All MIBs › ZTE-AN-PPPOE-TEST-MIB › zxAnPppoeTestCapabilities
zxAnPppoeTestCapabilities
Module: ZTE-AN-PPPOE-TEST-MIB
OID (symbolic): ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestCapabilities
OID (numeric): 1.3.6.1.4.1.3902.1082.70.56.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The PPPoE test compatibility. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means not supporting zxAnPppoeTestIfUserVid in zxAnPppoeTestIfConfTable. bit 1: value 1 means supporting zxAnPppoeTestIfUserMacAddress in zxAnPppoeTestIfConfTable. NOTE: No recommended to display it in NMS.
What is zxAnPppoeTestCapabilities?
This read-only BITS object reports which optional PPPoE test features this equipment supports: bit 0 set means zxAnPppoeTestIfUserVid in the config table is NOT supported, and bit 1 set means zxAnPppoeTestIfUserMacAddress IS supported; the MIB explicitly notes it is not recommended to display this in the NMS. Management software reads this before attempting to configure per-interface test parameters, to know which fields the device actually honors. A device reporting bit 1 set can accept a specific test MAC address via zxAnPppoeTestIfUserMacAddress, while one without that bit set will ignore or reject that field.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.56.1.1 snmpwalk -v2c -c public <target> ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.56.1.1.1 snmpget -v2c -c public <target> ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestCapabilities.1
Start monitoring ZTE access node (DSLAM/OLT broadband access platform) (PPPoE session-establishment diagnostic test-result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestCapabilities OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT broadband access platform) (PPPoE session-establishment diagnostic test-result status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.56 | zxAnPppoeTestMib | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.1 | zxAnPppoeTestGlobalObjects | ZTE-AN-PPPOE-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.56.1.1 | zxAnPppoeTestCapabilities | ZTE-AN-PPPOE-TEST-MIB |