ZTE-AN-IEEE1588-MIB :: zxAnSyncTime1ppsSrcCurrentQL

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-IEEE1588-MIB › zxAnSyncTime1ppsSrcCurrentQL

zxAnSyncTime1ppsSrcCurrentQL

Module: ZTE-AN-IEEE1588-MIB

OID (symbolic): ZTE-AN-IEEE1588-MIB::zxAnSyncTime1ppsSrcCurrentQL

OID (numeric): 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The '1PPS+ToD' singnal source current quality level. locked(1): 1PPS input signal source is locked with grandmaster at this time. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. qlssua(4): quality level of type I/V slave clock, it is defined in recommendation G.812. qlssub(8): quality level of type VI slave clock, it is defined in recommendation G.812. qlsec(11): quality level of SDH equipment clock, it is defined in recommendation G.813. qldnu(15): quality level of unusable clock, it is defined in recommendation G.813.

What is zxAnSyncTime1ppsSrcCurrentQL?

Reports the current quality level of this 1PPS+ToD source, from locked through the G.811/G.812/G.813 clock classes down to unusable, qldnu. Admins use this as the live health readout for a specific configured timing source, complementing the switch-wide zxAn1588LocalClockFreqQltyLvl.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14
snmpwalk -v2c -c public <target> ZTE-AN-IEEE1588-MIB::zxAnSyncTime1ppsSrcCurrentQL

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14.1
snmpget -v2c -c public <target> ZTE-AN-IEEE1588-MIB::zxAnSyncTime1ppsSrcCurrentQL.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> zxAnSyncTime1ppsSrcCurrentQL.1

Start monitoring ZTE access nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-IEEE1588-MIB::zxAnSyncTime1ppsSrcCurrentQL OID value, configure state conditions and alerts, and monitor any ZTE access nodes from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.120zxAnClockSyncZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.120.15zxAnIeee1588MibZTE-AN-IEEE1588-MIB
1.3.6.1.4.1.3902.1082.120.15.2zxAnIeee1588ObjectsZTE-AN-IEEE1588-MIB
1.3.6.1.4.1.3902.1082.120.15.2.2zxAnIeee15881ppsObjectsZTE-AN-IEEE1588-MIB
1.3.6.1.4.1.3902.1082.120.15.2.2.3zxAnSyncTime1ppsSrcTableZTE-AN-IEEE1588-MIB
1.3.6.1.4.1.3902.1082.120.15.2.2.3.1zxAnSyncTime1ppsSrcEntryZTE-AN-IEEE1588-MIB
1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14zxAnSyncTime1ppsSrcCurrentQLZTE-AN-IEEE1588-MIB