All MIBs › ZTE-AN-CFM2-MIB › zxAnCfm2MepTransLbmEnable
zxAnCfm2MepTransLbmEnable
Module: ZTE-AN-CFM2-MIB
OID (symbolic): ZTE-AN-CFM2-MIB::zxAnCfm2MepTransLbmEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/disable the LBM function.
What is zxAnCfm2MepTransLbmEnable?
Starts or stops a Loopback Message (LBM) test on this MEP: setting it enabled(1) triggers transmission of the configured number of loopback probes, and the device resets it to disabled(2) once the last LBM has been sent, per the multi-step SNMP procedure documented in the parent table's DESCRIPTION (poll until disabled, then SET together with snmpSetSerialNo to claim exclusive use before starting a new test).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2.1.1 snmpwalk -v2c -c public <target> ZTE-AN-CFM2-MIB::zxAnCfm2MepTransLbmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2.1.1.1 snmpget -v2c -c public <target> ZTE-AN-CFM2-MIB::zxAnCfm2MepTransLbmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2.1.1.1 i <value>
Start monitoring ZTE access node, carrier Ethernet aggregation switch (802.1ag/Y.1731 MEP continuity-check/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-CFM2-MIB::zxAnCfm2MepTransLbmEnable OID value, configure state conditions and alerts, and monitor any ZTE access node, carrier Ethernet aggregation switch (802.1ag/Y.1731 MEP continuity-check/fault status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.45 | zxAnCfm2Mib | ZTE-AN-CFM2-MIB |
| 1.3.6.1.4.1.3902.1082.80.45.2 | zxAnCfm2Objects | ZTE-AN-CFM2-MIB |
| 1.3.6.1.4.1.3902.1082.80.45.2.3 | zxAnCfm2MpObjects | ZTE-AN-CFM2-MIB |
| 1.3.6.1.4.1.3902.1082.80.45.2.3.21 | zxAnCfm2ConnectMeasureObjects | ZTE-AN-CFM2-MIB |
| 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2 | zxAnCfm2MepLoopBackOperTable | ZTE-AN-CFM2-MIB |
| 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2.1 | zxAnCfm2MepLoopBackOperEntry | ZTE-AN-CFM2-MIB |
| 1.3.6.1.4.1.3902.1082.80.45.2.3.21.2.1.1 | zxAnCfm2MepTransLbmEnable | ZTE-AN-CFM2-MIB |