ZTE-AN-MULTICAST-BASE-MIB :: zxAnMcastDataProtectionEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-MULTICAST-BASE-MIB › zxAnMcastDataProtectionEnable

zxAnMcastDataProtectionEnable

Module: ZTE-AN-MULTICAST-BASE-MIB

OID (symbolic): ZTE-AN-MULTICAST-BASE-MIB::zxAnMcastDataProtectionEnable

OID (numeric): 1.3.6.1.4.1.3902.1082.60.16.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable/disable multicast data protection.

What is zxAnMcastDataProtectionEnable?

This read-write enumerated object turns multicast data protection on or off device-wide, defaulting to enabled, per its DEFVAL. Admins use this to guard against multicast stream disruption or misdelivery, keeping it enabled by default unless troubleshooting requires disabling the protection mechanism temporarily. For example, an admin diagnosing an odd multicast forwarding issue might briefly set this to disabled(2) to see if the protection logic itself is contributing to the symptom, then restore it to enabled(1).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.60.16.2.1.1
snmpwalk -v2c -c public <target> ZTE-AN-MULTICAST-BASE-MIB::zxAnMcastDataProtectionEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.60.16.2.1.1.1
snmpget -v2c -c public <target> ZTE-AN-MULTICAST-BASE-MIB::zxAnMcastDataProtectionEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.60.16.2.1.1.1 i <value>

Start monitoring ZTE Access Node (shared IGMP/MLD-snooping base-configuration support, no independent runtime data) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-MULTICAST-BASE-MIB::zxAnMcastDataProtectionEnable OID value, configure state conditions and alerts, and monitor any ZTE Access Node (shared IGMP/MLD-snooping base-configuration support, no independent runtime data) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.60zxAnMulticastZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.60.16zxAnMulticastBaseMibZTE-AN-MULTICAST-BASE-MIB
1.3.6.1.4.1.3902.1082.60.16.2zxAnMulticastBaseObjectsZTE-AN-MULTICAST-BASE-MIB
1.3.6.1.4.1.3902.1082.60.16.2.1zxAnMulticastBaseGlobalObjectsZTE-AN-MULTICAST-BASE-MIB
1.3.6.1.4.1.3902.1082.60.16.2.1.1zxAnMcastDataProtectionEnableZTE-AN-MULTICAST-BASE-MIB