All MIBs › ZTE-AN-GPON-ONUPRF-MIB › zxAnGponOPVlanPortCmd
zxAnGponOPVlanPortCmd
Module: ZTE-AN-GPON-ONUPRF-MIB
OID (symbolic): ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanPortCmd
OID (numeric): 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The command to operate VLAN list of 'zxAnGponOPVlanPortTable'.
The multi-variables binding rule should be complied with when a manager configures port VLAN cmd. According to this rule, all the related mib variables must be included in one SNMP set operation.
There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone.
To configure VLAN, the mandatory and optional variables are as follows: mandatoty: zxAnGponOPVlanPortCmd, zxAnGponOPVlanPortVid optional : none
There are two groups of operation command, the first group includes addVlan and delVlan, the second group includes addAllVlan and delAllVlan. For an ONU interface, two groups of operation command can't be use at the same time. When zxAnGponOPVlanPortCmd is addAllVlan or delAllVlan and then zxAnGponOPVlanPortVid is invalid.
What is zxAnGponOPVlanPortCmd?
The action to perform on this port's VLAN list: addVlan, delVlan, addAllVlan, or delAllVlan. Must be set together with zxAnGponOPVlanPortVid in the same SNMP set (except for the addAllVlan/delAllVlan pair, where the VID is ignored) - the two operation groups cannot be mixed on one interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1 snmpwalk -v2c -c public <target> ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanPortCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1.1 snmpget -v2c -c public <target> ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanPortCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1.1 i <value>
Start monitoring ZTE GPON OLT, ZTE GPON ONU (RF video overlay capable) (RF-overlay-profile config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanPortCmd OID value, configure state conditions and alerts, and monitor any ZTE GPON OLT, ZTE GPON ONU (RF video overlay capable) (RF-overlay-profile config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.500 | zxAnPon | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.21 | zxAnGponOnuPrfMib | ZTE-AN-GPON-ONUPRF-MIB |
| 1.3.6.1.4.1.3902.1082.500.21.2 | zxAnGponOnuPrfObjects | ZTE-AN-GPON-ONUPRF-MIB |
| 1.3.6.1.4.1.3902.1082.500.21.2.2 | zxAnGponOnuServicePrfObjects | ZTE-AN-GPON-ONUPRF-MIB |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3 | zxAnGponOPVlanPortCmdTable | ZTE-AN-GPON-ONUPRF-MIB |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1 | zxAnGponOPVlanPortCmdEntry | ZTE-AN-GPON-ONUPRF-MIB |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1 | zxAnGponOPVlanPortCmd | ZTE-AN-GPON-ONUPRF-MIB |