ZTE-AN-PPPOE-TEST-MIB :: zxAnPppoeTestIfUserVid

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-PPPOE-TEST-MIB › zxAnPppoeTestIfUserVid

zxAnPppoeTestIfUserVid

Module: ZTE-AN-PPPOE-TEST-MIB

OID (symbolic): ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfUserVid

OID (numeric): 1.3.6.1.4.1.3902.1082.70.56.2.2.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-create

Description: The user VLAN of the interface which will be used in the testing datagram.

0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN list of interface. If the VLAN cannot be found in the tagged VLAN list of interface, test should fail.

What is zxAnPppoeTestIfUserVid?

This read-create object sets the user VLAN ID (0-4094) to be used in the PPPoE test datagram sent on this interface; a value of 0 means the interface's PVID is used, and any nonzero value must already be in the interface's tagged VLAN list or the test fails. Admins set this when they need the PPPoE test traffic to run over a specific tagged VLAN rather than the port's default VLAN. Setting it to 100 runs the PPPoE connectivity test tagged with VLAN 100, provided that VLAN is already permitted on the interface.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.70zxAnServiceSecurityZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.70.56zxAnPppoeTestMibZTE-AN-PPPOE-TEST-MIB
1.3.6.1.4.1.3902.1082.70.56.2zxAnPppoeTestObjectsZTE-AN-PPPOE-TEST-MIB
1.3.6.1.4.1.3902.1082.70.56.2.2zxAnPppoeTestIfConfTableZTE-AN-PPPOE-TEST-MIB
1.3.6.1.4.1.3902.1082.70.56.2.2.1zxAnPppoeTestIfConfEntryZTE-AN-PPPOE-TEST-MIB
1.3.6.1.4.1.3902.1082.70.56.2.2.1.1zxAnPppoeTestIfUserVidZTE-AN-PPPOE-TEST-MIB

Module

This MIB depends on