.1.5.1.1.88.1.7	Counter	read-only	Indicates the total number of SNTP packets discarded from all SNTP server ,both unicast and multicast packets.
CTR accSntpStatInBcastPackets	1.3.6.1.4.1.5.1.1.88.1.8	Counter	read-only	Indicates the total number of SNTP packets recvd from all SNTP server ,only multicast/broadcast packets.
OCT accSntpLastBcastPacTime	1.3.6.1.4.1.5.1.1.88.1.9	OCTET STRING	read-only	The Time at which the Last Sntp Broadcast message was recieved.
IP accSntpLastBcastPacSrcAddr	1.3.6.1.4.1.5.1.1.88.1.10	IpAddress	read-only	The Source Address from which the Last Sntp Broadcast message was recieved.
CTR accSntpStatQueryTimeouts	1.3.6.1.4.1.5.1.1.88.1.11	Counter	read-only	Indicates the total number of failed SNTP Unicast packets sent to all SNTP server.
accSntpSever	1.3.6.1.4.1.5.1.1.88.2
accSntpSeverTable	1.3.6.1.4.1.5.1.1.88.2.1		not-accessible	Displays all Sntp Server entries.
accSntpSeverEntry	1.3.6.1.4.1.5.1.1.88.2.1.1		not-accessible
INT accSntpServIndex	1.3.6.1.4.1.5.1.1.88.2.1.1.1	INTEGER	read-write	The Index of the Sntp Server Entry.
IP accSntpServAddr	1.3.6.1.4.1.5.1.1.88.2.1.1.2	IpAddress	read-write	The remote IP Address of the Sntp Server.
INT accSntpServAdminState	1.3.6.1.4.1.5.1.1.88.2.1.1.3	INTEGER	read-write	The Admin State of the remote IP Address of the Sntp Server.
INT accSntpServPollInt	1.3.6.1.4.1.5.1.1.88.2.1.1.4	INTEGER	read-write	SNTP Server Poll Interval
INT accSntpServRetryCnt	1.3.6.1.4.1.5.1.1.88.2.1.1.5	INTEGER	read-write	SNTP Server Retry Count
INT accSntpServRetryInt	1.3.6.1.4.1.5.1.1.88.2.1.1.6	INTEGER	read-write	SNTP Server Retry Interval
INT accSntpServRecInt	1.3.6.1.4.1.5.1.1.88.2.1.1.7	INTEGER	read-write	SNTP Server Recovery Interval
INT accSntpServUdpPort	1.3.6.1.4.1.5.1.1.88.2.1.1.8	INTEGER	read-write	SNTP Server Retry Interval
OCT accSntpServLastResp	1.3.6.1.4.1.5.1.1.88.2.1.1.9	OCTET STRING	read-only	SNTP Server Last Response Time
INT accSntpServOperState	1.3.6.1.4.1.5.1.1.88.2.1.1.10	INTEGER	read-write	The Operational State of the remote IP Address of the Sntp Server.
CTR accSntpServInPackets	1.3.6.1.4.1.5.1.1.88.2.1.1.11	Counter	read-only	The number of SNTP response packets recieved from Remote SNTP server
CTR accSntpServOutPackets	1.3.6.1.4.1.5.1.1.88.2.1.1.12	Counter	read-only	The number of SNTP requests packets sent to the remote SNTP server
CTR accSntpServInDiscards	1.3.6.1.4.1.5.1.1.88.2.1.1.13	Counter	read-only	The number of packets discarded packets from the SNTP server
ROW accSntpServEntryStatus	1.3.6.1.4.1.5.1.1.88.2.1.1.14	RowStatus	read-write	The Row Status of the remote IP Address of the Sntp Server.
accSntpTraps	1.3.6.1.4.1.5.1.1.88.3
NTF accSntpUdpBindFailTrap1	1.3.6.1.4.1.5.1.1.88.3.0.1			When the Sntp UDP binding to port 123 is attempted, if this fails then this trap is generated. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accSntpTrapMsg } PCAUSE-DEFAULT: 4
NTF accSntpUdpUnBindFailTrap2	1.3.6.1.4.1.5.1.1.88.3.0.2			When the Sntp UDP unbinding to port 123 is attempted, if this fails then this trap is generated. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accSntpTrapMsg } PCAUSE-DEFAULT: 46
NTF accSntpServerDownTrap3	1.3.6.1.4.1.5.1.1.88.3.0.3			If the Sntp serve configured fails to respond of a a particular number of failed retries attempts this server is set to DOWN state and this trap is generated SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accSntpTrapMsg } PCAUSE-DEFAULT: 44
STR accSntpTrapMsg	1.3.6.1.4.1.5.1.1.88.3.1	DisplayString	read-only	Enterprise Trap Message for Sntp

RFC description

ACC SNTP (Simple Network Time Protocol) MIB for configuring time synchronization and monitoring statistics.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-SNTP

What Is ACC-SNTP?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description