ZTE-AN-PORT-IDENTIFICATION-MIB DEFINITIONS ::= BEGIN 
IMPORTS 
    OBJECT-TYPE, MODULE-IDENTITY, Integer32        FROM SNMPv2-SMI
    OBJECT-GROUP, NOTIFICATION-GROUP,MODULE-COMPLIANCE
                                                   FROM SNMPv2-CONF
    DisplayString, RowStatus, TruthValue           FROM SNMPv2-TC
    ifIndex                                        FROM IF-MIB
    zxAnServiceSecurity                            FROM ZTE-AN-SMI
    zxAnSubIfIndex                                 FROM ZTE-AN-IF-MIB
    ZxAnAccessLoopTagType                          
                            FROM ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB;
                            
    zxAnPortIdentificationMib   MODULE-IDENTITY
        LAST-UPDATED    "201306250000Z"
        ORGANIZATION    "ZTE Corporation"
        CONTACT-INFO    "E-mail: li.dandan20@zte.com.cn"
        DESCRIPTION     "This MIB defines managed objects of port identification 
                         for Access Node."
        REVISION        "201306250000Z"
        DESCRIPTION     "The modification of this mib file is following:
                        - New objects for zxAnPortIdIfConfTable:
                         zxAnPortIdIfConfFormatProfile         
                         zxAnPortIdIfConfRidFormatProfile
                        - Delete zxAnPortIdCidSyntaxTable."        
        REVISION        "201208011030Z"
        DESCRIPTION
            "Initial version of this MIB module."
        ::= { zxAnServiceSecurity 50 }

    zxAnPortIdGlobalObjects        OBJECT IDENTIFIER ::= {zxAnPortIdentificationMib 1}
    zxAnPortIdObjects              OBJECT IDENTIFIER ::= {zxAnPortIdentificationMib 2}

--------------------------------------------------------------------------------
-- 1. Global Objects
--------------------------------------------------------------------------------

    zxAnPortIdAccessNodeName OBJECT-TYPE
        SYNTAX      DisplayString  ( SIZE ( 1 .. 50  ) )
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of access node."
        DEFVAL { "ZXAN" }
        ::= { zxAnPortIdGlobalObjects 1 }

    zxAnPortIdAccessNodeIdType OBJECT-TYPE
        SYNTAX      INTEGER {   
                inbandMac(1),
                accessNodeName(2),
                sysName(3)
            }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Access Node Identifier type. There are three types:
                    - inbandMac: the inband mac of access node
                    - accessNodeName: the name of access node.
                    - sysName: the system name. 

             If set to inbandMac, the inband mac will be used 
             as the Access-Node-ID or Access-Node-ID1 in the 
             circuit ID; 
             If set to accessNodeName, the name of access node 
             will be used;
             If set to sysName, the system name will be used.
             C6XX only support inbandMac(1), accessNodeName(2).
            "
        DEFVAL { inbandMac }
        ::= { zxAnPortIdGlobalObjects 2 }
        
    zxAnPortIdRack OBJECT-TYPE
        SYNTAX      Integer32 (0..63)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Rack Number of access node, which will be used in circuit ID."
        DEFVAL { 0 }
        ::= { zxAnPortIdGlobalObjects 4 }


    zxAnPortIdShelf OBJECT-TYPE
        SYNTAX      Integer32 (0..31)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Shelf Number of access node, which will be used in circuit ID."
        DEFVAL { 0 }
        ::= { zxAnPortIdGlobalObjects 5 }
    

-------------------------------------------------------------------------------
-- Following objects are defined.
-- 1.PortId Interface Table
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- 1. PortId Interface Table
-------------------------------------------------------------------------------
    
    zxAnPortIdIfConfTable OBJECT-TYPE 
        SYNTAX      SEQUENCE OF ZxAnPortIdIfConfEntry 
        MAX-ACCESS  not-accessible 
        STATUS      current 
        DESCRIPTION 
            "The table of port identification data at interface level." 
        ::= { zxAnPortIdObjects 1 }
    
    zxAnPortIdIfConfEntry OBJECT-TYPE 
        SYNTAX      ZxAnPortIdIfConfEntry
        MAX-ACCESS  not-accessible 
        STATUS      current 
        DESCRIPTION 
            "The entry of the table."
        INDEX { ifIndex, zxAnSubIfIndex } 
        ::= { zxAnPortIdIfConfTable 1 }
    
    ZxAnPortIdIfConfEntry ::= SEQUENCE {
        zxAnPortIdIfConfRid                   DisplayString,
        zxAnPortIdIfConfUserDefinedCid        DisplayString
        }
    
    zxAnPortIdIfConfRid OBJECT-TYPE 
        SYNTAX      DisplayString (SIZE (0..64))
        MAX-ACCESS  read-write 
        STATUS      current 
        DESCRIPTION 
            "The remote ID, which is a string with maximum length 64."
        DEFVAL { "" }
        ::= { zxAnPortIdIfConfEntry 3 }
       
   zxAnPortIdIfConfUserDefinedCid OBJECT-TYPE 
        SYNTAX      DisplayString (SIZE (0..64))
        MAX-ACCESS  read-write 
        STATUS      current 
        DESCRIPTION 
            "The user-defined circuit ID, which is a string with maximum length 64.
             It will be used as the circuit ID of an interface, if the format of the
             interface is set to franceTel(9)."
        DEFVAL { "" }
        ::= { zxAnPortIdIfConfEntry 5 }
        
--------------------------------------------------------------------------------
-- 31. zxAnPortIdConformance
--------------------------------------------------------------------------------

zxAnPortIdConformance      OBJECT IDENTIFIER ::= {zxAnPortIdentificationMib 4}

zxAnPortIdCompliances      OBJECT IDENTIFIER ::= {zxAnPortIdConformance 1}
zxAnPortIdGroups           OBJECT IDENTIFIER ::= {zxAnPortIdConformance 2}

    zxAnPortIdCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            "The compliance statement for entities which implement the
             ZTE-AN-PORT-IDENTIFICATION-MIB."
        MODULE
        
-- Note: MANDATORY-GROUPS

            MANDATORY-GROUPS {
                zxAnPortIdGlobalGroup,
                zxAnPortIdGroup
            }
        ::= { zxAnPortIdCompliances 1 }

-- Note: the global variables and table variables in group have to be 
--implemented by access node.
                         
    zxAnPortIdGlobalGroup OBJECT-GROUP
        OBJECTS {
            zxAnPortIdAccessNodeName, 
            zxAnPortIdAccessNodeIdType
        }
        STATUS current
        DESCRIPTION
            "A collection of global objects providing port-identification 
            functions."
        ::= { zxAnPortIdGroups 1 } 
            
    zxAnPortIdGroup OBJECT-GROUP
        OBJECTS {
            zxAnPortIdIfConfRid
        }
        STATUS current
        DESCRIPTION
            "A collection of interface objects providing port-identification 
            functions."
        ::= { zxAnPortIdGroups 2 }    

-- Note: the following trap groups have to be implemented by access node.
        
END