A3COM-HUAWEI-IF-EXT-MIB

All MIBs › A3COM-HUAWEI-IF-EXT-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2009-05-06

Category: Network Interfaces, Vendor: H3C/HH3C

Description: Extends standard IF-MIB interface objects with H3C-specific attributes such as flow control and port type.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-IF-EXT-MIB?

A3COM-HUAWEI-IF-EXT-MIB is an H3C enterprise MIB that extends the standard IETF IF-MIB with additional interface attributes such as flow statistics, port type, and speed history, applicable across routers, switches and other H3C products. It exposes per-interface traffic flow counters (bits and packets in/out over configurable intervals) and interface speed statistics tables, supplementing the basic counters found in the standard interface MIB. Its monitoring value is primarily performance and traffic-throughput visibility: administrators track flow-rate counters over defined intervals to detect traffic spikes, link saturation, or unusually low throughput indicating a failing link, complementing (not replacing) core hardware/link-status data from IF-MIB. It has an explicit, stated dependency on the standard IF-MIB, extending its object model rather than duplicating it. It is deployed broadly across H3C routers and switches wherever finer-grained interface traffic-rate monitoring than plain IF-MIB counters is needed. Network engineers evaluating or troubleshooting this functionality can download the A3COM-HUAWEI-IF-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-IF-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers and switches

Monitoring Examples

An admin would poll the h3cIfFlowStatTable, keyed by interface and h3cIfStatFlowInterval, reading h3cIfStatFlowInBits/h3cIfStatFlowOutBits and h3cIfStatFlowInPkts/h3cIfStatFlowOutPkts to compute real-time throughput per interface over the configured sampling window. The h3cIfSpeedStatTable provides historical speed statistics useful for spotting auto-negotiation flaps or unexpected link-speed downgrades. A sustained rise in h3cIfStatFlowInBytes on a WAN-facing interface, cross-checked against h3cIfStatGlobalFlowInterval, would flag a traffic surge worth investigating.

What Can Be Monitored

per-interface inbound/outbound bit rate
per-interface inbound/outbound packet rate
interface flow sampling interval
interface speed statistics history

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From HCNUM-TC

CounterBasedGauge64

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using h3cIfInNUcastPkts OID:

Select an H3C router or switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cIfInNUcastPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cIfExt	1.3.6.1.4.1.43.45.1.10.2.40			This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
h3cIfExtScalarGroup	1.3.6.1.4.1.43.45.1.10.2.40.1
I32 h3cIfStatGlobalFlowInterval	1.3.6.1.4.1.43.45.1.10.2.40.1.1	Integer32	read-write	Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.
h3cIfExtGroup	1.3.6.1.4.1.43.45.1.10.2.40.2
h3cIfStat	1.3.6.1.4.1.43.45.1.10.2.40.2.1
h3cIfStatScalarGroup	1.3.6.1.4.1.43.45.1.10.2.40.2.1.1
h3cIfStatTable	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2
h3cIfFlowStatTable	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1		not-accessible	This table contains objects to get statistic information of interfaces on a device.
h3cIfStatEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1		not-accessible	Entry items
I32 h3cIfStatFlowInterval	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.1	Integer32	read-write	Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
U32 h3cIfStatFlowInBits	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.2	Unsigned32	read-only	In bits in the specific interval.
U32 h3cIfStatFlowOutBits	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.3	Unsigned32	read-only	Out bits in specific interval.
U32 h3cIfStatFlowInPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.4	Unsigned32	read-only	In Packets in the specific interval.
U32 h3cIfStatFlowOutPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.5	Unsigned32	read-only	Out packets in the specific interval.
U32 h3cIfStatFlowInBytes	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.6	Unsigned32	read-only	In bytes in the specific interval.
U32 h3cIfStatFlowOutBytes	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.7	Unsigned32	read-only	Out bytes in the specific interval.
h3cIfSpeedStatTable	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2		not-accessible	This table contains objects to get average speed information in the specific interval of interfaces on a device.
h3cIfSpeedStatEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1		not-accessible	Entry items
I32 h3cIfSpeedStatInterval	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.1	Integer32	read-write	Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
U32 h3cIfSpeedStatInPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.2	Unsigned32	read-only	Average of input packets per second in the specific interval by h3cIfSpeedStatInterval.
U32 h3cIfSpeedStatOutPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.3	Unsigned32	read-only	Average of output packets per second in the specific interval by h3cIfSpeedStatInterval.
U32 h3cIfSpeedStatInBytes	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.4	Unsigned32	read-only	Average of input bytes per second in the specific interval by h3cIfSpeedStatInterval.
U32 h3cIfSpeedStatOutBytes	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.5	Unsigned32	read-only	Average of output bytes per second in the specific interval by h3cIfSpeedStatInterval.
h3cIfHCFlowStatTable	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3		not-accessible	This table contains objects to get statistic information of interfaces on a device.
h3cIfHCFlowStatEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1		not-accessible	Entry items
NUM h3cIfStatFlowHCInBits	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.1	CounterBasedGauge64	read-only	In bits in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBits.
NUM h3cIfStatFlowHCOutBits	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.2	CounterBasedGauge64	read-only	Out bits in specific interval. This object is a 64-bit version of h3cIfStatFlowOutBits.
NUM h3cIfStatFlowHCInPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.3	CounterBasedGauge64	read-only	In Packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowInPkts.
NUM h3cIfStatFlowHCOutPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.4	CounterBasedGauge64	read-only	Out packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutPkts.
NUM h3cIfStatFlowHCInBytes	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.5	CounterBasedGauge64	read-only	In bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBytes.
NUM h3cIfStatFlowHCOutBytes	1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.6	CounterBasedGauge64	read-only	Out bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutBytes.
h3cIfControl	1.3.6.1.4.1.43.45.1.10.2.40.2.2
h3cRTParentIfTable	1.3.6.1.4.1.43.45.1.10.2.40.2.2.1		not-accessible	This table contains all interfaces that can create sub interface.
h3cRTParentIfEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1		not-accessible	This entry describes a interface that can create sub interface.
I32 h3cRTParentIfIndex	1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.1	Integer32	not-accessible	The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface.
I32 h3cRTMinSubIfOrdinal	1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.2	Integer32	read-only	The minimum ordinal of the sub interface can be created.
I32 h3cRTMaxSubIfOrdinal	1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.3	Integer32	read-only	The max ordinal of the sub interface can be created.
h3cRTSubIfTable	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2		not-accessible	This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by h3cRTSubIfParentIfIndex and the h3cRTSubIfOrdinal must be in the range between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface from h3cRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP.
h3cRTSubIfEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1		not-accessible	The h3cRTSubIfTable entry items
I32 h3cRTSubIfParentIfIndex	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.1	Integer32	not-accessible	The parent interface index. The value should be the same as the h3cRTParentIfIndex.
I32 h3cRTSubIfOrdinal	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.2	Integer32	not-accessible	The ordinal of sub interface. It should between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface.
I32 h3cRTSubIfSubIfIndex	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.3	Integer32	read-only	The ifIndex value of the sub interface
STR h3cRTSubIfSubIfDesc	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.4	DisplayString	read-only	The name of the interface
ROW h3cRTSubIfRowStatus	1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.5	RowStatus	read-create	Operation status.
h3cIfLinkModeTable	1.3.6.1.4.1.43.45.1.10.2.40.2.2.3		not-accessible	This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode.
h3cIfLinkModeEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1		not-accessible	The interface link mode table entry
I32 h3cIfLinkModeIndex	1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.1	Integer32	not-accessible	The value is same as ifIndex.
INT h3cIfLinkMode	1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.2	INTEGER	read-write	The current link mode of the interface If h3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.
T/F h3cIfLinkModeSwitchSupport	1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.3	TruthValue	read-only	Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.
h3cIfInterfaces	1.3.6.1.4.1.43.45.1.10.2.40.2.3
I32 h3cIfPhysicalNumber	1.3.6.1.4.1.43.45.1.10.2.40.2.3.1	Integer32	read-only	Represents the number of physical interfaces in the device.
h3cIfTable	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2		not-accessible	A list of interface entries. The number of entries is given by the value of IfNumber.
h3cIfEntry	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1		not-accessible	An entry containing management information applicable to a particular interface.
I32 h3cIfUpDownTimes	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.1	Integer32	read-only	The interface's up/down times, since the device was initialized.
I32 h3cIfMtu	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.2	Integer32	read-write	The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface.
I32 h3cIfBandwidthRate	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.3	Integer32	read-only	The rate of the bandwidth for an interface.
I32 h3cIfDiscardPktRate	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.4	Integer32	read-only	The rate of the discarded packets for an interface.
TIK h3cIfStatusKeepTime	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.5	TimeTicks	read-only	The time since the interface entered its current operational state.
C64 h3cIfInNUcastPktsEx	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.6	Counter64	read-only	The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
C64 h3cIfOutNUcastPkts	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.7	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.
T/F h3cIfIsPoe	1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.8	TruthValue	read-only	Whether the interface supports poe.
h3cIfExtTrap	1.3.6.1.4.1.43.45.1.10.2.40.3
h3cIfExtTrapPrex	1.3.6.1.4.1.43.45.1.10.2.40.3.0
NTF h3cIfBandwidthUsageHigh	1.3.6.1.4.1.43.45.1.10.2.40.3.0.1			The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit.
NTF h3cIfDiscardPktRateHigh	1.3.6.1.4.1.43.45.1.10.2.40.3.0.2			The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit.
h3cIfExtTrapObject	1.3.6.1.4.1.43.45.1.10.2.40.3.1
h3cIfExtTrapCfgTable	1.3.6.1.4.1.43.45.1.10.2.40.3.1.1		not-accessible	The trap configuration table.
h3cIfExtTrapCfgEntry	1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1		not-accessible	An entry for this table.
I32 h3cIfBandwidthUpperLimit	1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1.1	Integer32	read-write	The rate of the bandwidth upper limit for an interface.
I32 h3cIfDiscardPktRateUpperLimit	1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1.2	Integer32	read-write	The rate of the discarded packets upper limit for an interface.

RFC description

Interface extension objects for H3C/Huawei/3Com routers and switches, including flow statistics and interface monitoring.

Start monitoring H3C routers and switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-IF-EXT-MIB