All MIBs › ZHNLAYER2BRIDGING › sourceMACFromVendorClassIDFilterExclude
sourceMACFromVendorClassIDFilterExclude
Module: ZHNLAYER2BRIDGING
OID (symbolic): ZHNLAYER2BRIDGING::sourceMACFromVendorClassIDFilterExclude
OID (numeric): 1.3.6.1.4.1.5504.2.5.42.1.9.1.7
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendorClassIDFilter.
- If SourceMACFromVendorClassIDFilter is empty, no packets are admitted.
- If SourceMACFromVendorClassIDFilter is true on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendorClassIDFilter.
- If the SourceMACFromVendorClassIDFilter is empty, packets are admitted regardless of MAC address.
What is sourceMACFromVendorClassIDFilterExclude?
Flips the sense of the DHCP-Vendor-Class-ID MAC filter: false means only matching devices' traffic is admitted (and nothing is admitted if the match string is empty), while true means all traffic except that from matching devices is admitted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.2.5.42.1.9.1.7 snmpwalk -v2c -c public <target> ZHNLAYER2BRIDGING::sourceMACFromVendorClassIDFilterExclude
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.2.5.42.1.9.1.7.1 snmpget -v2c -c public <target> ZHNLAYER2BRIDGING::sourceMACFromVendorClassIDFilterExclude.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.2.5.42.1.9.1.7.1 s <value>
Start monitoring Zhone Technologies VoIP CPE devices (bridge-table capacity/port-membership/VLAN-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHNLAYER2BRIDGING::sourceMACFromVendorClassIDFilterExclude OID value, configure state conditions and alerts, and monitor any Zhone Technologies VoIP CPE devices (bridge-table capacity/port-membership/VLAN-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.2 | zhoneProduct | Zhone |
| 1.3.6.1.4.1.5504.2.5 | zhoneWtn | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.2.5.42 | zhnLayer2Bridging | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1 | layer2BridgingObjects | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.9 | filterBridgeTable | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.9.1 | filterBridgeEntry | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.9.1.7 | sourceMACFromVendorClassIDFilterExclude | ZHNLAYER2BRIDGING |