All MIBs › ZTE-AN-IEEE1588-MIB › zxAn1ppsInputSignalQLThresh
zxAn1ppsInputSignalQLThresh
Module: ZTE-AN-IEEE1588-MIB
OID (symbolic): ZTE-AN-IEEE1588-MIB::zxAn1ppsInputSignalQLThresh
OID (numeric): 1.3.6.1.4.1.3902.1082.120.15.1.11.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 1PPS input signal quality level threshold. A zxAn1ppsInSignalQlBelowThreshAlm alarm will be generated when 1PPS input signal quality level of '1PPS+ToD' port is below the following threshold. locked(1): 1PPS input signal source is locked with grandmaster at this time. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. 1PPS input signal is in holdover state at this time by using PRC. qlssua(4): quality level of type I/V slave clock, it is defined in recommendation G.812. 1PPS input signal is in holdover state at this time by using SSU-A. qlssub(8): quality level of type VI slave clock, it is defined in recommendation G.812. 1PPS input signal is in holdover state at this time by using SSU-B. qlsec(11): quality level of SDH equipment clock, it is defined in recommendation G.813. 1PPS input signal is in holdover state at this time by using SEC.
What is zxAn1ppsInputSignalQLThresh?
Sets the minimum acceptable quality level for a '1PPS+ToD' input signal, either locked or one of the G.811/G.812/G.813 holdover clock classes; the device raises an alarm when the live 1PPS quality drops below it. Admins set this according to how degraded a holdover clock source they're willing to tolerate before wanting an alert.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.120.15.1.11.3 snmpwalk -v2c -c public <target> ZTE-AN-IEEE1588-MIB::zxAn1ppsInputSignalQLThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.120.15.1.11.3.1 snmpget -v2c -c public <target> ZTE-AN-IEEE1588-MIB::zxAn1ppsInputSignalQLThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.120.15.1.11.3.1 i <value>
Start monitoring ZTE access nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-IEEE1588-MIB::zxAn1ppsInputSignalQLThresh OID value, configure state conditions and alerts, and monitor any ZTE access nodes from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.120 | zxAnClockSync | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.120.15 | zxAnIeee1588Mib | ZTE-AN-IEEE1588-MIB |
| 1.3.6.1.4.1.3902.1082.120.15.1 | zxAnIeee1588GlobalObjects | ZTE-AN-IEEE1588-MIB |
| 1.3.6.1.4.1.3902.1082.120.15.1.11 | zxAnIeee1588AlmThreshObjects | ZTE-AN-IEEE1588-MIB |
| 1.3.6.1.4.1.3902.1082.120.15.1.11.3 | zxAn1ppsInputSignalQLThresh | ZTE-AN-IEEE1588-MIB |