All MIBs › ZTE-AN-PPPOE-TEST-MIB › zxAnPppoeTestIfStatus
zxAnPppoeTestIfStatus
Module: ZTE-AN-PPPOE-TEST-MIB
OID (symbolic): ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfStatus
OID (numeric): 1.3.6.1.4.1.3902.1082.70.56.2.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: PPPoE test status. Agent need keep this parameter updated so that manager can get the latest status of test by polling.
Possible values are: notStarted(1) - PPPoE test is not started. inProgress(2) - PPPoE test is in progress. success(3) - PPPoE test is completed successfully. failed(4) - PPPoE test failed.
What is zxAnPppoeTestIfStatus?
This read-only object reports the current state of the PPPoE test on this interface: notStarted(1), inProgress(2), success(3), or failed(4), kept updated by the agent so a manager can poll for the latest result. Admins poll this after triggering a test to determine whether the PPPoE session establishment succeeded. Seeing failed(4) here would prompt the admin to check zxAnPppoeTestIfFailReason for the specific cause.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.56.2.3.1.1 snmpwalk -v2c -c public <target> ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.56.2.3.1.1.1 snmpget -v2c -c public <target> ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfStatus.1
Start monitoring ZTE access node (DSLAM/OLT broadband access platform) (PPPoE session-establishment diagnostic test-result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfStatus OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT broadband access platform) (PPPoE session-establishment diagnostic test-result status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.56 | zxAnPppoeTestMib | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2 | zxAnPppoeTestObjects | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2.3 | zxAnPppoeTestIfStatusTable | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2.3.1 | zxAnPppoeTestIfStatusEntry | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2.3.1.1 | zxAnPppoeTestIfStatus | ZTE-AN-PPPOE-TEST-MIB |