A3COM-HUAWEI-PROTOCOL-VLAN-MIB

All MIBs › A3COM-HUAWEI-PROTOCOL-VLAN-MIB

Organization: Huawei 3Com Technology Co., Ltd.

Last Updated: 2004-08-31

Category: VLAN and Bridging, Vendor: H3C/HH3C

Description: Manages protocol-based VLAN assignment on H3C/3Com switches, allowing automatic VLAN classification of traffic based on L3 protocol type.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-PROTOCOL-VLAN-MIB?

A3COM-HUAWEI-PROTOCOL-VLAN-MIB manages protocol-based VLAN assignment on H3C/3Com switches, a Layer-2 feature that classifies untagged incoming frames into a VLAN based on their Layer-3 protocol type (such as IPv4, IPv6, or IPX) rather than port or 802.1Q tag alone. It is expected to expose per-port protocol-to-VLAN mapping configuration and the set of protocol templates recognized by the switch. As a Layer-2 configuration MIB it primarily supports monitoring of the switch's traffic-classification software state, confirming which protocol types are mapped to which VLAN on a given port, rather than physical hardware health. Dependency: it builds on the standard 802.1Q bridge VLAN model, adding H3C-specific protocol-based classification not present in the base bridge MIB. Deployment is on H3C/3Com access-layer switches in mixed-protocol environments needing automatic VLAN segregation without relying on explicit tagging. Engineers can download the A3COM-HUAWEI-PROTOCOL-VLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-PROTOCOL-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com LAN switches

Monitoring Examples

No specific object or table names were provided in the sampled source for this module, so a concrete OID-level example is not given here to avoid inventing identifiers. In practice an admin would poll the per-port protocol-VLAN mapping table to confirm, for instance, that legacy IPX traffic on a port is correctly isolated into its designated VLAN, and traffic appearing in the wrong VLAN would indicate a protocol-template misconfiguration on that port.

What Can Be Monitored

per-port protocol-to-VLAN mapping
configured protocol templates

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cProtocolVlan	1.3.6.1.4.1.43.45.1.10.2.16			This MIB contains the objects for managing the protocol-based vlan configurations.
h3cProtocolVlanOperate	1.3.6.1.4.1.43.45.1.10.2.16.1
I32 h3cProtocolNumAllVlan	1.3.6.1.4.1.43.45.1.10.2.16.1.1	Integer32	read-only	The maximum number of protocols that can be configured on all vlans. This number may vary with products.
I32 h3cProtocolNumPerVlan	1.3.6.1.4.1.43.45.1.10.2.16.1.2	Integer32	read-only	The maximum number of protocols that can be configured per vlan. This number may vary with products.
I32 h3cProtocolNumAllPort	1.3.6.1.4.1.43.45.1.10.2.16.1.3	Integer32	read-only	The maximum number of protocols that can be applied on all ports. This number may vary with products.
I32 h3cProtocolNumPerPort	1.3.6.1.4.1.43.45.1.10.2.16.1.4	Integer32	read-only	The maximum number of protocols that can be applied to each port. This number may vary with products.
h3cProtocolVlanTable	1.3.6.1.4.1.43.45.1.10.2.16.1.5		not-accessible	Protocol-based VLAN configuration table.
h3cProtocolVlanEntry	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1		not-accessible	Protocol-based VLAN configuration entry.
I32 h3cProtocolVlanVlanId	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1.1	Integer32	not-accessible	Vlan ID.
I32 h3cProtocolVlanProtocolIndex	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1.2	Integer32	not-accessible	The protocol index value of a row in this table in the range of [0..h3cProtocolNumPerVlan-1]. This object may not be provided during creation. In this case, a number is assigned by system automatically.
H3C h3cProtocolVlanProtocolType	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1.3	H3cvProtocolVlanProtocolType	read-create	Specify protocol types supported by a protocol-based VLAN. Now protocols supported on layer 3 are ip, ipx, at, ipv6, etc. Now protocols supported on layer 2 are llc, snap, ethernetii, etc. For details, see description of h3cProtocolVlanProtocolTypeValue.
H3C h3cProtocolVlanProtocolSubType	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1.4	H3cvProtocolVlanProtocolSubType	read-create	See description of h3cProtocolVlanProtocolTypeValue.
OCT h3cProtocolVlanProtocolTypeValue	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1.5	OCTET STRING	read-create	The value of the configured protocol type. By default, semicolon(;) is used as a seperator between different parts in the content of the object. The relationship among h3cProtocolVlanProtocolType, h3cProtocolVlanProtocolSubType and h3cProtocolVlanProtocolTypeValue is as follows. \|--------------------------------------------------------------------------------------------\| \| h3cProtocolVlan- \| h3cProtocolVlan- \| h3cProtocolVlanProtocolTypeValue \| \| ProtocolType \| ProtocolSubType \| \| \|------------------\|------------------\|------------------------------------------------------\| \| ip \| notused \| IP address with subnet mask in dotted decimal format.\| \| \| \| such as 10.10.11.12;255.255.0.0. By default,subnet \| \| \| \| mask is 255.255.255.0 . \| \|------------------\|------------------\|------------------------------------------------------\| \| ipv6 \| notused \| Zero length string \| \|------------------\|------------------\|------------------------------------------------------\| \| at \| notused \| Zero length string \| \|------------------\|------------------\|------------------------------------------------------\| \| ipx \| ethernetii \| Zero length string \| \| \| llc \| \| \| \| raw \| \| \| \| snap \| \| \|------------------\|------------------\|------------------------------------------------------\| \| mode-snap \| notused \| zero length string \| \| \|------------------\|------------------------------------------------------\| \| \| etype \| hex string like '600', which means 0x0600. \| \| \| \| The range is [0x600..0xffff] \| \|------------------\|------------------\|------------------------------------------------------\| \| mode-ethernetii \| notused \| zero length string \| \| \|------------------\|------------------------------------------------------\| \| \| etype \| hex string like '600', which means 0x0600. \| \| \| \| The range is [0x600..0xffff] \| \|------------------\|------------------\|------------------------------------------------------\| \| mode-llc \| notused \| the sequence of different parts is as follows. \| \| \| \| [dsap value][;ssap value][dsap value;ssap value] \| \| \| \| Both range is [0x00..0xff] \| \| \| \| \| \| \| \| For example. Suppose value of dsap and ssap are 0x09 \| \| \| \| and 0x0a. \| \| \| \| If neither dsap or ssap, the string length is zero. \| \| \| \| If dsap provided, the string is '09;' or '09' \| \| \| \| If ssap provided, the value is ';0a' \| \| \| \| If dsap and ssap provided, the value is '09;0a' \| \|------------------\|------------------\|------------------------------------------------------\|
ROW h3cProtocolVlanRowStatus	1.3.6.1.4.1.43.45.1.10.2.16.1.5.1.6	RowStatus	read-create	The row status of this table.
h3cProtocolVlanPortTable	1.3.6.1.4.1.43.45.1.10.2.16.1.6		not-accessible	Protocol-based VLAN port information table. h3cProtocolVlanPortVlanId refers to h3cProtocolVlanVlanId in h3cProtocolVlanTable. h3cProtocolVlanPortProtocolId refers to h3cProtocolVlanProtocolIndex in h3cProtocolVlanTable. So if the value of h3cProtocolVlanPortVlanId and h3cProtocolVlanPortProtocolId have no corresponding entry in h3cProtocolVlanTable, set operation for this table will fail. Only hybrid ports are supported by this table. Only untagged packets are supported by this table.
h3cProtocolVlanPortEntry	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1		not-accessible	Protocol-based VLAN port information entry.
I32 h3cProtocolVlanPortIndex	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.1	Integer32	not-accessible	The maximum number is the total number of the ports supported by device.
I32 h3cProtocolVlanPortVlanId	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.2	Integer32	not-accessible	The protocol-based VLAN ID.
I32 h3cProtocolVlanPortProtocolId	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.3	Integer32	not-accessible	The protocol index.
H3C h3cProtocolVlanPortProtocolType	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.4	H3cvProtocolVlanProtocolType	read-only	Refer to the description of h3cProtocolVlanProtocolType.
H3C h3cProtocolVlanPortProtocolSubType	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.5	H3cvProtocolVlanProtocolSubType	read-only	Refer to the description of h3cProtocolVlanProtocolSubType.
OCT h3cProtocolVlanPortTypeValue	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.6	OCTET STRING	read-only	Refer to the description of h3cProtocolVlanProtocolTypeValue.
ROW h3cProtocolVlanPortRowStatus	1.3.6.1.4.1.43.45.1.10.2.16.1.6.1.7	RowStatus	read-create	The row status of this table.
I32 h3cDifferentProtocolNumAllPort	1.3.6.1.4.1.43.45.1.10.2.16.1.7	Integer32	read-only	The maximum number of different protocols that can be applied to all ports.
h3cProtocolVlanConformance	1.3.6.1.4.1.43.45.1.10.2.16.2
h3cProtocolVlanCompliances	1.3.6.1.4.1.43.45.1.10.2.16.2.1
h3cProtocolVlanCompliance	1.3.6.1.4.1.43.45.1.10.2.16.2.1.1			The compliance statement for protocol vlan MIB.
h3cProtocolVlanGroups	1.3.6.1.4.1.43.45.1.10.2.16.2.2
h3cProtocolVlanOperateGroup	1.3.6.1.4.1.43.45.1.10.2.16.2.2.1			A group of scalar objects describing the maximum number.
h3cProtocolVlanProtocolGroup	1.3.6.1.4.1.43.45.1.10.2.16.2.2.2			A group of protocol vlan protocol.
h3cProtocolVlanPortGroup	1.3.6.1.4.1.43.45.1.10.2.16.2.2.3			A group of protocol vlan port.

RFC description

Manages protocol-based VLAN configurations for Layer 2 and Layer 3 protocols on Huawei/3Com network switches.

Start monitoring H3C/3Com LAN switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-PROTOCOL-VLAN-MIB

What Is A3COM-HUAWEI-PROTOCOL-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description