All MIBs › ZTE-AN-PON-REMOTE-ONU-MIB › zxAnPonRmCallerTestSipFailReason
zxAnPonRmCallerTestSipFailReason
Module: ZTE-AN-PON-REMOTE-ONU-MIB
OID (symbolic): ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestSipFailReason
OID (numeric): 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The failed reason of SIP test. This field should be filled when the value of zxAnPonRmCallerTestFailReason is 'sipTestFailed'.
dialToneTestFailure(1) - Dial tone test failure. inviteOkButNoBearerData(2) - No bearer traffic was received even though the test call was successful. callTimeoutNo200Ok(3) - The test call never completed although provisional response were received for the INVITE request. noResponseToInvite(4) - No response was received to the INVITE request and attempts to retry the INVITE timed out without a response. errorCodeAndReasonPhrase(5) - The softswitch returned an error to the INVITE request. callCancelledByServer(6) - The softswitch sent a CANCEL for the INVITE transaction. callCancelledByOnt(7) - The call was cancelled by the ONT. lineNotConfigured(8) - The POTS line is not fully configured, probably due to missing SIP provisioning data. lineNotInValidState(9)- The POTS line is in the wrong status to perform the test. lineNotRegistered(10) - The POTS line is not registered with the softswitch. notchFiltersRequired(11) - The notch filter settings in the configuration profile analog data were missing.
What is zxAnPonRmCallerTestSipFailReason?
Reports why the SIP signaling for the caller-side voice test failed, such as a dial-tone test failure, no bearer data despite an apparently successful call, a call timeout with no 200 OK, no response to the INVITE, an explicit SIP error code, a server- or ONT-initiated cancel, or a misconfigured/unregistered line. It's only populated when zxAnPonRmCallerTestFailReason indicates a SIP-level test failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.5 snmpwalk -v2c -c public <target> ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestSipFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.5.1 snmpget -v2c -c public <target> ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestSipFailReason.1
Start monitoring ZTE ZXA10 GPON/EPON OLTs and ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestSipFailReason OID value, configure state conditions and alerts, and monitor any ZTE ZXA10 GPON/EPON OLTs and ONUs from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.500 | zxAnPon | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.3 | zxAnPonRemoteOnuMib | ZTE-AN-PON-REMOTE-ONU-MIB |
| 1.3.6.1.4.1.3902.1082.500.3.2 | zxAnPonRmOnuObjects | ZTE-AN-PON-REMOTE-ONU-MIB |
| 1.3.6.1.4.1.3902.1082.500.3.2.9 | zxAnPonRmOnuOamObjects | ZTE-AN-PON-REMOTE-ONU-MIB |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6 | zxAnPonRmOnuVoipCallerTestTable | ZTE-AN-PON-REMOTE-ONU-MIB |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1 | zxAnPonRmOnuVoipCallerTestEntry | ZTE-AN-PON-REMOTE-ONU-MIB |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.5 | zxAnPonRmCallerTestSipFailReason | ZTE-AN-PON-REMOTE-ONU-MIB |