ACC-PHONE

All MIBs › ACC-PHONE

Category: Telephony and VoIP, Vendor: ACC/Ericsson

Description: Manages analog telephone interface configuration on ACC/Ericsson integrated access devices, including FXS port settings and call signaling parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACC-PHONE?

ACC-PHONE is an enterprise MIB from ACC (later part of Ericsson) for managing analog telephone (FXS) interfaces on integrated access devices that combine data and voice service delivery. It is expected to expose configuration objects for analog line/port settings and call-signaling parameters (e.g. ring cadence, loop-current, dial-tone behavior) for each FXS port on the device. Its monitoring value centers on the software/telephony-service status of each analog port -- whether a line is on-hook/off-hook, in service, or reporting a signaling fault -- which is critical for voice-service assurance on these access devices. No module description or sample objects were available for this specific MIB, so its exact object model cannot be confirmed beyond its stated scope. It would be deployed on ACC/Ericsson integrated access devices at customer premises or in carrier access networks delivering POTS service alongside data. Engineers can download the ACC-PHONE file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-PHONE. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ACC/Ericsson integrated access devices with analog (FXS) telephone ports

Monitoring Examples

No sample objects were provided for this MIB, so specific object names cannot be cited; a realistic scenario would involve polling per-FXS-port status and signaling-fault objects to detect a line stuck off-hook or a port reporting a ringer/loop-current fault, which would explain a subscriber's inability to place or receive calls.

What Can Be Monitored

FXS port status
loop-current/signaling state
line configuration parameters

Imported Objects

From ACC-MIB

DisplayString
IfIndex
RowStatus
SmdsAddress
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accTrapLogSeqNum

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
OBJECT-TYPE
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
accPhoneGroup	1.3.6.1.4.1.5.1.1.50
accPhoneTable	1.3.6.1.4.1.5.1.1.50.1		not-accessible	Table containing configuration and operational parameters for all PHONE ports.
accPhoneTableEntry	1.3.6.1.4.1.5.1.1.50.1.1		not-accessible	An entry in the PHONE table.
INT accPhoneIndex	1.3.6.1.4.1.5.1.1.50.1.1.1	INTEGER	read-only	The instance of the PHONE port to be displayed.
STR accPhoneDestinationPort	1.3.6.1.4.1.5.1.1.50.1.1.2	DisplayString	read-only	The physical port to which this PHONE port is associated with. This value is the value of ifIndex for this physical port.
INT accPhoneHookStatus	1.3.6.1.4.1.5.1.1.50.1.1.3	INTEGER	read-only	The current status of the PHONE ports, indicating whether the PHONE is engaged in call activity or not Set this object to deleted to remove an entry from the phone table.
INT accPhoneRingConfn	1.3.6.1.4.1.5.1.1.50.1.1.4	INTEGER	read-write	The type of ring that needs to be sent to the PHONE port. Current types support North American and European switches.
STR accPhoneNumber	1.3.6.1.4.1.5.1.1.50.1.1.5	DisplayString	read-write	The telephone #s associated with this PHONE port.
STR accPhoneNumberStr	1.3.6.1.4.1.5.1.1.50.1.1.6	DisplayString	read-write	The telephone #s associated with this PHONE port. This is used in the custom display tables.
INT accPhoneAdminStatus	1.3.6.1.4.1.5.1.1.50.1.1.7	INTEGER	read-write	Admin status of the phone port.
INT accPhoneAnswerMode	1.3.6.1.4.1.5.1.1.50.1.1.8	INTEGER	read-write	When this is enabled incoming calls are allowed, otherwise if it is disabled then the incoming calls are not allowed.
INT accPhoneCallWaitingMode	1.3.6.1.4.1.5.1.1.50.1.1.9	INTEGER	read-write	When this is enabled incoming waiting calls are allowed, otherwise they are rejected.
accPhoneContainerTable	1.3.6.1.4.1.5.1.1.50.2		not-accessible	Table containing operational parameters for all phone port call containers.
accPhoneContainerTableEntry	1.3.6.1.4.1.5.1.1.50.2.1		not-accessible	An entry in the call container table.
INT accPhoneContainerIndex	1.3.6.1.4.1.5.1.1.50.2.1.1	INTEGER	read-only	The instance of the call container to be displayed.
INT accPhoneContainerPhonePort	1.3.6.1.4.1.5.1.1.50.2.1.2	INTEGER	read-only	The index of the phone port associated with this container.
INT accPhoneContainerStatus	1.3.6.1.4.1.5.1.1.50.2.1.3	INTEGER	read-only	The status of the call container.
INT accPhoneContainerCallRef	1.3.6.1.4.1.5.1.1.50.2.1.4	INTEGER	read-only	The ISDN call reference of the call associated with this container.
INT accPhoneContainerCallDir	1.3.6.1.4.1.5.1.1.50.2.1.5	INTEGER	read-only	The direction of the call associated with this container.

RFC description

Accton phone port configuration and status MIB; manages voice telephony interfaces including hook status, dialing, and call handling.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-PHONE

What Is ACC-PHONE?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description