ZTE-AN-PON-REMOTE-ONU-MIB :: zxAnPonRmCallerTestDelay

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-PON-REMOTE-ONU-MIB › zxAnPonRmCallerTestDelay

zxAnPonRmCallerTestDelay

Module: ZTE-AN-PON-REMOTE-ONU-MIB

OID (symbolic): ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestDelay

OID (numeric): 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Specifies how long it takes to set up bearer traffic RTP packets for the POTS line being tested in tenths of a second.The delay measure timer starts when the INVITE is generated for a call origination to the phone number specified by the PHONENO parameter in the DGN-SIPDIALTONE TL1 command. The SIP application at the ONU starts listening for RTP packets. If RTP packets are detected, the delay measure timer is stopped and the timer value is recorded for later reporting. Range for measure post dial delay is 0.0 to 6553.5 in tenths of seconds.

What is zxAnPonRmCallerTestDelay?

Reports, in tenths of a second, how long it took to establish the bearer (RTP) voice path for the test call, measured from when the INVITE is generated until RTP packets are first detected. This is effectively a post-dial delay measurement, capturing how quickly the call setup actually produces working voice.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.4
snmpwalk -v2c -c public <target> ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.4.1
snmpget -v2c -c public <target> ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestDelay.1

Start monitoring ZTE ZXA10 GPON/EPON OLTs and ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonRmCallerTestDelay OID value, configure state conditions and alerts, and monitor any ZTE ZXA10 GPON/EPON OLTs and ONUs from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.500zxAnPonZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.500.3zxAnPonRemoteOnuMibZTE-AN-PON-REMOTE-ONU-MIB
1.3.6.1.4.1.3902.1082.500.3.2zxAnPonRmOnuObjectsZTE-AN-PON-REMOTE-ONU-MIB
1.3.6.1.4.1.3902.1082.500.3.2.9zxAnPonRmOnuOamObjectsZTE-AN-PON-REMOTE-ONU-MIB
1.3.6.1.4.1.3902.1082.500.3.2.9.6zxAnPonRmOnuVoipCallerTestTableZTE-AN-PON-REMOTE-ONU-MIB
1.3.6.1.4.1.3902.1082.500.3.2.9.6.1zxAnPonRmOnuVoipCallerTestEntryZTE-AN-PON-REMOTE-ONU-MIB
1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.4zxAnPonRmCallerTestDelayZTE-AN-PON-REMOTE-ONU-MIB