ZXR10-RACK-MIB :: zxr10SlotEPLD2Ver

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-RACK-MIB › zxr10SlotEPLD2Ver

zxr10SlotEPLD2Ver

Module: ZXR10-RACK-MIB

OID (symbolic): ZXR10-RACK-MIB::zxr10SlotEPLD2Ver

OID (numeric): 1.3.6.1.4.1.3902.3.6002.1.3.1.24

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: It describes the EPLD2 version of the special card.

What is zxr10SlotEPLD2Ver?

Reports the version of the second EPLD firmware image on the card. Cards with multiple programmable logic devices report each one separately so an admin can confirm every EPLD is on the expected version.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6002.1.3.1.24
snmpwalk -v2c -c public <target> ZXR10-RACK-MIB::zxr10SlotEPLD2Ver

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6002.1.3.1.24.1
snmpget -v2c -c public <target> ZXR10-RACK-MIB::zxr10SlotEPLD2Ver.1

Start monitoring ZTE ZXR10 T8000 chassis switch/router (shelf/slot/card-presence inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-RACK-MIB::zxr10SlotEPLD2Ver OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 T8000 chassis switch/router (shelf/slot/card-presence inventory status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.6002zxUPNZXR10-PROJECT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.6002.1zxr10RackMIBZXR10-RACK-MIB
1.3.6.1.4.1.3902.3.6002.1.3zxr10SlotBoardTableZXR10-RACK-MIB
1.3.6.1.4.1.3902.3.6002.1.3.1zxr10SlotBoardEntryZXR10-RACK-MIB
1.3.6.1.4.1.3902.3.6002.1.3.1.24zxr10SlotEPLD2VerZXR10-RACK-MIB

Module

This MIB depends on