HH3C-FC-PSM-MIB

All MIBs › HH3C-FC-PSM-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2013-10-17

Category: Domain: Security, Domain: Storage, Fibre Channel and Storage, Vendor: H3C/HH3C

Description: Manages Fibre Channel Port Security Manager (PSM) policies and WWN binding on H3C SAN switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-FC-PSM-MIB?

HH3C-FC-PSM-MIB is an H3C proprietary module for the Fibre Channel Port Security Manager (PSM) feature on H3C SAN (storage area network) switches, managing port security policies and World Wide Name (WWN) binding to control which devices may log in to specific Fibre Channel ports. It exposes per-VSAN PSM enable state, per-port security policy configuration, and login-device binding entries mapping a device type and WWN to a specific login point on the fabric. Its monitoring value centers on Fibre Channel fabric security/software status -- letting an administrator confirm PSM is enabled per VSAN, check whether a port's security policy is active, and verify that only expected WWNs are bound to a given login point, catching unauthorized device attachment attempts. It is a vendor extension built on the Fibre Channel VSAN and WWN addressing model standardized by the T11 committee, and is deployed alongside H3C's broader FC/SAN management MIB family. It is typically deployed on H3C Fibre Channel SAN switches in enterprise or data center storage networks. Engineers can download the HH3C-FC-PSM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-FC-PSM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Fibre Channel SAN switch

Monitoring Examples

An administrator would check hh3cFcPsmEnableTable (hh3cFcPsmEnableEntry) for a given hh3cFcPsmEnableVsanIndex to confirm hh3cFcPsmEnable/hh3cFcPsmEnableState shows port security active on that VSAN, then review hh3cFcPsmConfigTable (hh3cFcPsmConfigEntry) entries keyed by hh3cFcPsmIndex to see the hh3cFcPsmLoginDevType and hh3cFcPsmLoginDev (WWN) bound to a hh3cFcPsmLoginPoint. A login attempt from a WWN not matching the configured hh3cFcPsmLoginDev for that login point would trigger a notification via hh3cFcPsmNotifications, flagging a potential unauthorized device trying to join the fabric.

What Can Be Monitored

PSM enable state per VSAN
port security policy configuration
WWN-to-login-point bindings
unauthorized login attempt notifications

Imported Objects

From HH3C-FC-TC-MIB

Hh3cFcNameIdOrZero

From HH3C-VSAN-MIB

hh3cSan

MODULE-IDENTITY

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifDescr	OBJECT-TYPE

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cFcPsmAllowedLogins OID:

Select an H3C Fibre Channel SAN switch (Port Security Manager) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cFcPsmAllowedLogins into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of requests that have been allowed on the specified VSAN. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cFcPsm	1.3.6.1.4.1.25506.2.127.8			This MIB contains the objects for FC port security.
hh3cFcPsmNotifications	1.3.6.1.4.1.25506.2.127.8.0
NTF hh3cFcPsmFPortDenyNotify	1.3.6.1.4.1.25506.2.127.8.0.1			Notifies that a FLOGI is denied on an F port of the local device.
NTF hh3cFcPsmEPortDenyNotify	1.3.6.1.4.1.25506.2.127.8.0.2			Notifies that a switch is denied on an E port of the local device.
hh3cFcPsmObjects	1.3.6.1.4.1.25506.2.127.8.1
hh3cFcPsmScalarObjects	1.3.6.1.4.1.25506.2.127.8.1.1
T/F hh3cFcPsmNotifyEnable	1.3.6.1.4.1.25506.2.127.8.1.1.1	TruthValue	read-write	Whether to generate the notification or not depends on the object.
hh3cFcPsmConfiguration	1.3.6.1.4.1.25506.2.127.8.1.2
hh3cFcPsmEnableTable	1.3.6.1.4.1.25506.2.127.8.1.2.1		not-accessible	Enable or disable the port security feature on a specified VSAN.
hh3cFcPsmEnableEntry	1.3.6.1.4.1.25506.2.127.8.1.2.1.1		not-accessible	Detailed information about the port security.
U32 hh3cFcPsmEnableVsanIndex	1.3.6.1.4.1.25506.2.127.8.1.2.1.1.1	Unsigned32	not-accessible	The ID of VSAN on this entry.
INT hh3cFcPsmEnable	1.3.6.1.4.1.25506.2.127.8.1.2.1.1.2	INTEGER	read-write	When set to enable, the port security is on, the value of hh3cFcPsmEnableState will be true. When set to enableWithAutoLearn, the port security is on with auto-learning, the value of hh3cFcPsmEnableState will be true. When set to disable, the port security is off, the value of hh3cFcPsmEnableState will be false. The noop means no action. The value of this object when read is always noop.
T/F hh3cFcPsmEnableState	1.3.6.1.4.1.25506.2.127.8.1.2.1.1.3	TruthValue	read-only	The state of the port security. When the value is true, it means the port security is on, while the false means the port security is off.
hh3cFcPsmConfigTable	1.3.6.1.4.1.25506.2.127.8.1.2.2		not-accessible	A table that contains the configured entries.
hh3cFcPsmConfigEntry	1.3.6.1.4.1.25506.2.127.8.1.2.2.1		not-accessible	Detailed information about each configuration.
U32 hh3cFcPsmIndex	1.3.6.1.4.1.25506.2.127.8.1.2.2.1.1	Unsigned32	not-accessible	The index of this entry.
HH3 hh3cFcPsmLoginDevType	1.3.6.1.4.1.25506.2.127.8.1.2.2.1.2	Hh3cFcPsmPortBindDevType	read-create	This represents the type of the instance of hh3cFcPsmLoginDev, which includes nWWN, pWWN, sWWN, and wildCard.
HH3 hh3cFcPsmLoginDev	1.3.6.1.4.1.25506.2.127.8.1.2.2.1.3	Hh3cFcNameIdOrZero	read-create	The logging-in device name, which is decided by the hh3cFcPsmLoginDevType object. It represents node WWN when the value of hh3cFcPsmLoginDevType is nWWN. It represents port WWN when the value of hh3cFcPsmLoginDevType is pWWN. It represents switch WWN when the value of hh3cFcPsmLoginDevType is sWWN. It represents any device when the value of hh3cFcPsmLoginDevType is wildCard, and the value of the instance of this object should be zero-length string. The value of this object should not be invalid when hh3cFcPsmRowStatus is set to createAndGo or active.
NUM hh3cFcPsmLoginPoint	1.3.6.1.4.1.25506.2.127.8.1.2.2.1.4	InterfaceIndexOrZero	read-create	The address of the port on the local switch through which the instance of hh3cFcPsmLoginDev can log in. It represents ifindex when the value is not zero. It represents any port when the value is zero.
ROW hh3cFcPsmRowStatus	1.3.6.1.4.1.25506.2.127.8.1.2.2.1.5	RowStatus	read-create	Entry status. When creating a new instance of this table, the following objects should be set simultaneously: hh3cFcPsmLoginDevType, h3cFcPsmLoginDev, hh3cFcPsmLoginPoint, hh3cFcPsmRowStatus. If hh3cFcPsmLoginDevType is set to wildCard, the value of the instance of hh3cFcPsmLoginDev should be zero-length string. The value of hh3cFcPsmLoginDevType and hh3cFcPsmLoginPoint cannot be set to wildCard and zero at the same time.
hh3cFcPsmEnfTable	1.3.6.1.4.1.25506.2.127.8.1.2.3		not-accessible	The FC port security enforced table. It contains not only the configured policies, but also the learning ones learnt by the switch itself.
hh3cFcPsmEnfEntry	1.3.6.1.4.1.25506.2.127.8.1.2.3.1		not-accessible	Detailed information about the FC port security enforced policy.
U32 hh3cFcPsmEnfIndex	1.3.6.1.4.1.25506.2.127.8.1.2.3.1.1	Unsigned32	not-accessible	The index of this entry.
HH3 hh3cFcPsmEnfLoginDevType	1.3.6.1.4.1.25506.2.127.8.1.2.3.1.2	Hh3cFcPsmPortBindDevType	read-only	This represents the type of the instance of hh3cFcPsmEnfLoginDev, which includes nWWN, pWWN, sWWN, and wildCard.
HH3 hh3cFcPsmEnfLoginDev	1.3.6.1.4.1.25506.2.127.8.1.2.3.1.3	Hh3cFcNameIdOrZero	read-only	The logging-in device name, which is decided by the hh3cFcPsmEnfLoginDevType object. It represents node WWN when the value of hh3cFcPsmEnfLoginDevType is nWWN. It represents port WWN when the value of hh3cFcPsmEnfLoginDevType is pWWN. It represents switch WWN when the value of hh3cFcPsmEnfLoginDevType is sWWN. It represents any device when the value of hh3cFcPsmEnfLoginDevType is wildCard, and the value of the instance of this object should be zero-length string.
NUM hh3cFcPsmEnfLoginPoint	1.3.6.1.4.1.25506.2.127.8.1.2.3.1.4	InterfaceIndexOrZero	read-only	The address of the port on the local switch through which the instance of hh3cFcPsmEnfLoginDev can log in. It represents ifindex when the value is not zero. It represents any port when the value is zero.
INT hh3cFcPsmEnfEntryType	1.3.6.1.4.1.25506.2.127.8.1.2.3.1.5	INTEGER	read-only	When the value is learning, it represents the entry is learnt by the switch itself temporarily and will be deleted when the device log out. When the value is learnt, it represents the entry is learnt by the switch permanently. When the value is static, it represents the entry is configured.
hh3cFcPsmCopyToConfigTable	1.3.6.1.4.1.25506.2.127.8.1.2.4		not-accessible	Specifies whether to copy the entries from enforced table to the ones on configured table.
hh3cFcPsmCopyToConfigEntry	1.3.6.1.4.1.25506.2.127.8.1.2.4.1		not-accessible	Detailed information about the operation.
INT hh3cFcPsmCopyToConfig	1.3.6.1.4.1.25506.2.127.8.1.2.4.1.1	INTEGER	read-write	When the object is set to copy, the learned entries will be copied on to the configured table on this VSAN, while the noop means no operation. The value of this object when read is always noop.
hh3cFcPsmAutoLearnTable	1.3.6.1.4.1.25506.2.127.8.1.2.5		not-accessible	This table shows whether the auto-learning is enabled or not on specific VSANs.
hh3cFcPsmAutoLearnEntry	1.3.6.1.4.1.25506.2.127.8.1.2.5.1		not-accessible	Detailed information about the auto-learning.
T/F hh3cFcPsmAutoLearnEnable	1.3.6.1.4.1.25506.2.127.8.1.2.5.1.1	TruthValue	read-write	This object is set to true to enable, or false to disable auto-learning on the local switch. When set to true, the switch can learn the devices that have already logged in as learning entries on the enforced table, while the false can stop the learning operation with the learning entries transformed to learnt ones.
hh3cFcPsmClearTable	1.3.6.1.4.1.25506.2.127.8.1.2.6		not-accessible	This table is used for cleaning specific entries in enforced table.
hh3cFcPsmClearEntry	1.3.6.1.4.1.25506.2.127.8.1.2.6.1		not-accessible	Detailed information about the cleaning options.
HH3 hh3cFcPsmClearType	1.3.6.1.4.1.25506.2.127.8.1.2.6.1.1	Hh3cFcPsmClearEntryType	read-write	This object when set to clearStatic, results in port bind static entries being cleared on this VSAN. This object when set to clearAutoLearn, results in auto-learnt entries being cleared on this VSAN. This object when set to clearAll, results in all of the port bind entries being cleared on this VSAN. No action is taken if this object is set to noop. The value of this object when read is always noop.
NUM hh3cFcPsmClearIntf	1.3.6.1.4.1.25506.2.127.8.1.2.6.1.2	InterfaceIndexOrZero	read-write	The object specifies the interface on which the entries will be cleared. If the object is zero or not set, it means the specified entries on all interfaces will be cleared.
hh3cFcPsmStats	1.3.6.1.4.1.25506.2.127.8.1.3
hh3cFcPsmStatsTable	1.3.6.1.4.1.25506.2.127.8.1.3.1		not-accessible	This table contains statistics of devices, which had been allowed or denied to log into the switch.
hh3cFcPsmStatsEntry	1.3.6.1.4.1.25506.2.127.8.1.3.1.1		not-accessible	Detailed information about the statistics.
C32 hh3cFcPsmAllowedLoginsEx	1.3.6.1.4.1.25506.2.127.8.1.3.1.1.1	Counter32	read-only	The number of requests that have been allowed on the specified VSAN.
C32 hh3cFcPsmDeniedLogins	1.3.6.1.4.1.25506.2.127.8.1.3.1.1.2	Counter32	read-only	The number of requests that have been denied on the specified VSAN.
INT hh3cFcPsmStatsClear	1.3.6.1.4.1.25506.2.127.8.1.3.1.1.3	INTEGER	read-write	The statistics on this VSAN will be cleared if this object is set to clear. No action is taken if this object is set to noop. The value of this object when read is always noop.
hh3cFcPsmViolationTable	1.3.6.1.4.1.25506.2.127.8.1.3.2		not-accessible	This table maintains the information about the violations happened, containing at most 1024 items. When the number exceeds 1024, the earliest item will be over-written.
hh3cFcPsmViolationEntry	1.3.6.1.4.1.25506.2.127.8.1.3.2.1		not-accessible	Detailed information about the violation.
U32 hh3cFcPsmViolationIndex	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.1	Unsigned32	not-accessible	The index of this entry. The entry is uniquely distinguished by WWN, WWN type and ifindex where the login was denied.
HH3 hh3cFcPsmLoginPWWN	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.2	Hh3cFcNameIdOrZero	read-only	The pWWN of the device whose FLOGI(Fabric Login) request had been denied. If the device is an n-node, the value of the instance of hh3cFcPsmLoginSWWN should be zero-length string.
HH3 hh3cFcPsmLoginNWWN	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.3	Hh3cFcNameIdOrZero	read-only	The nWWN of the device whose FLOGI request had been denied. If the device is an n-node, the value of the instance of hh3cFcPsmLoginSWWN should be zero-length string.
HH3 hh3cFcPsmLoginSWWN	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.4	Hh3cFcNameIdOrZero	read-only	The sWWN of the device whose FLOGI request had been denied. If the device is a switch, the values of the instance of hh3cFcPsmLoginPWWN and hh3cFcPsmLoginNWWN should be zero-length string.
NUM hh3cFcPsmLoginIntf	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.5	InterfaceIndex	read-only	The ifindex of the port where the login was denied.
TIM hh3cFcPsmLoginTime	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.6	TimeStamp	read-only	Specifies the value of SysUpTime when the last denied login happened.
C32 hh3cFcPsmLoginCount	1.3.6.1.4.1.25506.2.127.8.1.3.2.1.7	Counter32	read-only	The number of times for a certain nWWN/pWWN or sWWN had been denied to log into an interface of the local device.

RFC description

H3C vendor-private MIB for managing Fibre Channel power supply modules on enterprise storage switches.

Start monitoring H3C Fibre Channel SAN switch (Port Security Manager) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-FC-PSM-MIB