All MIBs › ZTE-AN-PPPOE-TEST-MIB › zxAnPppoeTestIfFailReason
zxAnPppoeTestIfFailReason
Module: ZTE-AN-PPPOE-TEST-MIB
OID (symbolic): ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfFailReason
OID (numeric): 1.3.6.1.4.1.3902.1082.70.56.2.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Failed reason for PPPoE test.
Possible values are: none(1) - No Error unknownError(2) - Unknown Error hardwareNotSupport(3) - Hardware Not Supported vlanNotFound(4) - VLAN Not Found padiTimeout(5) - PADI Request Timeout padrTimeout(6) - PADR Request Timeout lcpNegotiationFail(7) - LCP Negotiation Failed userAuthFail(8) - Incorrect User Name or Password ipNegotiationFail(9) - IP Negotiation Failed pppoeTestTimeout(10) - PPPoE Test Timeout
What is zxAnPppoeTestIfFailReason?
This read-only object reports the specific reason a PPPoE test failed, from an enumeration including vlanNotFound(4), padiTimeout(5), padrTimeout(6), lcpNegotiationFail(7), userAuthFail(8), ipNegotiationFail(9), and pppoeTestTimeout(10). Admins read this immediately after a failed test to pinpoint exactly which stage of PPPoE/PPP negotiation broke down rather than just knowing the test failed. A value of userAuthFail(8) tells the admin the configured test username or password was rejected by the BAS, rather than a network-layer problem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.56.2.3.1.2 snmpwalk -v2c -c public <target> ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.56.2.3.1.2.1 snmpget -v2c -c public <target> ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfFailReason.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> zxAnPppoeTestIfFailReason.1
Start monitoring ZTE access node (DSLAM/OLT broadband access platform) (PPPoE session-establishment diagnostic test-result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfFailReason OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT broadband access platform) (PPPoE session-establishment diagnostic test-result status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.56 | zxAnPppoeTestMib | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2 | zxAnPppoeTestObjects | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2.3 | zxAnPppoeTestIfStatusTable | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2.3.1 | zxAnPppoeTestIfStatusEntry | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.2.3.1.2 | zxAnPppoeTestIfFailReason | ZTE-AN-PPPOE-TEST-MIB |