All MIBs › ZTE-AN-PORT-IDENTIFICATION-MIB › zxAnPortIdAccessNodeIdType
zxAnPortIdAccessNodeIdType
Module: ZTE-AN-PORT-IDENTIFICATION-MIB
OID (symbolic): ZTE-AN-PORT-IDENTIFICATION-MIB::zxAnPortIdAccessNodeIdType
OID (numeric): 1.3.6.1.4.1.3902.1082.70.50.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Access Node Identifier type. There are three types: - inbandMac: the inband mac of access node - accessNodeName: the name of access node. - sysName: the system name.
If set to inbandMac, the inband mac will be used as the Access-Node-ID or Access-Node-ID1 in the circuit ID; If set to accessNodeName, the name of access node will be used; If set to sysName, the system name will be used. C6XX only support inbandMac(1), accessNodeName(2).
What is zxAnPortIdAccessNodeIdType?
This read-write object selects which identifier is used as the Access-Node-ID in the DHCP/PPPoE circuit ID: inbandMac(1) (default), accessNodeName(2), or sysName(3); note that C6XX platforms only support inbandMac(1) and accessNodeName(2). An admin sets this to control which identifying value (the device's inband MAC address, its configured access node name, or its system name) upstream systems will see embedded in the circuit ID for subscriber traffic. Setting it to accessNodeName(2) would make the access node use its configured zxAnPortIdAccessNodeName value as the Access-Node-ID in circuit IDs rather than its MAC address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.50.1.2 snmpwalk -v2c -c public <target> ZTE-AN-PORT-IDENTIFICATION-MIB::zxAnPortIdAccessNodeIdType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.50.1.2.1 snmpget -v2c -c public <target> ZTE-AN-PORT-IDENTIFICATION-MIB::zxAnPortIdAccessNodeIdType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.50.1.2.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT broadband access equipment) (per-port circuit-ID/remote-ID identification config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-PORT-IDENTIFICATION-MIB::zxAnPortIdAccessNodeIdType OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT broadband access equipment) (per-port circuit-ID/remote-ID identification config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.50 | zxAnPortIdentificationMib | ZTE-AN-PORT-IDENTIFICATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.50.1 | zxAnPortIdGlobalObjects | ZTE-AN-PORT-IDENTIFICATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.50.1.2 | zxAnPortIdAccessNodeIdType | ZTE-AN-PORT-IDENTIFICATION-MIB |